Download or read book Current Trends in Boriding written by Michal Kulka and published by . This book was released on 2019 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important thermochemical and physical techniques of boriding. The formation and characterization of different boride layers or boride coatings are compared in this book. The author analyzes the technological aspects of boriding processes, presenting the advantages and disadvantages of each method. The effect of the boriding techniques on the microstructure of borided materials are also indicated. The mechanism of formation of active boron atoms or ions and the phenomena during re-melting of alloying material together with the substrate are described. Special attention is devoted to powder-pack boriding, electrochemical boriding in borax, gas boriding, plasma gas or paste boriding and laser or plasma surface alloying with boron, acknowledged as the most important current methods in boriding. The thermodynamics of gas boriding is also analyzed.
Download or read book Current Trends in Boriding written by Michal Kulka and published by Springer. This book was released on 2018-12-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important thermochemical and physical techniques of boriding. The formation and characterization of different boride layers or boride coatings are compared in this book. The author analyzes the technological aspects of boriding processes, presenting the advantages and disadvantages of each method. The effect of the boriding techniques on the microstructure of borided materials are also indicated. The mechanism of formation of active boron atoms or ions and the phenomena during re-melting of alloying material together with the substrate are described. Special attention is devoted to powder-pack boriding, electrochemical boriding in borax, gas boriding, plasma gas or paste boriding and laser or plasma surface alloying with boron, acknowledged as the most important current methods in boriding. The thermodynamics of gas boriding is also analyzed.
Download or read book Carburising and Nitriding of Iron Alloys written by Emilia Wołowiec-Korecka and published by Springer Nature. This book was released on with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.
Download or read book Plasticity of Boronized Layers written by M. G. Krukovich and published by Springer. This book was released on 2016-08-25 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physico-technical basis and current state of the technology of boronized layers. Special attention is given to the layer structure and morphology of allocated phases and distributions in a superficial zone of chemical compounds. Two- and multi-component phases of alloys and diffusion processes in a self-organizing mode are discussed. Surface hardening by boronizing increases the life time of mechanical tools. This is important for the mining industry, agriculture, textile and chemical industry. The book is important for thermochemical treatment and surface hardening of metals and alloys.
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.
Download or read book Transactions of the Institution of Engineers Australia written by and published by . This book was released on 1987 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's shortages of resources make the search for wear and corrosion resistant materials one of the most important tasks of the next century. Since the surface of a material is the location where any interaction occurs, it is that there the hardest requirements on the material are imposed: to be wear resistant for tools and bearings; to be corrosion resistant for turbine blades and tubes in the petrochemical industry; to be antireflecting for solar cells; to be decorative for architectural panels and to combine several of these properties in other applications. Surface engineering is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both coating and modification of the surface by ion implantation and laser beam melting. In recent years a continuously growing number of these techniques were developed to the extent that it became more and more difficult to maintain an overlook and to understand which of these highly differentiated techniques might be applied to resolve a given surface engineering problem. A similar development is also occuring for surface characterization techniques. This volume contains contributions from renowned scientists and engineers to the Eurocourse the aim of which was to inform about the various techniques and to give a comprehensive survey of the latest development on this subject.
Download or read book The Tribology Handbook written by Michael J Neale and published by Elsevier. This book was released on 1995-12-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The renowned reference work is a practical guide to the selection and design of the components of machines and to their lubrication. It has been completely revised for this second edition by leading experts in the area.
Download or read book Industrial Tribology written by Theo Mang and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating very interesting results from the most important R & D project ever made in Germany, this book offers a basic understanding of tribological systems and the latest developments in reduction of wear and energy consumption by tribological measures. This ready reference and handbook provides an analysis of the most important tribosystems using modern test equipment in laboratories and test fields, the latest results in material selection and wear protection by special coatings and surface engineering, as well as with lubrication and lubricants. This result is a quick introduction for mechanical engineers and laboratory technicians who have to monitor and evaluate lubricants, as well as for plant maintenance personnel, engineers and chemists in the automotive and transportation industries and in all fields of mechanical manufacturing industries, researchers in the field of mechanical engineering, chemistry and material sciences.
Download or read book Nanorobotics written by Constantinos Mavroidis and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanorobots can be defined as intelligent systems with overall dimensions at or below the micrometer range that are made of assemblies of nanoscale components with individual dimensions ranging between 1 to 100 nm. These devices can now perform a wide variety of tasks at the nanoscale in a wide variety of fields including but not limited to fields such as manufacturing, medicine, supply chain, biology, and aerospace. Nanorobotics: Current Approaches and Techniques offers a comprehensive overview of this emerging interdisciplinary field with a wide ranging discussion that includes nano-manipulation and industrial nanorobotics, nanorobotic manipulation in biology and medicine, nanorobotic sensing, navigation and swarm behavior and CNT, and protein and DNA-based nanorobotics.
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Surface Modification of Metals and Alloys written by Oriol Rius-Ayra and published by MDPI. This book was released on 2021-08-31 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past four decades, there has been increased attention given to the research of fluid mechanics due to its wide application in industry and phycology. Major advances in the modeling of key topics such Newtonian and non-Newtonian fluids and thin film flows have been made and finally published in the Special Issue of coatings. This is an attempt to edit the Special Issue into a book. Although this book is not a formal textbook, it will definitely be useful for university teachers, research students, industrial researchers and in overcoming the difficulties occurring in the said topic, while dealing with the nonlinear governing equations. For such types of equations, it is often more difficult to find an analytical solution or even a numerical one. This book has successfully handled this challenging job with the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards
