Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Damage Growth in Aerospace Composites written by Aniello Riccio and published by Springer. This book was released on 2015-01-07 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel methods for the simulation of damage evolution in aerospace composites that will assist in predicting damage onset and growth and thus foster less conservative designs which realize the promised economic benefits of composite materials. The presented integrated numerical/experimental methodologies are capable of taking into account the presence of damage and its evolution in composite structures from the early phases of the design (conceptual design) through to the detailed finite element method analysis and verification phase. The book is based on the GARTEUR Research Project AG-32, which ran from 2007 to 2012, and documents the main results of that project. In addition, the state of the art in European projects on damage evolution in composites is reviewed. While the high specific strength and stiffness of composite materials make them suitable for aerospace structures, their sensitivity to damage means that designing with composites is a challenging task. The new approaches described here will prove invaluable in meeting that challenge.
Download or read book Fatigue in Composites written by Bryan Harris and published by Woodhead Publishing. This book was released on 2003-10-31 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of work on the fatigue behavior of composites dealing with the problems met with by materials scientists and designers in aerospace, automotive, marine, and structural engineering. Including a historical review, standards, micromechanical aspects, life-prediction methods for constant stress and variable stress, and fatigue in practical situations.
Download or read book Damage and Fracture of Composite Materials and Structures written by Mohd Nasir Tamin and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent research findings on fracture properties and behavior of the composites, and their damage and cracking process under both quasi-static and impact loading conditions. Theoretical treatment, experimental investigation and numerical simulation aspects of the mechanics of composites, including sandwich structures are included.
Download or read book Damage Mechanics of Composite Materials written by R. Talreja and published by Elsevier Science. This book was released on 1994 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage mechanics is concerned with mechanics-based analyses of microstructural events in solids responsible for changes in their response to external loading. The microstructural events can occur as cracks, voids, slipped regions, etc., with a spatial distribution within the volume of a solid. If a solid contains oriented elements in its microsctructure, e.g. fibers, the heterogeneity and asisotropy aspects create situations which form a class of problems worthy of special treatment. This book deals with such treatments with particular emphasis on application to technological composite materials. Chapter one describes the basic principles underlying both the micromechanics approach and the continuum damage mechanics approach. It also reviews the relevant statistical concepts. The next three chapters are devoted to developments of the continuum damage mechanics approach related to characterization of damage with internal variables, evolution of damage and its coupling with other inelastic effects such as plasticity. Chapter 5 describes observations of damage from notches in composite laminates and puts forward some pragmatic modelling ideas for a complex damage configuration. The next two chapters form the bulk of the micromechanics approach in this volume. The first one deals with microcracking and the other with interfacial damage in composite materials.
Download or read book Fatigue of Composite Materials written by K.L. Reifsnider and published by Elsevier. This book was released on 2012-12-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first comprehensive review of its kind on the long-term behaviour of composite materials and structures subjected to time variable mechanical, thermal, and chemical influences, a subject of critical importance to the design, development, and certification of high performance engineering structures. Specific topics examined include damage, damage characterization, and damage mechanics; fatigue testing and evaluation; fatigue behaviour of short and long fibre reinforced polymer and metal matrix materials; viscoelastic and moisture effects; delamination; statistical considerations; the modeling of cumulative damage development; and life prediction. The volume provides an extensive presentation of data, discussions, and comparisons on the behaviour of the major types of material systems in current use, as well as extensive analysis and modeling (including the first presentation of work not found elsewhere). The book will be of special interest to engineers concerned with reliability, maintainability, safety, certification, and damage tolerance; to materials developers concerned with making materials for long-term service, especially under severe loads and environments, and to lecturers, students, and researchers involved in material system design, performance, solid mechanics, fatigue, durability, and composite materials. The scope of the work extends from entry level material to the frontiers of the subject.
Download or read book Numerical Modelling of Failure in Advanced Composite Materials written by Pedro P. Camanho and published by Woodhead Publishing. This book was released on 2015-08-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modelling of Failure in Advanced Composite Materials comprehensively examines the most recent analysis techniques for advanced composite materials. Advanced composite materials are becoming increasingly important for lightweight design in aerospace, wind energy, and mechanical and civil engineering. Essential for exploiting their potential is the ability to reliably predict their mechanical behaviour, particularly the onset and propagation of failure. Part One investigates numerical modeling approaches to interlaminar failure in advanced composite materials. Part Two considers numerical modelling approaches to intralaminar failure. Part Three presents new and emerging advanced numerical algorithms for modeling and simulation of failure. Part Four closes by examining the various engineering and scientific applications of numerical modeling for analysis of failure in advanced composite materials, such as prediction of impact damage, failure in textile composites, and fracture behavior in through-thickness reinforced laminates. - Examines the most recent analysis models for advanced composite materials in a coherent and comprehensive manner - Investigates numerical modelling approaches to interlaminar failure and intralaminar failure in advanced composite materials - Reviews advanced numerical algorithms for modeling and simulation of failure - Examines various engineering and scientific applications of numerical modelling for analysis of failure in advanced composite materials
Download or read book Damage in Composite Materials written by K. Reifsnider and published by ASTM International. This book was released on 1982 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores damage growth and fracture processes in cementitious, ceramic, polymer and metal matrix composites, integrating properties like stiffness and strength with observation at below macroscopic scale. Advances in multiscale modelling and analysis pertain directly to materials which either have a range of relevant microstructural scales, like metals, or do not have a well-defined microstructure, like cementitious or ceramic composites.
Download or read book Composite Materials for Aircraft Structures written by Alan A. Baker and published by AIAA. This book was released on 2004 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Composite Materials written by R. Talreja and published by CRC Press. This book was released on 1987 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue in Composites provides extensive contemporary research on fatigue from internationally recognized researchers. Part I introduces the concept, delivering a historical review of the fatigue behavior of fibre-reinforced plastics and illustrating fatigue test methods and fatigue under multiaxial stress systems. Part II reviews current research on micromechanical aspects, emphasizing long-term behavior, interface performance, delamination and damage accumulation. Part III covers the analysis and testing of fatigue behavior. Part IV details physical , micromechanical, computational, statistical, and life-prediction models for constant and variable stress. The final sections offer an overview of the wide range of composite fatigue-related problems experienced by engineers.
Download or read book Damage Tolerance in Advanced Composites written by Robert L. Sierakowski and published by Routledge. This book was released on 2018-12-13 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recent book provides a detailed presentation of damage tolerance assessment and characterization methods for advanced composites, as well as an examination of the role of damage tolerance in the design of composites. Included are analytical models for different types of damage in different composite materials. Tables provide helpful reference
Download or read book Energy and Sustainable Futures written by Iosif Mporas and published by Springer Nature. This book was released on 2021-04-29 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents papers displayed in the 2nd International Conference on Energy and Sustainable Futures (ICESF 2020), co-organised by the University of Hertfordshire and the University Alliance DTA in Energy. The research included in this book covers a wide range of topics in the areas of energy and sustainability including: • ICT and control of energy;• conventional energy sources;• energy governance;• materials in energy research;• renewable energy; and• energy storage. The book offers a holistic view of topics related to energy and sustainability, making it of interest to experts in the field, from industry and academia.
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers
Download or read book Composite Materials written by It Meng Low and published by Elsevier. This book was released on 2021-06-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been well developed to meet the challenges of high-performing material properties targeting engineering and structural applications. The ability of composite materials to absorb stresses and dissipate strain energy is vastly superior to that of other materials such as polymers and ceramics, and thus they offer engineers many mechanical, thermal, chemical and damage-tolerance advantages with limited drawbacks such as brittleness. Composite Materials: Manufacturing, Properties and Applications presents a comprehensive review of current status and future directions, latest technologies and innovative work, challenges and opportunities for composite materials. The chapters present latest advances and comprehensive coverage of material types, design, fabrication, modelling, properties and applications from conventional composite materials to advanced composites such as nanocomposites, self-healing and smart composites. The book targets researchers in the field of advanced composite materials and ceramics, students of materials science and engineering at the postgraduate level, as well as material engineers and scientists working in industrial R& D sectors for composite material manufacturing. - Comprehensive coverage of material types, design, fabrication, modelling, properties and applications from conventional composite materials to advanced composites such as nanocomposites, self-healing and smart composites - Features latest advances in terms of mechanical properties and other material parameters which are essential for designers and engineers in the composite and composite reinforcement manufacturing industry, as well as all those with an academic research interest in the subject - Offers a good platform for end users to refer to the latest technologies and topics fitting into specific applications and specific methods to tackle manufacturing or material processing issues in relation to different types of composite materials
