Download or read book Multipactor in Accelerating Cavities written by Valery D. Shemelin and published by Springer Nature. This book was released on 2020-08-10 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by two world-recognized experts in radio frequency (RF) systems for particle accelerators and is based on many years of experience in dealing with the multipactor phenomenon. The authors introduce and review multipactor in RF cavities for scientists and engineers working in the field of accelerator physics and technology. The multipactor phenomenon of unintended electron avalanches occurs in the RF cavities commonly and quite often is a performance-limiting factor. The book starts with an Introductory Overview which contains historical observations and brief description of most common aspects of the phenomenon. Part I deals with the multipactor in a flat gap. It starts with description of the dynamics of electrons, derivation of the stability condition and analyzing influence of several factors on the multipactor. Then, the initial considerations are extended to derive a generalized phase stability and finally a particular case, called ping-pong multipacting, is considered. The part one is concluded with a brief review of computer codes used in multipactor simulations. Part II is dedicated to the multipactor in crossed RF fields, the typical situation in accelerating cavities. Two cases of MP are considered: a two-point multipactor near the cavity equator in elliptical cavities and a one-point multipactor. Part III describes optimization of the cavity shapes geared toward designing multipactor-free structures. The book will serve as an importance reference on multipactor for those involved in developing and operating radio frequency cavities for particle accelerators.

Download or read book Handbook Of Accelerator Physics And Engineering Third Edition written by Alexander Wu Chao and published by World Scientific. This book was released on 2023-02-02 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing many new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to common formulae of previous compilations, hard to find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practioners of the art and science of accelerators.The seven chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities due to the various interactions mentioned. A chapter on operational considerations including discussions on the assessment and correction of orbit and optics errors, realtime feedbacks, generation of short photon pulses, bunch compression, phase-space exchange, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cryogenic vacuum systems, steady state microbuching, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes, machine learning, multiple frequency rf systems, FEL seeding, ultrafast electron diffraction, and Gamma Factory. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement, including undulators, and acceleration (both normal and superconducting) receive detailed treatment in a sub-systems chapter, beam measurement and apparatus being treated therein as well.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book Handbook Of Accelerator Physics And Engineering 2nd Edition written by Alexander Wu Chao and published by World Scientific. This book was released on 2013-03-25 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book Cryogenic Heat Management written by Jonathan Demko and published by CRC Press. This book was released on 2022-07-21 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic engineering (cryogenics) is the production, preservation, and use or application of cold. This book presents a comprehensive introduction to designing systems to deal with heat – effective management of cold, exploring the directing (or redirecting), promoting, or inhibiting this flow of heat in a practical way. It provides a description of the necessary theory, design methodology, and advanced demonstrations (thermodynamics, heat transfer, thermal insulation, fluid mechanics) for many frequently occurring situations in low-temperature apparatus. This includes systems that are widely used such as superconducting magnets for magnetic resonance imaging (MRI), high-energy physics, fusion, tokamak and free electron laser systems, space launch and exploration, and energy and transportation use of liquid hydrogen, as well as potential future applications of cryo-life sciences and chemical industries. The book is written with the assumption that the reader has an undergraduate understanding of thermodynamics, heat transfer, and fluid mechanics, in addition to the mechanics of materials, material science, and physical chemistry. Cryogenic Heat Management: Technology and Applications for Science and Industry will be a valuable guide for those researching, teaching, or working with low-temperature or cryogenic systems, in addition to postgraduates studying the topic. Key features: Presents simplified but useful and practical equations that can be applied in estimating performance and design of energy-efficient systems in low-temperature systems or cryogenics Contains practical approaches and advanced design materials for insulation, shields/anchors, cryogen vessels/pipes, calorimeters, cryogenic heat switches, cryostats, current leads, and RF couplers Provides a comprehensive introduction to the necessary theory and models needed for solutions to common difficulties and illustrates the engineering examples with more than 300 figures

Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.

Download or read book Beam Dynamics Issues of High Luminosity Asymmetric Collider Rings written by Andrew Marienhoff Sessler and published by AIP Conference Proceedings (Nu. This book was released on 1990 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Albuquerque Convention Center was the venue for the 1993 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Walter F. Stewart, of Los Alamos National Laboratory, was conference chairman. Albuquerque is near Los Alamos National Laboratory which has been a significant contributor to the cryogenics community since the early days of the Manhattan Project. Albuquerque is also the home of the Air Force's Phillips Laboratory which has a lead role in developing cryocoolers. The program consisted of 322 CEC papers, more than a 30% increase from CEC-91 and 20% more than CEC-89. This was the largest number of papers ever submitted to the CEC. Of these, 249 papers are published here, in Volume 39 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a cumulative index for the CEC volumes from 1975-1993 (volumes 21,23,25,27,29,31,33,35,37, and 39 of Advances in Cryogenic Engineering). The first 20 volumes are indexed in Volume 20. A companion cumulative index for the ICMC volumes (volumes 22 through 40) appears in Volume 40. This is my first volume as editor. I would not have been able to have done it without the assistance of the many reviewers. Especially appreciated was the instruction manual left me by the previous editor, Ron Fast.

Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.

Download or read book CAS Cern Accelerator School Radio Frequency Engineering Seeheim Germany 8 16 May 2000 Proceedings written by European Organization for Nuclear Research and published by . This book was released on 2005 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 1986 Linear Accelator Conference Proceedings written by and published by . This book was released on 1986 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Toward a Science Campus in Milan written by Pier Francesco Bortignon and published by Springer. This book was released on 2018-12-08 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of multidisciplinary papers presented at the Department of Physics of Milan University's congress on 28 and 29 June 2017, which was also intended as a kick-off meeting for the design of a novel science campus at the Expo site in Milan. The congress presented a snapshot of the department's research to the academic community, the media, policymakers and authorities as well as the public at large, and also provided an opportunity to strengthen interdisciplinary collaborations between the members of the department and other communities. This book is a valuable resource for scientists looking for synergetic projects, policymakers wanting to grasp scientists' points of view and for prospective graduate students seeking expanding areas of research.

Download or read book RF Linear Accelerators written by Thomas P. Wangler and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses einschlägige Lehrbuch, entwickelt auf der Grundlage der Ausbildung an der US Particle Accelerator School, schließt eine Lücke in der verfügbaren Literatur zum Thema Hochfrequenz-Linearbeschleuniger, kurz RF-Linac. Nach einer Erläuterung der naturwissenschaftlichen Grundlagen und der neuesten technologischen Eckdaten stellt diese zweite Auflage neueste RF-Linacs, spezialisierte Systeme, Systeme mit Supraleitern und verschiedene Spezialverfahren vor. Übungsaufgaben an den Kapitelenden erleichtern das Einprägen und das Nacharbeiten von Vorlesungen.

Download or read book Synchrotron Light Sources and Free Electron Lasers written by Eberhard J. Jaeschke and published by Springer. This book was released on 2016-05-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardly any other discovery of the nineteenth century did have such an impact on science and technology as Wilhelm Conrad Röntgen’s seminal find of the X-rays. X-ray tubes soon made their way as excellent instruments for numerous applications in medicine, biology, materials science and testing, chemistry and public security. Developing new radiation sources with higher brilliance and much extended spectral range resulted in stunning developments like the electron synchrotron and electron storage ring and the freeelectron laser. This handbook highlights these developments in fifty chapters. The reader is given not only an inside view of exciting science areas but also of design concepts for the most advanced light sources. The theory of synchrotron radiation and of the freeelectron laser, design examples and the technology basis are presented. The handbook presents advanced concepts like seeding and harmonic generation, the booming field of Terahertz radiation sources and upcoming brilliant light sources driven by laser-plasma accelerators. The applications of the most advanced light sources and the advent of nanobeams and fully coherent x-rays allow experiments from which scientists in the past could not even dream. Examples are the diffraction with nanometer resolution, imaging with a full 3D reconstruction of the object from a diffraction pattern, measuring the disorder in liquids with high spatial and temporal resolution. The 20th century was dedicated to the development and improvement of synchrotron light sources with an ever ongoing increase of brilliance. With ultrahigh brilliance sources, the 21st century will be the century of x-ray lasers and their applications. Thus, we are already close to the dream of condensed matter and biophysics: imaging single (macro)molecules and measuring their dynamics on the femtosecond timescale to produce movies with atomic resolution.

Download or read book Handbook of Accelerator Physics and Engineering written by Alexander Wu Chao and published by World Scientific. This book was released on 2013 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world''s most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book FOUNDATIONS FOR MICROWAVE ENGINEERING 2ND ED written by Robert E. Collin and published by John Wiley & Sons. This book was released on 2007 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: About The Book: The book covers the major topics of microwave engineering. Its presentation defines the accepted standard for both advanced undergraduate and graduate level courses on microwave engineering. It is an essential reference book for the practicing microwave engineer

Download or read book Physics and Applications of Secondary Electron Emission written by H. Bruining and published by Elsevier. This book was released on 2016-01-11 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Applications of Secondary Electron Emission provides a survey of the physics and applications of secondary electron emission. It is part of a series of monographs that aim to report on research carried out in electronics and applied physics. The monographs are written by specialists in their own subjects. Wherever it is practical the monographs will be kept short in length to enable all those interested in electronics to find the essentials necessary for their work in a condensed and concentrated form. The book begins with a discussion of secondary electrons. Separate chapters cover methods for measuring secondary electron emission; numerical results on the secondary electron emission yield of both metals and metal compounds; the influence of externally adsorbed foreign atoms and ions on secondary electron emission; and the mechanism of secondary electron emission. The final three chapters deal with the application side. These include the applications of electron multiplication; the elimination of disturbing effects due to secondary electrons; and ""storage"" devices in which information on electrical charges is written on an insulating surface, often by making use of secondary electron emission.

Download or read book Proceedings of the 1993 Particle Accelerator Conference written by and published by . This book was released on 1993 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: