Download or read book Crystallization of IPS and HDPE Under Non isothermal Conditions written by Spencer Yew Chye Chew and published by . This book was released on 1990 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-05-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1992-07 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Mechanical and Physical Testing of Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites covers key aspects of fracture and failure in natural/synthetic fiber reinforced polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. Topics of interest include mechanical properties, such as tensile, flexural, compression, shear, impact, fracture toughness, low and high velocity impact, and anti-ballistic properties of natural fiber, synthetic fibers and hybrid composites materials. It also covers physical properties, such as density, water absorption, thickness swelling, and void content of composite materials fabricated from natural or synthetic materials. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. Contains contributions from leading experts in the field Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials Covers experimental, analytical and numerical analysis Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book Polymer Physics written by Wenbing Hu and published by Springer Science & Business Media. This book was released on 2012-11-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: A molecular view on the fundamental issues in polymer physics is provided with an aim at students in chemistry, chemical engineering, condensed matter physics and material science courses. An updated translation by the author, a renowned Chinese chemist, it has been proven to be an effective source of learning for many years. Up-to-date developments are reflected throughout the work in this concise presentation of the topic. The author aims at presenting the subject in an efficient manner, which makes this particularly suitable for teaching polymer physics in settings where time is limited, without having to sacrifice the extensive scope that this topic demands.
Download or read book Crystallization Modalities in Polymer Melt Processing written by Hermann Janeschitz-Kriegl and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure formation in crystallizing polymers, as occurring during processing, has not been treated so far in a coherent form. This fact explains, why this monograph is written as the ?rst book devoted to this subject. A quarter of a century ago the underdevelopment of this subject was obvious. Trial and error dominated. In fact, other apposite subjects as polymer melt rheology or heat transfer, had reached high levels. A great number of books has been devoted to them. Mold ?lling of amorphous polymers and the solidi?cation of these polymers by vitri?cation can nowadays be simulated numerically with a high degree of accuracy. In the solidi?ed sample even residual stresses and corresponding birefringence effects can accurately be 1 calculated . However, semicrystalline polymers, which form the majority of industrial po- mers, have been excluded from these considerations for good reasons. In fact, great uncertainties existed about the formation of quality determining crystalline str- tures. In particular, polyole?ns suffered from this shortcoming. In 1983 this fact instigated the polymer research group at the Johannes Kepler University in Linz to start with pertinent activities. The urgency of this kind of studies becomes evident, if advantages and hitches of these polymers are considered. 1. Versatility of processing: Injection molding into a great variety of shapes and sizes, from thin walled beakers to garden chairs, not to forget pipe and pro?le extrusion, cable coating, ?ber spinning, ?lm blowing. 2. Product qualities: Ductility, low density, good electric insulation, corrosion resistance, surface quality.
Download or read book Polymer Crystallization written by Jerold M. Schultz and published by . This book was released on 2001 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Syndiotactic Polystyrene written by Jürgen Schellenberg and published by John Wiley & Sons. This book was released on 2009-10-29 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Syndiotactic Polystyrene (SPS), synthesized in a laboratory for the first time in 1985, has become commercialized in a very short time, with wide acceptance on the global plastics market. Written by leading experts from academia and industry from all over the world, Syndiotactic Polystyrene offers a comprehensive review of all aspects of SPS of interest to both science and industry, from preparation and properties to applications. This essential reference to SPS covers: The preparation of syndiotactic polystyrene by half-metallocenes and other transition metal catalysts The structure and fundamental properties, especially morphology and crystallization and solution behavior The commercial process for SPS manufacturing Properties, processing, and applications of syndiotactic polystyrenes Polymers based on syndiotactic polystyrenes, for example, by functionalization and modification, and nanocomposites Ideal for polymer chemists, physicists, plastics engineers, materials scientists, and all those dealing with plastics manufacturing and processing, this important resource provides the information one needs to compare, select, and integrate an appropriate materials solution for industrial use or research.
Download or read book Fast Scanning Calorimetry written by Christoph Schick and published by Springer. This book was released on 2016-06-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the scan rate range of calorimeters has been extended tremendously at the high end, from approximately 10 up to 10 000 000 °C/s and more. The combination of various calorimeters and the newly-developed Fast Scanning Calorimeters (FSC) now span 11 orders of magnitude, by which many processes can be mimicked according to the time scale(s) of chemical and physical transitions occurring during cooling, heating and isothermal stays in case heat is exchanged. This not only opens new areas of research on polymers, metals, pharmaceuticals and all kinds of substances with respect to glass transition, crystallization and melting phenomena, it also enables in-depth study of metastability and reorganization of samples on an 1 to 1000 ng scale. In addition, FSC will become a crucial tool for understanding and optimization of processing methods at high speeds like injection molding. The book resembles the state-of-the art in Thermal Analysis & Calorimetry and is an excellent starting point for both experts and newcomers in the field.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Mineralogy for Petrologists written by Michel Andre Demange and published by CRC Press. This book was released on 2012-05-21 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a categorized and visualized overview and presents microscopic observations, systematic mineralogy, chemistry, geology, stability, paragenesis, occurrence and use in petrology of 137 minerals. Structural formula calculations are included in the appendix. Consists of a set of book and CD-ROM for students and practically-oriented researchers and professionals in geology, geological, mining, and mineral resources engineering who need a reference of mineralogy, applied to petrology. The CD-ROM contains 384 color plates with mineral microscopic visuals under various circumstances.
Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.
Download or read book ACS Style Guide written by Anne M. Coghill and published by American Chemical Society. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the time since the second edition of The ACS Style Guide was published, the rapid growth of electronic communication has dramatically changed the scientific, technical, and medical (STM) publication world. This dynamic mode of dissemination is enabling scientists, engineers, and medicalpractitioners all over the world to obtain and transmit information quickly and easily. An essential constant in this changing environment is the requirement that information remain accurate, clear, unambiguous, and ethically sound.This extensive revision of The ACS Style Guide thoroughly examines electronic tools now available to assist STM writers in preparing manuscripts and communicating with publishers. Valuable updates include discussions of markup languages, citation of electronic sources, online submission ofmanuscripts, and preparation of figures, tables, and structures. In keeping current with the changing environment, this edition also contains references to many resources on the internet.With this wealth of new information, The ACS Style Guide's Third Edition continues its long tradition of providing invaluable insight on ethics in scientific communication, the editorial process, copyright, conventions in chemistry, grammar, punctuation, spelling, and writing style for any STMauthor, reviewer, or editor. The Third Edition is the definitive source for all information needed to write, review, submit, and edit scholarly and scientific manuscripts.
