Download or read book Crystalline Silicon Solar Cells written by Adolf Goetzberger and published by . This book was released on 1998 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystalline Silicon written by Sukumar Basu and published by BoD – Books on Demand. This book was released on 2011-07-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exciting world of crystalline silicon is the source of the spectacular advancement of discrete electronic devices and solar cells. The exploitation of ever changing properties of crystalline silicon with dimensional transformation may indicate more innovative silicon based technologies in near future. For example, the discovery of nanocrystalline silicon has largely overcome the obstacles of using silicon as optoelectronic material. The further research and development is necessary to find out the treasures hidden within this material. The book presents different forms of silicon material, their preparation and properties. The modern techniques to study the surface and interface defect states, dislocations, and so on, in different crystalline forms have been highlighted in this book. This book presents basic and applied aspects of different crystalline forms of silicon in wide range of information from materials to devices.
Download or read book Crystalline Silicon Solar Cells written by Saleem Hussain Zaidi and published by Springer Nature. This book was released on 2021-08-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on crystalline silicon solar cell science and technology. It is written from the perspective of an experimentalist with extensive hands-on experience in modeling, fabrication, and characterization. A practical approach to solar cell fabrication is presented in terms of its three components: materials, electrical, and optical. The materials section describes wafer processing methods including saw damage removal, texturing, diffusion, and surface passivation. The electrical section focuses on formation of ohmic contacts on n and p-doped surfaces. The optical section illustrates light interaction with textured silicon surfaces in terms of geometrical, diffractive and physical optics, transmission, and surface photovoltage (SPV) spectroscopy. A final chapter analyzes performance of solar cells, fabricated with a wide range of process parameters. A brief economic analysis on the merits of crystalline silicon-based photovoltaic technology as a cottage industry is also included./div This professional reference will be an important resource for practicing engineers and technicians working with solar cell and PV manufacturing and renewable energy technologies, as well as upper-level engineering and material science students. Presents a practical approach to solar cell fabrication, and characterization; Offers modular methodology with detailed equipment and process parameters supported by experimental results; Includes processing diagrams and tables for 16% efficient solar cell fabrication.
Download or read book Thin Film Crystalline Silicon Solar Cells written by Rolf Brendel and published by John Wiley & Sons. This book was released on 2011-02-15 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to the physics of silicon solar cells focuses on thin cells, while reviewing and discussing the current status of the important technology. An analysis of the spectral quantum efficiency of thin solar cells is given as well as a full set of analytical models. This is the first comprehensive treatment of light trapping techniques for the enhancement of the optical absorption in thin silicon films.
Download or read book Amorphous Silicon Crystalline Silicon Heterojunction Solar Cells written by Wolfgang Rainer Fahrner and published by Springer Science & Business Media. This book was released on 2013-04-23 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous Silicon/Crystalline Silicon Solar Cells deals with some typical properties of heterojunction solar cells, such as their history, the properties and the challenges of the cells, some important measurement tools, some simulation programs and a brief survey of the state of the art, aiming to provide an initial framework in this field and serve as a ready reference for all those interested in the subject. This book helps to “fill in the blanks” on heterojunction solar cells. Readers will receive a comprehensive overview of the principles, structures, processing techniques and the current developmental states of the devices. Prof. Dr. Wolfgang R. Fahrner is a professor at the University of Hagen, Germany and Nanchang University, China.
Download or read book Physics and Technology of Amorphous Crystalline Heterostructure Silicon Solar Cells written by Wilfried G. J. H. M. van Sark and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-07-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely, comprehensive work on solar cell surface passivation will collect and convey the scientific and technological progress provided by universities, research institutes and companies to implement dielectric passivation layers into the solar cell manufacturing process for c-Si solar cells. With a focus on industrial manufacturing it will comprehensively cover all promising techniques and describe the process from material research to full production implementation of dielectric layers for silicon solar cell passivation.
