Download or read book Cumene Production Process Cost Analysis Cumene E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Cumene production from benzene and polymer grade (PG) propylene The process examined is a typical alkylation process. This report was developed based essentially on the following reference(s): Keywords: Isopropylbenzene, Phenol, Cumene Hydroperoxide

Download or read book Cumene Production Process Cost Analysis Cumene E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Cumene production from benzene and polymer grade (PG) propylene. The process examined is a typical alkylation process. This report was developed based essentially on the following reference(s): Keywords: Isopropylbenzene, Phenol, Cumene Hydroperoxide

Download or read book Phenol Production from Cumene Cost Analysis Phenol E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Phenol production from cumene The process examined is a typical hydroperoxidation process. In this process, acetone is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Isopropylbenzene, Carbolic Acid, Polimeri Europa, EniChem, Sunoco/UOP

Download or read book Phenthoate Production Process Cost Analysis Phenthoate E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Phenthoate production from EBPA, phosphorus pentasulfide, methanol, and toluene. In this process, phosphorus pentasulfide is dissolved in toluene and mixed with methanol to obtain TPA, which react with ammonia and further with EBPA to produce Phenthoate. This report was developed based essentially on the following reference(s): Keywords: KAP, Organothiophosphate Insecticide

Download or read book Bronopol Production Process Cost Analysis Bronopol E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of a typical Bronopol production process from sodium hydroxide, calcium chloride, nitromethane, and liquid bromine. In the process, caustic soda, calcium chloride, nitromethane and liquid bromine are mixed and subject to cold reaction. After the completion of mixing and reaction, crude bronopol is obtained. This report was developed based essentially on the following reference(s): Keywords: 2-Bromo-2-nitropropane-1,3-diol, Caustic Soda

Download or read book Isononanol Production Process Cost Analysis Isononanol E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isononanol production from octenes The process examined is similar to the process owned by Johnson Matthey OXO alcohols process. This report was developed based essentially on the following reference(s): (1) "OXO Process", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) US Patent 6946580, issued to Davy Process Technology Limited in 2005; Keywords: Oxo alcohol, Hydroformylation, Isononyl Alcohol, INA, ICI High Pressure Oxo Process, Johnson Matthey

Download or read book Nicotinamide Production Process Cost Analysis Nicotinamide E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Nicotinamide production from 2-methyl-1,5-pentanediamine (MPDA). The process examined is similar to Lonza process. In this process, MPDA is converted to 3-picoline. Picoline is reacted to form 3-cyanopyridine intermediate, which is hydrolyzed producing Nicotinamide. This report was developed based essentially on the following reference(s): Keywords: Niacinamide, Nicotinic Amide, Nicotinic Acid, Vitamin B3, Niacin, Enzymatic Hydrolysis

Download or read book Ziram Production Process Cost Analysis Ziram E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ziram production from dimethylamine, carbon disulfide, sodium hydroxide, and zinc sulfate. In the process, dimethyl amine reacts with carbon disulfide. The product is mixed with sodium hydroxide, producing a sodium salt which is oxidized by the addition of zinc sulfate, producing Thiram. This report was developed based essentially on the following reference(s): Keywords: Zinc Dimethyldithiocarbamate, Dimethyldithiocarbamic Acid Zinc Salt

Download or read book Amoxicillin Production Process Cost Analysis Amoxicillin E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Amoxicillin production from p-hydroxy phenylglycine. In this process, dane's salt, prepared from p-hydroxy phenylglycine, is dissolved in pivaloyl chloride, followed by the reaction with 6-APA, giving crystals. The crystals are then filtered and dried to obtain Amoxicillin. This report was developed based essentially on the following reference(s): Keywords: Amoxycillin, Dane's Salt, Amoxii

Download or read book Pentaerythritol Production Process Cost Analysis PER E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Pentaerythritol (PER) production from acetaldehyde and formaldehyde. In this process, formaldehyde and acetaldehyde go through a two-step reaction to form Pentaerythritol and sodium formate. The reactor product solution is sent to an evaporator and a trayed column for unconverted formaldehyde removal and concentration of the solution. The concentrated solution is then crystallized, dried and sent to storage. This report was developed based essentially on the following reference(s): Keywords: PER, polyol, neopolyol esters

Download or read book Polyoxymethylene Production Process Cost Analysis POM E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyacetal Resins (also known as Polyoxymethylene, POM) production from acetic anhydride and formaldehyde. The process examined is similar to the one owned by DuPont. In this process, starting formaldehyde (37wt% solution) is concentrated to a purity higher than 99.9wt% by means of two distillation steps and a treatment step. High purity formaldehyde is then polymerized in an inert cyclohexane medium. This report was developed based essentially on the following reference(s): (1) "Acetal Resins", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) US Patent 2768994, issued to Du Pont in 1956 Keywords: Acetyl resin, polyoxymethylene (POM) resins, polymer of formaldehyde, DuPont, polyformaldehyde

Download or read book BPA Production Process Cost Analysis BPA E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Bisphenol A (BPA) production from phenol and acetone. In this process, BPA is produced by the condensation reaction of acetone with phenol. The reaction is catalyzed by hydrogen chloride. This report was developed based essentially on the following reference(s): Keywords: Carbolic Acid, Propanone, Hooker Chemical, Occidental Chemical, OxyChem

Download or read book Isodecanol Production Process Cost Analysis Isodecanol E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isodecanol production from nonenes The process examined is a typical cobalt catalyst process. This report was developed based essentially on the following reference(s): Keywords: Oxo Alcohol, Classic Cobalt, Unmodified Cobalt, Oxo Process, Isodecyl Alcohol, IDA, ICI High Pressure Oxo Process, Johnson Matthey

Download or read book Trimethylolpropane Production Process Cost Analysis TMP E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Trimethylolpropane (TMP) production from formaldehyde and n-butyraldehyde. In this process, formaldehyde and n-butyraldehyde go through a two-step reaction to form Trimethylolpropane and sodium formate. Unconverted formaldehyde is recovered from the reactor product solution, sodium formate is separated by means of a solvent extraction step and Trimethylolpropane is purified by distillation. This report was developed based essentially on the following reference(s): (1) "Alcohols, Polyhydric", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) US Patent 3183274, issued to Celanese in 1965 Keywords: TMP, polyhydric alcohol, polyether polyols, alkide resins

Download or read book Dimethylfuran Production Process Cost Analysis DMF E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of an early stage process for Dimethylfuran (DMF) production from glucose syrup. The process examined is similar to the one proposed by the University of Wisconsin-Madison. In this process, glucose is isomerized to fructose, which is dehydrated forming hydroxymethylfurfural (HMF) intermediate. Then, HMF is converted to DMF. This report was developed based essentially on the following reference(s): Keywords: Glucose Isomerization, Dehydration, Biphasic Reactor

Download or read book Thiram Production Process Cost Analysis Thiram E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Thiram production from dimethylamine, carbon disulfide, sodium hydroxide, hydrogen peroxide, and sulfuric acid. In the process, dimethyl amine reacts with carbon disulfide. The product is mixed with sodium hydroxide, producing a sodium salt which is oxidized by the addition of a mixture of hydrogen peroxide and sulfuric acid, producing Thiram. This report was developed based essentially on the following reference(s): Keywords: Tetramethylthiuram Disulfide, Bis(dimethylthiocarbamoyl) Disulfide

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is a typical melt-phase polymerization followed by solid-state polymerization. In this process, initially an oligomer intermediate is produced by the esterification of PTA with ethylene glycol. The oligomer then undergoes a melt-polymerization and a solid-state polymerization, leading to a bottle grade PET. This report was developed based essentially on the following reference(s): (1) "Polyesters, Thermoplastic", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) "Polyesters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation