Download or read book Debugging Systems on Chip written by Bart Vermeulen and published by Springer. This book was released on 2014-07-14 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an approach and supporting infrastructure to facilitate debugging the silicon implementation of a System-on-Chip (SOC), allowing its associated product to be introduced into the market more quickly. Readers learn step-by-step the key requirements for debugging a modern, silicon SOC implementation, nine factors that complicate this debugging task, and a new debug approach that addresses these requirements and complicating factors. The authors’ novel communication-centric, scan-based, abstraction-based, run/stop-based (CSAR) debug approach is discussed in detail, showing how it helps to meet debug requirements and address the nine, previously identified factors that complicate debugging silicon implementations of SOCs. The authors also derive the debug infrastructure requirements to support debugging of a silicon implementation of an SOC with their CSAR debug approach. This debug infrastructure consists of a generic on-chip debug architecture, a configurable automated design-for-debug flow to be used during the design of an SOC, and customizable off-chip debugger software. Coverage includes an evaluation of the efficiency and effectiveness of the CSAR approach and its supporting infrastructure, using six industrial SOCs and an illustrative, example SOC model. The authors also quantify the hardware cost and design effort to support their approach.
Download or read book On Chip Instrumentation written by Neal Stollon and published by Springer Science & Business Media. This book was released on 2010-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth overview of on chip instrumentation technologies and various approaches taken in adding instrumentation to System on Chip (ASIC, ASSP, FPGA, etc.) design that are collectively becoming known as Design for Debug (DfD). On chip instruments are hardware based blocks that are added to a design for the specific purpose and improving the visibility of internal or embedded portions of the design (specific instruction flow in a processor, bus transaction in an on chip bus as examples) to improve the analysis or optimization capabilities for a SoC. DfD is the methodology and infrastructure that surrounds the instrumentation. Coverage includes specific design examples and discussion of implementations and DfD tradeoffs in a decision to design or select instrumentation or SoC that include instrumentation. Although the focus will be on hardware implementations, software and tools will be discussed in some detail.
Download or read book Debugging at the Electronic System Level written by Frank Rogin and published by Springer Science & Business Media. This book was released on 2010-06-17 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging becomes more and more the bottleneck to chip design productivity, especially while developing modern complex integrated circuits and systems at the Electronic System Level (ESL). Today, debugging is still an unsystematic and lengthy process. Here, a simple reporting of a failure is not enough, anymore. Rather, it becomes more and more important not only to find many errors early during development but also to provide efficient methods for their isolation. In Debugging at the Electronic System Level the state-of-the-art of modeling and verification of ESL designs is reviewed. There, a particular focus is taken onto SystemC. Then, a reasoning hierarchy is introduced. The hierarchy combines well-known debugging techniques with whole new techniques to improve the verification efficiency at ESL. The proposed systematic debugging approach is supported amongst others by static code analysis, debug patterns, dynamic program slicing, design visualization, property generation, and automatic failure isolation. All techniques were empirically evaluated using real-world industrial designs. Summarized, the introduced approach enables a systematic search for errors in ESL designs. Here, the debugging techniques improve and accelerate error detection, observation, and isolation as well as design understanding.
Download or read book Debugging Embedded Microprocessor Systems written by Stuart Ball and published by Elsevier. This book was released on 1998-05-12 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging Embedded Microprocessor Systems provides techniques for engineers, technicians, and students who need to correct design faults in embedded systems. Using real-world scenarios, designers can learn practical, time-saving ways to avoid and repair potentially costly problems. Prevention is stressed. In this book, the author addresses hardware and software issues, including up-front design techniques to prevent bugs and contain design creep. Practical advice includes descriptions of common tools which can be used to help identify and repair bugs, as well as test routines. RTOS and embedded PC environments are also covered. Each chapter of Debugging Embedded Microprocessor Systems opens with an example design problem which illustrates real-world issues such as design changes, time pressures, equipment or component availability, etc. Case studies of past debugging projects are presented in the final chapter. - Addresses real-world issues like design changes, time pressures, equipment or component availability - Practical, time-saving methods for preventing and correcting design problems - Covers debugging tools and programmer test routines
