Download or read book Creep and Fracture of Engineering Materials and Structures written by T. Sakuma and published by Trans Tech Publications Ltd. This book was released on 1999-10-12 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 8th International Conference on Creep and Fracture of Engineering Materials and Structures, held in Tsukuba, Japan, November 1-5, 1999

Download or read book Materials for Advanced Power Engineering 1994 written by D. Coutsouradis and published by Springer Science & Business Media. This book was released on 1994 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of energy in the modern world goes beyond mere technology and economics to influence welfare, the environment, the quality of life and, in broad terms, civilization itself. Since the Industrial Revolution, energy conservation technology has been at the forefront of the innovation required to satisfy the needs of mankind and, more than any other, this technology has always depended on the performance of the materials used.

Download or read book Low cycle Fatigue and Life Prediction written by Claude Amzallag and published by ASTM International. This book was released on 1982 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elevated Termperature Fatigue Properties of D6AC High Strength Steel written by Sidney O. Davis and published by . This book was released on 1963 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: A program was conducted to obtain complete stress versus number of cycles (S-N) curves for D6AC steel heat treated to an ultimate strength of 270 KSI. Tension-tension fatigue tests were conducted on notched and unnotched specimens at 75, 450, and 550 F for stress ratios of 1 and infinity. Tensile and stress rupture data were obtained in conjunction with the fatigue data.

Download or read book A Review of Fatigue Crack Growth of Pressure Vessel and Piping Steels in High temperature Pressurized Reactor grade Water written by W. H. Cullen and published by . This book was released on 1980 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue crack growth data sets, for pressure vessel and piping steels, in reactor-grade water environment have appeared in various reports and publications since about 1972. All of the results which have been published from 1972 through 1979 have been plotted and are presented in this report. Beginning with a discussion of the need for these data, and an explanation of the laboratory facilities which are required for this research, this report goes on to describe the overall trends which have evolved through consideration of the data sets and the conditions under which they were generated. A model for hydrogen assisted fatigue crack growth is described and applied to the pressurized water reactor type of environment. A complete listing of references is included in the report. (Author).

Download or read book Application of 2 1 4cr 1mo Steel for Thick wall Pressure Vessels written by G. S. Sangdahl and published by ASTM International. This book was released on 1982 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Properties of Mar aging Steels written by D. C. Drennen and published by . This book was released on 1962 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monotonic and Ultra Low Cycle Fatigue Behaviour of Pipeline Steels written by António Augusto Fernandes and published by Springer. This book was released on 2018-06-15 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the development of innovative computational methodologies for the simulation of steel material fracture under both monotonic and ultra-low-cycle fatigue. The main aspects are summarised as follows: i) Database of small and full-scale testing data covering the X52, X60, X65, X70 and X80 piping steel grades. Monotonic and ULCF tests of pipe components were performed (buckled and dented pipes, elbows and straight pipes). ii) New constitutive models for both monotonic and ULCF loading are proposed. Besides the Barcelona model, alternative approaches are presented such as the combined Bai-Wierzbicki-Ohata-Toyoda model. iii) Developed constitutive models are calibrated and validated using experimentally derived testing data. Guidelines for damage simulation are included. The book could be seen as a comprehensive repository of experimental results and numerical modeling on advanced methods dealing with Ultra Low Cycle Fatigue of Pipelines when subjected to high strain loading conditions.

Download or read book Fatigue at High Temperature written by and published by ASTM International. This book was released on 1969 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.

Download or read book Report on the Elevated temperature Properties of the Chromium molybdenum Steels written by Ward F. Simmons and published by . This book was released on 1966 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of the Low Cycle Fatigue Properties of Hot Rolled Sheet Steels written by T. E. Parker and published by . This book was released on 1979 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Supplemental Report on the Elevated Temperature Properties of Chromium Molybdenum Steels written by G. Smith and published by . This book was released on 1986-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Specification for Flat Products Made of Steels for Pressure Purposes Weldable Fine Grain Steels Quenched and Tempered written by British Standards Institute Staff and published by . This book was released on 2003-07-16 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels, Pressure vessels, Alloy steels, Heat-treatable steels, Low-temperature steels, Sheet materials, Strips, Weldability, Fine-grain material, Chemical composition, Mechanical properties of materials