Download or read book Current Mathematical Problems of Mechanics and Their Applications written by А. А Бармин and published by American Mathematical Soc.. This book was released on 1991 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected reports delivered at the international conference on "Modern mathematical problems of mechanics and their applications", which took place in Moscow in 1987 on the occasion of the 80th birthday of Academician L. I. Sedov. The papers are devoted to a wide range of problems of modern mechanics, including general relativity and gravitation, construction and investigation of models of continuum mechanics, gas dynamics (with due regard to physical and chemical processes), hydromechanics, hydrodynamic stability and turbulence, magnetohydrodynamics, electrodynamics, and nonlinear problems of mechanics of deformable solid body. Containing results buy well-known specialists, this book is of interest to specialists in mechanics and mathematics.
Download or read book Trends in Applications of Mathematics to Mechanics written by Jose Francisco Rodrigues and published by CRC Press. This book was released on 1995-10-03 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the purpose of promoting cooperative research involving the fields of mechanics and pure mathematics, the International Society for the Interaction of Mechanics and Mathematics (ISIMM) sponsors a series of Symposia. The ninth in this series (STAMM 94) took place in July 1994 at the University of Lisbon and emphasized the current trends in nonlinear mechanics, phase change problems (in cooperation with the European Science Foundation Scientific Programme on Mathematical Treatment of Free Boundary Problems), non Newtonian fluids, optimization in solid mechanics and numerical methods in continuum mechanics. This book collects a refereed selection of original contributions presented at STAMM 94, covering a large spectrum of current research in the above topics, from nonlinear elasticity to nonlinear fluids, from phase transitions to diffusion phenomena, and from structural optimization and homogenization to numerical schemes.
Download or read book Trends in Applications of Mathematics to Mechanics written by Gerard Iooss and published by CRC Press. This book was released on 1999-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Society for the Interaction of Mechanics and Mathematics has a long-standing and respected tradition of hosting symposia that provide a forum for disseminating new developments and methods. Trends in Applications of Mathematics to Mechanics represents the proceedings of the eleventh such symposium, held at the University of Nice in May 1998. Comprising invited lectures and refereed papers, this volume includes recent results that open perspectives on fields in mechanics and their methodological counterparts in mathematics. It also surveys important advances in the areas where mathematics and mechanics interact. The applications addressed include:
Download or read book Ordinary Differential Equations with Applications to Mechanics written by Mircea Soare and published by Springer Science & Business Media. This book was released on 2007-06-04 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary work creates a bridge between the mathematical and the technical disciplines by providing a strong mathematical tool. The present book is a new, English edition of the volume published in 1999. It contains many improvements, as well as new topics, using enlarged and updated references. Only ordinary differential equations and their solutions in an analytical frame were considered, leaving aside their numerical approach.
Download or read book Ordinary Differential Equations with Applications to Mechanics written by Mircea Soare and published by Springer. This book was released on 2009-09-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary work creates a bridge between the mathematical and the technical disciplines by providing a strong mathematical tool. The present book is a new, English edition of the volume published in 1999. It contains many improvements, as well as new topics, using enlarged and updated references. Only ordinary differential equations and their solutions in an analytical frame were considered, leaving aside their numerical approach.
Download or read book Mathematical Analysis of Continuum Mechanics and Industrial Applications III written by Hiromichi Itou and published by Springer Nature. This book was released on 2020-08-29 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on mathematical theory and numerical simulation related to various areas of continuum mechanics, such as fracture mechanics, (visco)elasticity, optimal shape design, modelling of earthquakes and Tsunami waves, material structure, interface dynamics and complex systems. Written by leading researchers from the fields of applied mathematics, physics, seismology, engineering, and industry with an extensive knowledge of mathematical analysis, it helps readers understand how mathematical theory can be applied to various phenomena, and conversely, how to formulate actual phenomena as mathematical problems. This book is the sequel to the proceedings of the International Conference of Continuum Mechanics Focusing on Singularities (CoMFoS) 15 and CoMFoS16.
Download or read book Physics for Mathematicians written by Michael Spivak and published by . This book was released on 2010 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Applications of Mathematics to Mechanics written by Elisabetta Rocca and published by Springer. This book was released on 2018-04-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from the INDAM Symposium on Trends on Applications of Mathematics to Mechanics (STAMM), which was held at the INDAM headquarters in Rome on 5–9 September 2016. It brings together original contributions at the interface of Mathematics and Mechanics. The focus is on mathematical models of phenomena issued from various applications. These include thermomechanics of solids and gases, nematic shells, thin films, dry friction, delamination, damage, and phase-field dynamics. The papers in the volume present novel results and identify possible future developments. The book is addressed to researchers involved in Mathematics and its applications to Mechanics.
