Download or read book Damage Tolerance of Metallic Aircraft Structures written by Sérgio M. O. Tavares and published by Springer. This book was released on 2018-08-06 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art review of the fail-safe and damage tolerance approaches, allowing weight savings and increasing aircraft reliability and structural integrity. The application of the damage tolerance approach requires extensive know-how of the fatigue and fracture properties, corrosion strength, potential failure modes and non-destructive inspection techniques, particularly minimum detectable defect and inspection intervals. In parallel, engineering practice involving damage tolerance requires numerical techniques for stress analysis of cracked structures. These evolved from basic mode I evaluations using rough finite element approaches, to current 3D modeling based on energetic approaches as the VCCT, or simulation of joining processes. This book provides a concise introduction to this subject.
Download or read book Damage Tolerance in Aircraft Structures written by M. S. Rosenfeld and published by ASTM International. This book was released on 1971-03 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Tolerance in Aircraft Structures written by American Society for Testing and Materials and published by ASTM International. This book was released on 1971 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book USAF Damage Tolerant Design Handbook written by and published by . This book was released on 1984 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Sustainment and Repair written by Rhys Jones and published by Butterworth-Heinemann. This book was released on 2017-12-05 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. Covers corrosion damage assessment and management in aircraft structures Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services
Download or read book USAF Damage Tolerant Design Handbook written by and published by . This book was released on 1984 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Durability and Damage Tolerance Design and Analysis Methods for Composite Structures Lessons Learned from NASA Technology Development Programs written by Charles E. Harris and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bonded Repair of Aircraft Structures written by A. Baker and published by Springer Science & Business Media. This book was released on 1988-05-31 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conventional approach to through-life-support for aircraft structures can be divided into the following phases: (i) detection of defects, (ii) diagnosis of their nature and significance, (iii) forecasting future behaviour-prognosis, and (iv) pre scription and implementation of remedial measures including repairs. Considerable scientific effort has been devoted to developing the science and technology base for the first three phases. Of particular note is the development of fracture mechanics as a major analytical tool for metals, for predicting residual strength in the presence of cracks ( damage tolerance) and rate of crack propagation under service loading. Intensive effort is currently being devoted to developing similar approaches for fibre composite structures, particularly to assess damage tolerance and durability in the presence of delamination damage. Until recently there has been no major attempt to develop a science and tech nology base for the last phase, particularly with respect to the development of repairs. Approaches are required which will allow assessment of the type and magnitude of defects amenable to repair and the influence of the repair on the stress intensity factor (or some related parameter). Approaches are also required for the development and design of optimum repairs and for assessment of their durability.
Download or read book Damage Tolerance in Aircraft Structures written by American Society for Testing and Materials and published by . This book was released on 1971 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Damage Tolerance in Aircraft Structures written by and published by . This book was released on 1971 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Structures and Materials written by Yucheng Liu and published by Bentham Science Publishers. This book was released on 2016-10-07 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume presents a wide spectrum of information about the design, analysis and manufacturing of aerospace structures and materials. Readers will find an interesting compilation of reviews covering several topics such as structural dynamics and impact simulation, acoustic and vibration testing and analysis, fatigue analysis and life optimization, reversing design methodology, non-destructive evaluation, remotely piloted helicopters, surface enhancement of aerospace alloys, manufacturing of metal matrix composites, applications of carbon nanotubes in aircraft material design, carbon fiber reinforcements, variable stiffness composites, aircraft material selection, and much more. This volume is a key reference for graduates undertaking advanced courses in materials science and aeronautical engineering as well as researchers and professional engineers seeking to increase their understanding of aircraft material selection and design.
Download or read book Damage Tolerance of Metallic Structures written by J. B. Chang and published by ASTM International. This book was released on 1984 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Damage Tolerance of Aircraft Structures written by Rinze Benedictus and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aging of U S Air Force Aircraft written by National Research Council and published by National Academies Press. This book was released on 1997-09-30 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the aircraft that form the backbone of the U.S. Air Force operational fleet are 25 years old or older. A few of these will be replaced with new aircraft, but many are expected to remain in service an additional 25 years or more. This book provides a strategy to address the technical needs and priorities associated with the Air Force's aging airframe structures. It includes a detailed summary of the structural status of the aging force, identification of key technical issues, recommendations for near-term engineering and management actions, and prioritized near-term and long-term research recommendations.
Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.