Download or read book Heterogeneous SoC Design and Verification written by Khaled Salah Mohamed and published by Springer Nature. This book was released on with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hardware software debugging techniques for reconfigurable systems on chip written by Guillermo Talavera and published by . This book was released on 2003 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Debugging Embedded and Real Time Systems written by Arnold S. Berger and published by Newnes. This book was released on 2020-07-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging Embedded and Real-Time Systems: The Art, Science, Technology and Tools of Real-Time System Debugging gives a unique introduction to debugging skills and strategies for embedded and real-time systems. Practically focused, it draws on application notes and white papers written by the companies who create design and debug tools. Debugging Embedded and Real Time Systems presents best practice strategies for debugging real-time systems, through real-life case studies and coverage of specialized tools such as logic analysis, JTAG debuggers and performance analyzers. It follows the traditional design life cycle of an embedded system and points out where defects can be introduced and how to find them and prevent them in future designs. It also studies application performance monitoring, the execution trace recording of individual applications, and other tactics to debug and control individual running applications in the multitasking OS. Suitable for the professional engineer and student, this book is a compendium of best practices based on the literature as well as the author's considerable experience as a tools' developer. - Provides a unique reference on Debugging Embedded and Real-Time Systems - Presents best practice strategies for debugging real-time systems - Written by an author with many years of experience as a tools developer - Includes real-life case studies that show how debugging skills can be improved - Covers logic analysis, JTAG debuggers and performance analyzers that are used for designing and debugging embedded systems
Download or read book Debugging written by David J. Agans and published by HarperChristian + ORM. This book was released on 2002-09-23 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the pressure is on to resolve an elusive software or hardware glitch, what’s needed is a cool head courtesy of a set of rules guaranteed to work on any system, in any circumstance. Written in a frank but engaging style, this book provides simple, foolproof principles guaranteed to help find any bug quickly. Recognized tech expert and author David Agans changes the way you think about debugging, making those pesky problems suddenly much easier to find and fix. Agans identifies nine simple, practical rules that are applicable to any software application or hardware system, which can help detect any bug, no matter how tricky or obscure. Illustrating the rules with real-life bug-detection war stories, Debugging shows you how to: Understand the system: how perceiving the ""roadmap"" can hasten your journey Quit thinking and look: when hands-on investigation can’t be avoided Isolate critical factors: why changing one element at a time can be an essential tool Keep an audit trail: how keeping a record of the debugging process can win the day Whether the system or program you’re working on has been designed wrong, built wrong, or used wrong, Debugging helps you think correctly about bugs, so the problems virtually reveal themselves.
Download or read book Embedded Microprocessor Systems written by Stuart Ball and published by Elsevier. This book was released on 2002-12-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The less-experienced engineer will be able to apply Ball's advice to everyday projects and challenges immediately with amazing results. In this new edition, the author has expanded the section on debug to include avoiding common hardware, software and interrupt problems. Other new features include an expanded section on system integration and debug to address the capabilities of more recent emulators and debuggers, a section about combination microcontroller/PLD devices, and expanded information on industry standard embedded platforms. - Covers all 'species' of embedded system chips rather than specific hardware - Learn how to cope with 'real world' problems - Design embedded systems products that are reliable and work in real applications
Download or read book Openocd Open On Chip Debugger Reference Manual written by and published by . This book was released on 2015-10-24 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. It does so with the assistance of a debug adapter, which is a small hardware module which helps provide the right kind of electrical signaling to the target being debugged. These are required since the debug host (on which OpenOCD runs) won't usually have native support for such signaling, or the connector needed to hook up to the target.
Download or read book Post Silicon Validation and Debug written by Prabhat Mishra and published by Springer. This book was released on 2018-09-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive coverage of System-on-Chip (SoC) post-silicon validation and debug challenges and state-of-the-art solutions with contributions from SoC designers, academic researchers as well as SoC verification experts. The readers will get a clear understanding of the existing debug infrastructure and how they can be effectively utilized to verify and debug SoCs.
Download or read book Programming Model Centric Debugging for Multicore Embedded Systems written by Kevin Pouget and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, we propose to study interactive debugging of applications running on embedded systems Multi-Processor System on Chip (MPSoC). A literature study showed that nowadays, the design and development of these applications rely more and more on programming models and development frameworks. These environments gather established algorithmic and programming good-practices, and hence speed up the development process of applications running on MPSoC processors. However, sound programming models are not always sufficient to reach or approach error-free codes, especially in the case of dynamic programming, where they offer little to no help. Our contribution to lighten these challenges consists in a novel approach for interac- tive debugging, named Programming Model-Centric Debugging, as well as a prototype debugger implementation. Model-centric debugging raises interactive debugging to the level of programming models, by capturing and interpreting events generated during the application execution (e.g. through breakpointed API function calls). We illustrate how we applied this approach to three different programming models, software components, dataflow and kernel-based programming. Then, we detail how we developed a debugger prototype based on GDB, for STMicroelectronics's STHORM programming environment. STHORM development toolkit provides supportive environments for component, dataflow and kernel-based programming. We also demonstrate how to tackle software debugging with our debugger prototype through four case studies: an augmented reality feature tacker built with components, a dataflow implementation of the H.264 video decoding standard and two scientific HPC computing applications.
Download or read book Multi Core Embedded Systems written by Georgios Kornaros and published by CRC Press. This book was released on 2018-10-08 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details a real-world product that applies a cutting-edge multi-core architecture Increasingly demanding modern applications—such as those used in telecommunications networking and real-time processing of audio, video, and multimedia streams—require multiple processors to achieve computational performance at the rate of a few giga-operations per second. This necessity for speed and manageable power consumption makes it likely that the next generation of embedded processing systems will include hundreds of cores, while being increasingly programmable, blending processors and configurable hardware in a power-efficient manner. Multi-Core Embedded Systems presents a variety of perspectives that elucidate the technical challenges associated with such increased integration of homogeneous (processors) and heterogeneous multiple cores. It offers an analysis that industry engineers and professionals will need to understand the physical details of both software and hardware in embedded architectures, as well as their limitations and potential for future growth. Discusses the available programming models spread across different abstraction levels The book begins with an overview of the evolution of multiprocessor architectures for embedded applications and discusses techniques for autonomous power management of system-level parameters. It addresses the use of existing open-source (and free) tools originating from several application domains—such as traffic modeling, graph theory, parallel computing and network simulation. In addition, the authors cover other important topics associated with multi-core embedded systems, such as: Architectures and interconnects Embedded design methodologies Mapping of applications
Download or read book Embedded Software Verification and Debugging written by Djones Lettnin and published by Springer. This book was released on 2017-04-17 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of verification and debugging techniques for embedded software, which is frequently used in safety critical applications (e.g., automotive), where failures are unacceptable. Since the verification of complex systems needs to encompass the verification of both hardware and embedded software modules, this book focuses on verification and debugging approaches for embedded software with hardware dependencies. Coverage includes the entire flow of design, verification and debugging of embedded software and all key approaches to debugging, dynamic, static, and hybrid verification. This book discusses the current, industrial embedded software verification flow, as well as emerging trends with focus on formal and hybrid verification and debugging approaches.
Download or read book Debug Automation from Pre Silicon to Post Silicon written by Mehdi Dehbashi and published by Springer. This book was released on 2014-09-25 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes automated debugging approaches for the bugs and the faults which appear in different abstraction levels of a hardware system. The authors employ a transaction-based debug approach to systems at the transaction-level, asserting the correct relation of transactions. The automated debug approach for design bugs finds the potential fault candidates at RTL and gate-level of a circuit. Debug techniques for logic bugs and synchronization bugs are demonstrated, enabling readers to localize the most difficult bugs. Debug automation for electrical faults (delay faults)finds the potentially failing speedpaths in a circuit at gate-level. The various debug approaches described achieve high diagnosis accuracy and reduce the debugging time, shortening the IC development cycle and increasing the productivity of designers. Describes a unified framework for debug automation used at both pre-silicon and post-silicon stages; Provides approaches for debug automation of a hardware system at different levels of abstraction, i.e., chip, gate-level, RTL and transaction level; Includes techniques for debug automation of design bugs and electrical faults, as well as an infrastructure to debug NoC-based multiprocessor SoCs.
Download or read book System on Chip Interfaces for Low Power Design written by Sanjeeb Mishra and published by Morgan Kaufmann. This book was released on 2015-11-17 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: System on Chip Interfaces for Low Power Design provides a top-down understanding of interfaces available to SoC developers, not only the underlying protocols and architecture of each, but also how they interact and the tradeoffs involved. The book offers a common context to help understand the variety of available interfaces and make sense of technology from different vendors aligned with multiple standards. With particular emphasis on power as a factor, the authors explain how each interface performs in various usage scenarios and discuss their advantages and disadvantages. Readers learn to make educated decisions on what interfaces to use when designing systems and gain insight for innovating new/custom interfaces for a subsystem and their potential impact. - Provides a top-down guide to SoC interfaces for memory, multimedia, sensors, display, and communication - Explores the underlying protocols and architecture of each interface with multiple examples - Guides through competing standards and explains how different interfaces might interact or interfere with each other - Explains challenges in system design, validation, debugging and their impact on development
Download or read book DSP Software Development Techniques for Embedded and Real Time Systems written by Robert Oshana and published by Elsevier. This book was released on 2006-01-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's embedded and real-time systems contain a mix of processor types: off-the-shelf microcontrollers, digital signal processors (DSPs), and custom processors. The decreasing cost of DSPs has made these sophisticated chips very attractive for a number of embedded and real-time applications, including automotive, telecommunications, medical imaging, and many others—including even some games and home appliances. However, developing embedded and real-time DSP applications is a complex task influenced by many parameters and issues. DSP Software Development Techniques for Embedded and Real-Time Systems is an introduction to DSP software development for embedded and real-time developers giving details on how to use digital signal processors efficiently in embedded and real-time systems. The book covers software and firmware design principles, from processor architectures and basic theory to the selection of appropriate languages and basic algorithms. The reader will find practical guidelines, diagrammed techniques, tool descriptions, and code templates for developing and optimizing DSP software and firmware. The book also covers integrating and testing DSP systems as well as managing the DSP development effort. - Digital signal processors (DSPs) are the future of microchips! - Includes practical guidelines, diagrammed techniques, tool descriptions, and code templates to aid in the development and optimization of DSP software and firmware