Download or read book Navier Stokes Equations written by Grzegorz Łukaszewicz and published by Springer. This book was released on 2016-04-12 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the study of the Navier–Stokes equations, providing a comprehensive reference for a range of applications: from advanced undergraduate students to engineers and professional mathematicians involved in research on fluid mechanics, dynamical systems, and mathematical modeling. Equipped with only a basic knowledge of calculus, functional analysis, and partial differential equations, the reader is introduced to the concept and applications of the Navier–Stokes equations through a series of fully self-contained chapters. Including lively illustrations that complement and elucidate the text, and a collection of exercises at the end of each chapter, this book is an indispensable, accessible, classroom-tested tool for teaching and understanding the Navier–Stokes equations. Incompressible Navier–Stokes equations describe the dynamic motion (flow) of incompressible fluid, the unknowns being the velocity and pressure as functions of location (space) and time variables. A solution to these equations predicts the behavior of the fluid, assuming knowledge of its initial and boundary states. These equations are one of the most important models of mathematical physics: although they have been a subject of vivid research for more than 150 years, there are still many open problems due to the nature of nonlinearity present in the equations. The nonlinear convective term present in the equations leads to phenomena such as eddy flows and turbulence. In particular, the question of solution regularity for three-dimensional problem was appointed by Clay Institute as one of the Millennium Problems, the key problems in modern mathematics. The problem remains challenging and fascinating for mathematicians, and the applications of the Navier–Stokes equations range from aerodynamics (drag and lift forces), to the design of watercraft and hydroelectric power plants, to medical applications such as modeling the flow of blood in the circulatory system.
Download or read book Energy Methods for Free Boundary Problems written by S.N. Antontsev and published by Springer Science & Business Media. This book was released on 2001-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the past several decades, the study of free boundary problems has been a very active subject of research occurring in a variety of applied sciences. What these problems have in common is their formulation in terms of suitably posed initial and boundary value problems for nonlinear partial differential equations. Such problems arise, for example, in the mathematical treatment of the processes of heat conduction, filtration through porous media, flows of non-Newtonian fluids, boundary layers, chemical reactions, semiconductors, and so on. The growing interest in these problems is reflected by the series of meetings held under the title "Free Boundary Problems: Theory and Applications" (Ox ford 1974, Pavia 1979, Durham 1978, Montecatini 1981, Maubuisson 1984, Irsee 1987, Montreal 1990, Toledo 1993, Zakopane 1995, Crete 1997, Chiba 1999). From the proceedings of these meetings, we can learn about the different kinds of mathematical areas that fall within the scope of free boundary problems. It is worth mentioning that the European Science Foundation supported a vast research project on free boundary problems from 1993 until 1999. The recent creation of the specialized journal Interfaces and Free Boundaries: Modeling, Analysis and Computation gives us an idea of the vitality of the subject and its present state of development. This book is a result of collaboration among the authors over the last 15 years.
Download or read book Singular Perturbation Theory written by R.S. Johnson and published by Springer Science & Business Media. This book was released on 2005-12-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of mathematics in the study of problems arising from the real world, and the increasing success with which it has been used to model situations ranging from the purely deterministic to the stochastic, is well established. The purpose of the set of volumes to which the present one belongs is to make available authoritative, up to date, and self-contained accounts of some of the most important and useful of these analytical approaches and techniques. Each volume provides a detailed introduction to a specific subject area of current importance that is summarized below, and then goes beyond this by reviewing recent contributions, and so serving as a valuable reference source. The progress in applicable mathematics has been brought about by the extension and development of many important analytical approaches and techniques, in areas both old and new, frequently aided by the use of computers without which the solution of realistic problems would otherwise have been impossible.
Download or read book Free Boundary Problems written by Ioannis Athanasopoulos and published by CRC Press. This book was released on 1999-06-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free boundary problems arise in an enormous number of situations in nature and technology. They hold a strategic position in pure and applied sciences and thus have been the focus of considerable research over the last three decades. Free Boundary Problems: Theory and Applications presents the work and results of experts at the forefront of current research in mathematics, material sciences, chemical engineering, biology, and physics. It contains the plenary lectures and contributed papers of the 1997 International Interdisciplinary Congress proceedings held in Crete. The main topics addressed include free boundary problems in fluid and solid mechanics, combustion, the theory of filtration, and glaciology. Contributors also discuss material science modeling, recent mathematical developments, and numerical analysis advances within their presentations of more specific topics, such as singularities of interfaces, cusp cavitation and fracture, capillary fluid dynamics of film coating, dynamics of surface growth, phase transition kinetics, and phase field models. With the implications of free boundary problems so far reaching, it becomes important for researchers from all of these fields to stay abreast of new developments. Free Boundary Problems: Theory and Applications provides the opportunity to do just that, presenting recent advances from more than 50 researchers at the frontiers of science, mathematics, and technology.
Download or read book Mathematical Analysis of Physical Problems written by Philip Russell Wallace and published by Courier Corporation. This book was released on 1984-01-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This mathematical reference for theoretical physics employs common techniques and concepts to link classical and modern physics. It provides the necessary mathematics to solve most of the problems. Topics include the vibrating string, linear vector spaces, the potential equation, problems of diffusion and attenuation, probability and stochastic processes, and much more. 1972 edition.
Download or read book Quantum Mechanics Genesis and Achievements written by Alexander Komech and published by Springer Science & Business Media. This book was released on 2012-10-24 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the present work is nonrelativistic and relativistic quantum mechanics with standard applications to the hydrogen atom. The author has aimed at presenting quantum mechanics in a comprehensive yet accessible for mathematicians and other non-physicists. The genesis of quantum mechanics, its applications to basic quantum phenomena, and detailed explanations of the corresponding mathematical methods are presented. The exposition is formalized (whenever possible) on the basis of the coupled Schroedinger, Dirac and Maxwell equations. Aimed at upper graduate and graduate students in mathematical and physical science studies.
Download or read book What s Happening in the Mathematical Sciences written by Barry Cipra and published by American Mathematical Soc.. This book was released on with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematicians like to point out that mathematics is universal. In spite of this, most people continue to view it as either mundane (balancing a checkbook) or mysterious (cryptography). This fifth volume of the What's Happening series contradicts that view by showing that mathematics is indeed found everywhere-in science, art, history, and our everyday lives. Here is some of what you'll find in this volume: Mathematics and Science Mathematical biology: Mathematics was key tocracking the genetic code. Now, new mathematics is needed to understand the three-dimensional structure of the proteins produced from that code. Celestial mechanics and cosmology: New methods have revealed a multitude of solutions to the three-body problem. And other new work may answer one of cosmology'smost fundamental questions: What is the size and shape of the universe? Mathematics and Everyday Life Traffic jams: New models are helping researchers understand where traffic jams come from-and maybe what to do about them! Small worlds: Researchers have found a short distance from theory to applications in the study of small world networks. Elegance in Mathematics Beyond Fermat's Last Theorem: Number theorists are reaching higher ground after Wiles' astounding 1994 proof: new developments inthe elegant world of elliptic curves and modular functions. The Millennium Prize Problems: The Clay Mathematics Institute has offered a million dollars for solutions to seven important and difficult unsolved problems. These are just some of the topics of current interest that are covered in thislatest volume of What's Happening in the Mathematical Sciences. The book has broad appeal for a wide spectrum of mathematicians and scientists, from high school students through advanced-level graduates and researchers.
Download or read book Mathematical Methods in Engineering written by Nuno Miguel Fonseca Ferreira and published by Springer. This book was released on 2014-08-18 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a careful selection of the contributions presented at the Mathematical Methods in Engineering (MME10) International Symposium, held at the Polytechnic Institute of Coimbra- Engineering Institute of Coimbra (IPC/ISEC), Portugal, October 21-24, 2010. The volume discusses recent developments about theoretical and applied mathematics toward the solution of engineering problems, thus covering a wide range of topics, such as: Automatic Control, Autonomous Systems, Computer Science, Dynamical Systems and Control, Electronics, Finance and Economics, Fluid Mechanics and Heat Transfer, Fractional Mathematics, Fractional Transforms and Their Applications, Fuzzy Sets and Systems, Image and Signal Analysis, Image Processing, Mechanics, Mechatronics, Motor Control and Human Movement Analysis, Nonlinear Dynamics, Partial Differential Equations, Robotics, Acoustics, Vibration and Control, and Wavelets.
Download or read book Bounded Noises in Physics Biology and Engineering written by Alberto d'Onofrio and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the parameters in dynamical systems of biological interest are inherently positive and bounded, bounded noises are a natural way to model the realistic stochastic fluctuations of a biological system that are caused by its interaction with the external world. Bounded Noises in Physics, Biology, and Engineering is the first contributed volume devoted to the modeling of bounded noises in theoretical and applied statistical mechanics, quantitative biology, and mathematical physics. It gives an overview of the current state-of-the-art and is intended to stimulate further research. The volume is organized in four parts. The first part presents the main kinds of bounded noises and their applications in theoretical physics. The theory of bounded stochastic processes is intimately linked to its applications to mathematical and statistical physics, and it would be difficult and unnatural to separate the theory from its physical applications. The second is devoted to framing bounded noises in the theory of random dynamical systems and random bifurcations, while the third is devoted to applications of bounded stochastic processes in biology, one of the major areas of potential applications of this subject. The final part concerns the application of bounded stochastic processes in mechanical and structural engineering, the area where the renewed interest for non-Gaussian bounded noises started. Pure mathematicians working on stochastic calculus will find here a rich source of problems that are challenging from the point of view of contemporary nonlinear analysis. Bounded Noises in Physics, Biology, and Engineering is intended for scientists working on stochastic processes with an interest in both fundamental issues and applications. It will appeal to a broad range of applied mathematicians, mathematical biologists, physicists, engineers, and researchers in other fields interested in complexity theory. It is accessible to anyone with a working knowledge of stochastic modeling, from advanced undergraduates to senior researchers.
