Download or read book Cyclic Plasticity of Metals written by Hamid Jahed and published by Elsevier. This book was released on 2021-11-11 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component’s performance under loading Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions

Download or read book Cyclic Plasticity of Metals written by Ole Bøcker Pedersen and published by . This book was released on 1991 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cyclic Plasticity of Engineering Materials written by Guozheng Kang and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.

Download or read book Cyclic Plasticity of Engineering Materials written by Guozheng Kang and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.

Download or read book Cyclic Plasticity and Low Cycle Fatigue Life of Metals written by Jaroslav Polák and published by Elsevier Publishing Company. This book was released on 1991 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Low cycle fatigue failures have been identified as being connected with the low number of repeated working cycles of equipment which usually results from start-up, shut-down operations, or some necessary interruption of ordinary use. The vast amount of research carried out so far has shown that only detailed knowledge of the proper mechanisms, and thus recognition of the important parameters governing the fatigue failure, can effectively improve engineering design procedures. This book concentrates on the physical metallurgy approach to elastoplastic cyclic straining and its relation to the fatigue life of metals. Recent breakthroughs in the understanding of the appropriate mechanisms is summarized and the importance of short crack growth is emphasised. Special attention is given to the identification of the basic mechanisms underlying cyclic plastic straining, damage evolution, fatigue crack initiation and growth, which results in final frac

Download or read book The Mechanics of Constitutive Modeling written by Niels Saabye Ottosen and published by Elsevier. This book was released on 2005-09-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive modelling is the mathematical description of how materials respond to various loadings. This is the most intensely researched field within solid mechanics because of its complexity and the importance of accurate constitutive models for practical engineering problems. Topics covered include: Elasticity - Plasticity theory - Creep theory - The nonlinear finite element method - Solution of nonlinear equilibrium equations - Integration of elastoplastic constitutive equations - The thermodynamic framework for constitutive modelling – Thermoplasticity - Uniqueness and discontinuous bifurcations • More comprehensive in scope than competitive titles, with detailed discussion of thermodynamics and numerical methods. • Offers appropriate strategies for numerical solution, illustrated by discussion of specific models. • Demonstrates each topic in a complete and self-contained framework, with extensive referencing.

Download or read book Plasticity and Creep of Metals written by Andrew Rusinko and published by Springer Science & Business Media. This book was released on 2011-07-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.

Download or read book Internal Friction Damping and Cyclic Plasticity written by B. J Lazan and published by ASTM International. This book was released on 1965 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plasticity of Metals Experiments Models Computation written by Elmar Steck and published by Wiley-VCH. This book was released on 2001 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report, drawing its conclusions and results from many individual papers and co-workers at the Institute for Structural Analysis of the Technical University of Braunschweig. It shows the correlation between energetic and mechanical quantities of face-centred cubic metals, cold worked and softened to different states. Constitutive models for the plastic of metals are developed and the application of these models is presented. The improvements achieved by this contribution cover the material functions, the shape of yield surfaces, and the consideration of distributed experimental data within the mumerical analysis.

Download or read book Foundations of Elastoplasticity Subloading Surface Model written by Koichi Hashiguchi and published by Springer Nature. This book was released on 2023-06-12 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the standard text book for elastoplasticity/viscoplasticity which is explained comprehensively covering the rate-independent to -dependent finite deformations of metals, soils, polymers, crystal plasticity, etc. and the friction phenomenon. Concise explanations on vector-tensor analysis and continuum mechanics are provided first, covering the underlying physical concepts, e.g. various time-derivatives, pull-back and push-forward operations, work-conjugacy and multiplicative decomposition of deformation gradient tensor. Then, the rigorous elastoplastic/viscoplastic model, called the subloading surface model, is explained comprehensively, which is based on the subloading surface concept to describe the continuous development of the plastic/viscoplastic strain rate as the stress approaches to the yield surface, while it can never be described by the other plasticity models, e.g. the Chaboche-Ohno and the Dafalias-Yoshida models assuming the purely-elastic domain. The main features of the subloading surface model are as follows: 1) The subloading surface concept underling the cyclic plasticity is introduced, which insists that the plastic deformation develops as the stress approaches the yield surface. Thus, the smooth elastic-plastic transition leading to the continuous variation of the tangent stiffness modulus is described always. 2) The subloading-overstress model is formulated by which the elastoplastic deformation during the quasi-static loading and the viscoplastic deformation during the dynamic and impact loading can be described by the unified equation. Then, only this model can be used to describe the deformation in the general rate of deformation, disusing the elastoplastic constitutive equation. 3) The hyperelastic-based (visco)plasticity based on the multiplicative decomposition of deformation gradient tensor and the subloading surface model is formulated for the exact descriptions of the finite elastic and (visco)plastic deformations. 4) The subloading-friction model is formulated for the exact description of the dry and the fluid (lubricated) frictions at the general rate of sliding from the static to the impact sliding. Thus, all the elastic and inelastic deformation/sliding phenomena of solids can be described accurately in the unified equation by the subloading-overstress model. The subloading surface model will be engraved as the governing law of irreversible deformation of solids in the history of solid mechanics.

Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.

Download or read book Metal Plasticity and Fatigue at High Temperature written by Denis Benasciutti and published by MDPI. This book was released on 2020-05-20 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.

Download or read book Theory of Plasticity written by Jagabanduhu Chakrabarty and published by Elsevier. This book was released on 2012-12-02 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject Updates with new material on computational analysis and applications, new end of chapter exercises Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.

Download or read book Cyclic Deformation and Fatigue of Metals written by Matěj Bílý and published by . This book was released on 1993 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integral review is given in this book on the fatigue phenomenon covering the fundamentals of fatigue damage initiation, relevant factors influencing fatigue crack propagation and fatigue life, random load analysis, and simulation for theoretical and experimental fatigue life assessment. The entire chain of problems related to fatigue of metals and structural components is covered. Specifically, it describes the low-cycle plastic properties and statistically interprets the material stress reaction, examining original results of investigations on inelastic deformations under high cycle cyclic loading and correlating them with a number of use parameters. The limit states of bodies with primary defects and their resistance to fatigue crack propagation are discussed. Measurements, analysis and real-time modelling of operating loads for experimental fatigue life verification are reviewed as well as introducing some new fatigue damage accumulation hypotheses based on dissipated energy.

Download or read book Ultra low Cycle Fatigue Failure of Metal Structures under Strong Earthquakes written by Liang-Jiu Jia and published by Springer. This book was released on 2018-11-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental results and theoretical advances in the field of ultra-low-cycle fatigue failure of metal structures under strong earthquakes, where the dominant failure mechanism is ductile fracture. Studies on ultra-low-cycle fatigue failure of metal materials and structures have caught the interest of engineers and researchers from various disciplines, such as material, civil and mechanical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while also highlighting the importance of theoretical analysis and experimental results in the fracture evaluation of metal structures under seismic loading. Accordingly, it offers a valuable resource for undergraduate and graduate students interested in ultra-low-cycle fatigue, researchers investigating steel and aluminum structures, and structural engineers working on applications related to cyclic large plastic loading conditions.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by Wiley-VCH. This book was released on 2010-11-22 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Inelastic Deformation of Metals written by Donald C. Stouffer and published by John Wiley & Sons. This book was released on 1996-01-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a totally new approach, this groundbreaking book establishesthe logical connections between metallurgy, materials modeling, andnumerical applications. In recognition of the fact that classicalmethods are inadequate when time effects are present, or whencertain types of multiaxial loads are applied, the new, physicallybased state variable method has evolved to meet these needs.Inelastic Deformation of Metals is the first comprehensivepresentation of this new technology in book form. It developsphysically based, numerically efficient, and accurate methods forpredicting the inelastic response of metals under a variety ofloading and environmental conditions. More specifically, Inelastic Deformation of Metals: * Demonstrates how to use the metallurgical information to developmaterial models for structural simulations and low cyclic fatiguepredictions. It presents the key features of classical and statevariable modeling, describes the different types of models andtheir attributes, and provides methods for developing models forspecial situations. This book's innovative approach covers such newtopics as multiaxial loading, thermomechanical loading, and singlecrystal superalloys. * Provides comparisons between data and theory to help the readermake meaningful judgments about the value and accuracy of aparticular model and to instill an understanding of how metalsrespond in real service environments. * Analyzes the numerical methods associated with nonlinearconstitutive modeling, including time independent, time dependentnumerical procedures, time integration schemes, inversiontechniques, and sub-incrementing. Inelastic Deformation of Metals is designed to give theprofessional engineer and advanced student new and expandedknowledge of metals and modeling that will lead to more accuratejudgments and more efficient designs. In contrast to existing plasticity books, which discuss few if anycorrelations between data and models, this breakthrough volumeshows engineers and advanced students how materials and modelsactually do behave in real service environments. As greater demandsare placed on technology, the need for more meaningful judgmentsand more efficient designs increases dramatically. Incorporatingthe state variable approach, Inelastic Deformation of Metals: * Provides an overview of a wide variety of metal responsecharacteristics for rate dependent and rate independent loadingconditions * Shows the correlations between the mechanical response propertiesand the deformation mechanisms, and describes how to use thisinformation in constitutive modeling * Presents different modeling options and discusses the usefulnessand limitations of each modeling approach, with material parametersfor each model * Offers numerous examples of material response and correlationwith model predictions for many alloys * Shows how to implement nonlinear material models in stand-aloneconstitutive model codes and finite element codes An innovative, comprehensive, and essential book, InelasticDeformation of Metals will help practicing engineers and advancedstudents in mechanical, aerospace, civil, and metallurgicalengineering increase their professional skills in the moderntechnological environment.