Download or read book Current and Future Trends in the Manufacturing Technology written by University of Hanover, FRG. Institute of Production Engineering and Machine Tools (IFW) and published by . This book was released on 1994 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industry 4 0 written by Jesús Hamilton Ortiz and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows a vision of the present and future of Industry 4.0 and identifies and examines the most pressing research issue in Industry 4.0. Containing the contributions of leading researchers and academics, this book includes recent publications in key areas of interest, for example: a review on the Industry 4.0: What is the Industry 4.0, the pillars of Industry 4.0, current and future trends, technologies, taxonomy, and some case studies (A.U.T.O 4.0, stabilization of digitized process). This book also provides an essential tool in the process of migration to Industry 4.0. The book is suitable as a text for graduate students and professionals in the industrial sector and general engineering areas. The book is organized into two sections: 1. Reviews 2. Case Studies Industry 4.0 is likely to play an important role in the future society. This book is a good reference on Industry 4.0 and includes some case studies. Each chapter is written by expert researchers in the sector, and the topics are broad; from the concept or definition of Industry 4.0 to a future society 5.0.
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies written by Craig Leadley and published by Woodhead Publishing. This book was released on 2015-11-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies focuses on emerging and future trends in food manufacturing and supply chain technologies, examining the drivers of change and innovation in the food industry and the current and future ways of addressing issues such as energy reduction and rising costs in food manufacture. Part One looks at innovation in the food supply chain, while Part Two covers emerging technologies in food processing and packaging. Subsequent sections explore innovative food preservation technologies in themed chapters and sustainability and future research needs in food manufacturing. Addresses issues such as energy reduction and rising costs in food manufacture Assesses current supply chain technologies and the emerging advancements in the field, including key chapters on food processing technologies Covers the complete food manufacturing scale, compiling significant research from academics and important industrial figures
Download or read book Current and Future Trends on Manufacturing Management and Technology in the UK written by Institute of Production Engineers (Great Britain) and published by . This book was released on 1980 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Business Trends in Practice written by Bernard Marr and published by John Wiley & Sons. This book was released on 2021-11-15 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: WINNER OF THE BUSINESS BOOK OF THE YEAR AWARD 2022! Stay one step ahead of the competition with this expert review of the most impactful and disruptive business trends coming down the pike Far from slowing down, change and transformation in business seems to come only at a more and more furious rate. The last ten years alone have seen the introduction of groundbreaking new trends that pose new opportunities and challenges for leaders in all industries. In Business Trends in Practice: The 25+ Trends That Are Redefining Organizations, best-selling business author and strategist Bernard Marr breaks down the social and technological forces underlying these rapidly advancing changes and the impact of those changes on key industries. Critical consumer trends just emerging today—or poised to emerge tomorrow—are discussed, as are strategies for rethinking your organisation’s product and service delivery. The book also explores: Crucial business operations trends that are changing the way companies conduct themselves in the 21st century The practical insights and takeaways you can glean from technological and social innovation when you cut through the hype Disruptive new technologies, including AI, robotic and business process automation, remote work, as well as social and environmental sustainability trends Business Trends in Practice: The 25+ Trends That Are Redefining Organizations is a must-read resource for executives, business leaders and managers, and business development and innovation leads trying to get – and stay – on top of changes and disruptions that are right around the corner.
Download or read book From Current to Future Trends in Pharmaceutical Technology written by Natassa Pippa and published by Elsevier. This book was released on 2023-12-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Current to Future Trends in Pharmaceutical Technology explores the current trends of this field and creates a multi-aspect framework for the reader. The book covers topics on pharmaceutics, pharmaceutical engineering, pre-formulation protocols, techniques, innovative excipients, bio-printing techniques, scale-up based on formulas on-a-chip, and regulatory aspects based on new scientific achievements. Modified dosage forms, new aspects on the compatibility of drug excipients interactions, and drug release by various dosage forms are included. Physical pharmacy (physical and biological stability of dosage forms), innovative excipients, patents on innovative formulations and regulatory issues related to the approval process of medicines are also discussed. The book is a valuable resource for a wide audience of academics, industrial researchers and professionals working in this field as the development of efficient and safe medicines is critical to future needs. Includes innovative excipients/advanced materials in pharmaceutics Covers modified release delivery platforms Explores new elements of drug development
Download or read book Report by the Technical Policy Board on Current and Future Trends on Manufacturing Management and Technology in the UK written by Institution of Production Engineers (Great Britain) and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Trends in Medical Plastic Engineering and Manufacturing written by Markus Schönberger and published by William Andrew. This book was released on 2016-01-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Trends in Medical Plastic Engineering and Manufacturing gives engineers and materials scientists working in the field detailed insights into upcoming technologies in medical polymers. While plastic manufacturing combines the possibility of mass production and wide design variability, there are still opportunities within the plastic engineering field which have not been fully adopted in the medical industry. In addition, there are numerous additional challenges related to the development of products for this industry, such as ensuring tolerance to disinfection, biocompatibility, selecting compliant additives for processing, and more. This book enables product designers, polymer processing engineers, and manufacturing engineers to take advantage of the numerous upcoming developments in medical plastics, such as autoregulated volume-correction to achieve zero defect production or the development of ‘intelligent’ single use plastic products, and methods for sterile manufacturing which reduce the need for subsequent sterilization processes. Finally, as medical devices get smaller, the book discusses the challenges posed by miniaturization for injection molders, how to respond to these challenges, and the rapidly advancing prototyping technologies. Provides a roadmap to the emerging technologies for polymers in the medical device industry, including coverage of ‘intelligent’ single use products, personalized medical devices, and the integration of manufacturing steps to improve workflows Helps engineers in the biomedical and medical devices industries to navigate and anticipate the special requirements of this field with relation to biocompatibility, sterilization methods, and government regulations Presents tactics readers can use to take advantage of rapid prototyping technologies, such as 3D printing, to reduce defects in production and develop products that enable entirely new treatment possibilities
Download or read book New Directions in Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2004-05-28 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processes and techniques of manufacturing have changed substantially over the decades and that evolution continues today. In order to examine the potential impacts of these changes, the Department of Commerce asked the NRC to design a workshop to focus on issues central to the changing nature of manufacturing. The workshop brought together a number of experts to present papers about and to discuss the current state of manufacturing in the United States and the challenges it faces. This report presents the results of that workshop. Key challenges that emerged from the workshop and that are discussed include understanding manufacturing trends; manufacturing globalization; information technology opportunities; maintaining innovation; strengthening small and medium-sized enterprises; workforce education; and rising infrastructure costs.
Download or read book Fundamentals of Digital Manufacturing Science written by Zude Zhou and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry will reap significant benefits from encouraging the development of digital manufacturing science and technology. Digital Manufacturing Science uses theorems, illustrations and tables to introduce the definition, theory architecture, main content, and key technologies of digital manufacturing science. Readers will be able to develop an in-depth understanding of the emergence and the development, the theoretical background, and the techniques and methods of digital manufacturing science. Furthermore, they will also be able to use the basic theories and key technologies described in Digital Manufacturing Science to solve practical engineering problems in modern manufacturing processes. Digital Manufacturing Science is aimed at advanced undergraduate and postgraduate students, academic researchers and researchers in the manufacturing industry. It allows readers to integrate the theories and technologies described with their own research works, and to propose new ideas and new methods to improve the theory and application of digital manufacturing science.
Download or read book Virtual Manufacturing Its Current Applications and Future Promise for American Industry written by United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee on Manufacturing and Competitiveness and published by . This book was released on 1999 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Work of the Future written by David H. Autor and published by MIT Press. This book was released on 2022-06-21 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why the United States lags behind other industrialized countries in sharing the benefits of innovation with workers and how we can remedy the problem. The United States has too many low-quality, low-wage jobs. Every country has its share, but those in the United States are especially poorly paid and often without benefits. Meanwhile, overall productivity increases steadily and new technology has transformed large parts of the economy, enhancing the skills and paychecks of higher paid knowledge workers. What’s wrong with this picture? Why have so many workers benefited so little from decades of growth? The Work of the Future shows that technology is neither the problem nor the solution. We can build better jobs if we create institutions that leverage technological innovation and also support workers though long cycles of technological transformation. Building on findings from the multiyear MIT Task Force on the Work of the Future, the book argues that we must foster institutional innovations that complement technological change. Skills programs that emphasize work-based and hybrid learning (in person and online), for example, empower workers to become and remain productive in a continuously evolving workplace. Industries fueled by new technology that augments workers can supply good jobs, and federal investment in R&D can help make these industries worker-friendly. We must act to ensure that the labor market of the future offers benefits, opportunity, and a measure of economic security to all.
Download or read book The Concept Industry 4 0 written by Christoph Jan Bartodziej and published by Springer. This book was released on 2016-11-16 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Christoph Jan Bartodziej examines by means of an empirical study which potential Industry 4.0 technologies do have regarding end-to-end digital integration in production logistics based on their functions. According to the relevance of the concept Industry 4.0 and its early stage of implementation it is essential to clarify terminology, explain relations and identify drivers and challenges for an appropriate use of Industry 4.0 technologies. The results will constitute a profound basis to formulate recommendations for action for technology suppliers and technology users.
Download or read book Future Trends in Production Engineering written by Günther Schuh and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet and adapt to the current and future trends and issues in technology and society, the science committee of The German Academic Society for Production Engineering (WGP) continues to define future topics for production technology. These themes represent not only the key focus for the scientific work of the WGP, but also the central themes of the first annual conference in June 2011, whose paper is publically available in this volume. Such themes, including electric mobility, medical technology, lightweight construction, and resource efficiency, as well as mass production ability have all been identified as future, large-scale, and long-term drivers of change. Future trends influence changes sustainably and fundamentally; they permeate society, technology, economics, and value systems and have an effect in virtually all areas of life. The WGP has, as part of its research, established for itself the goal of not only observing these emerging changes, but also of supervising and influencing their development in order to ensure steady progress, secure sustainability, and shape the future.
Download or read book Manufacturing Technologies for Machines of the Future written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date view of manufacturing technologies. Written by leading experts from the USA, Europe, and Asia, both handbook and CD-ROM cover a wide range of topics ranging from industrial management and organization to automation and control, from mechanical to electronical technology, and from machine tools to the consumer goods industry. It gives a unique interdisciplinary and global presentation of material and combines, for the first time, theoretical and significant practical results from the last decades of the most important branches of machine building. Its broad coverage appeals to the highly skilled scientific expert as well as the experienced design engineer, and to undergraduate and advanced students.
Download or read book Tech Trends in Practice written by Bernard Marr and published by John Wiley & Sons. This book was released on 2020-04-09 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: ***BUSINESS BOOK AWARDS - FINALIST 2021*** Discover how 25 powerful technology trends are transforming 21st century businesses How will the latest technologies transform your business? Future Tech Trends in Practice will give you the knowledge of today’s most important technology trends, and how to take full advantage of them to grow your business. The book presents25 real-world technology trends along with their potential contributions to organisational success. You’ll learn how to integrate existing advancements and plan for those that are on the way. In this book, best-selling author, strategic business advisor, and respected futurist Bernard Marr explains the role of technology in providing innovative businesses solutions for companies of varying sizes and across different industries. He covers wide-ranging trends and provides an overview of how companies are using these new and emerging technologies in practice. You, too, can prepare your company for the potential and power of trending technology by examining these and other areas of innovation described in Future Tech Trends in Practice: Artificial intelligence, including machine and deep learning The Internet of Things and the rise of smart devices Self-driving cars and autonomous drones 3D printing and additive manufacturing Blockchain technology Genomics and gene editing Augmented, virtual and mixed reality When you understand the technology trends that are driving success, now and into the future, you’ll be better positioned to address and solve problems within your organisation.