Download or read book Amorphous and Crystalline Silicon Carbide IV written by Cary Y. Yang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide and other group IV-IV materials in their amorphous, microcrystalline, and crystalline forms have a wide variety of applications.The contributions to this volume report recent developments and trends in the field. The purpose is to make available the current state of understanding of the materials and their potential applications. Eachcontribution focuses on a particular topic, such as preparation methods, characterization, and models explaining experimental findings. The volume also contains the latest results in the exciting field of SiGe/Si heterojunction bipolar transistors. The reader will find this book valuable as a reference source, an up-to-date and in-depth overview of this field, and, most importantly, as a window into the immense range of reading potential applications of silicon carbide. It is essential for scientists, engineers and students interested in electronic materials, high-speed heterojunction devices, and high-temperature optoelectronics.
Download or read book Semiconductor Silicon Crystal Technology written by Fumio Shimura and published by Elsevier. This book was released on 2012-12-02 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Silicon Crystal Technology provides information pertinent to silicon, which is the dominant material in the semiconductor industry. This book discusses the technology of integrated circuits (ICs) in electronic materials manufacturer. Comprised of eight chapters, this book provides an overview of the basic science, silicon materials, IC device fabrication processes, and their interaction for enhancing both the processes and materials. This text then proceeds with a discussion of the atomic structure and bonding mechanisms in order to understand the nature and formation of crystal structures, which are the fundamentals of material science. Other chapters consider the technological crystallography and classify natural crystal morphologies based on observation. The final chapter deals with the interrelationships among silicon material characteristics, circuit design, and IC fabrication in order to ensure the fabrication of very-large-scale-integration/ultra-large-scale-integration circuits. This book is a valuable resource for graduate students, physicists, engineers, materials scientists, and professionals involved in semiconductor industry.
Download or read book Polycrystalline Silicon for Integrated Circuits and Displays written by Ted Kamins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polycrystalline Silicon for Integrated Circuits and Displays, Second Edition presents much of the available knowledge about polysilicon. It represents an effort to interrelate the deposition, properties, and applications of polysilicon. By properly understanding the properties of polycrystalline silicon and their relation to the deposition conditions, polysilicon can be designed to ensure optimum device and integrated-circuit performance. Polycrystalline silicon has played an important role in integrated-circuit technology for two decades. It was first used in self-aligned, silicon-gate, MOS ICs to reduce capacitance and improve circuit speed. In addition to this dominant use, polysilicon is now also included in virtually all modern bipolar ICs, where it improves the basic physics of device operation. The compatibility of polycrystalline silicon with subsequent high-temperature processing allows its efficient integration into advanced IC processes. This compatibility also permits polysilicon to be used early in the fabrication process for trench isolation and dynamic random-access-memory (DRAM) storage capacitors. In addition to its integrated-circuit applications, polysilicon is becoming vital as the active layer in the channel of thin-film transistors in place of amorphous silicon. When polysilicon thin-film transistors are used in advanced active-matrix displays, the peripheral circuitry can be integrated into the same substrate as the pixel transistors. Recently, polysilicon has been used in the emerging field of microelectromechanical systems (MEMS), especially for microsensors and microactuators. In these devices, the mechanical properties, especially the stress in the polysilicon film, are critical to successful device fabrication. Polycrystalline Silicon for Integrated Circuits and Displays, Second Edition is an invaluable reference for professionals and technicians working with polycrystalline silicon in the integrated circuit and display industries.
Download or read book Properties of Crystalline Silicon written by Robert Hull and published by IET. This book was released on 1999 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and well-organized reference, this book provides illuminating data, distinctive insight and expert guidance on silicon properties.
Download or read book Crystal Growth and Evaluation of Silicon for VLSI and ULSI written by Golla Eranna and published by CRC Press. This book was released on 2014-12-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon, as a single-crystal semiconductor, has sparked a revolution in the field of electronics and touched nearly every field of science and technology. Though available abundantly as silica and in various other forms in nature, silicon is difficult to separate from its chemical compounds because of its reactivity. As a solid, silicon is chemically inert and stable, but growing it as a single crystal creates many technological challenges. Crystal Growth and Evaluation of Silicon for VLSI and ULSI is one of the first books to cover the systematic growth of silicon single crystals and the complete evaluation of silicon, from sand to useful wafers for device fabrication. Written for engineers and researchers working in semiconductor fabrication industries, this practical text: Describes different techniques used to grow silicon single crystals Explains how grown single-crystal ingots become a complete silicon wafer for integrated-circuit fabrication Reviews different methods to evaluate silicon wafers to determine suitability for device applications Analyzes silicon wafers in terms of resistivity and impurity concentration mapping Examines the effect of intentional and unintentional impurities Explores the defects found in regular silicon-crystal lattice Discusses silicon wafer preparation for VLSI and ULSI processing Crystal Growth and Evaluation of Silicon for VLSI and ULSI is an essential reference for different approaches to the selection of the basic silicon-containing compound, separation of silicon as metallurgical-grade pure silicon, subsequent purification, single-crystal growth, and defects and evaluation of the deviations within the grown crystals.
Download or read book Thin Film Transistors Polycrystalline silicon thin film transistors written by Yue Kuo and published by Springer Science & Business Media. This book was released on 2004 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first reference on amorphous silicon and polycrystalline silicon thin film transistors that gives a systematic global review of all major topics in the field. These volumes include sections on basic materials and substrates properties, fundamental device physics, critical fabrication processes (structures, a-Si: H, dielectric, metallization, catalytic CVD), and existing and new applications. The chapters are written by leading researchers who have extensive experience with reputed track records. Thin Film Transistors provides practical information on preparing individual functional a-Si: H TFTs and poly-Si TFTs as well as large-area TFT arrays. Also covered are basic theories on the a-Si: H TFT operations and unique material characteristics. Readers are also exposed to a wide range of existing and new applications in industries.
Download or read book Amorphous and Crystalline Silicon Carbide II written by Mahmud M. Rahman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains written versions of the papers presented at the Second Inter national Conference on Amorphous and Crystalline Silicon Carbide and Related Materials (ICACSC 1988), which was held at Santa Clara University on Decem ber 15 and 16, 1988. The conference followed the First ICACSC held at Howard University, Washington DC, in December 1987 and continued to provide an in ternational forum for discussion and exchange of ideas and results covering the current status of research on SiC and related materials. ICACSC 1988 attracted 105 participants from five countries. The substantial increase in the number of papers compared with the previous year is an indication of the growing interest in this field. Of the 45 papers presented at the conference, 36 refereed manuscripts are included in this volume, while the remaining 9 appear as abstracts. The six invited papers provide detailed reviews of recent results on amorphous and crystalline silicon carbide materials and devices, as well as diamond thin films. The volume is divided into six parts, each covering an important theme of the conference.
Download or read book Atomic Layer Deposition in Energy Conversion Applications written by Julien Bachmann and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the two topics for the first time, this book begins with an introduction to the recent challenges in energy conversion devices from a materials preparation perspective and how they can be overcome by using atomic layer deposition (ALD). By bridging these subjects it helps ALD specialists to understand the requirements within the energy conversion field, and researchers in energy conversion to become acquainted with the opportunities offered by ALD. With its main focus on applications of ALD for photovoltaics, electrochemical energy storage, and photo- and electrochemical devices, this is important reading for materials scientists, surface chemists, electrochemists, electrotechnicians, physicists, and those working in the semiconductor industry.
Download or read book McEvoy s Handbook of Photovoltaics written by Soteris Kalogirou and published by Academic Press. This book was released on 2017-08-24 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Photovoltaics, Third Edition, is a 'benchmark' publication for those involved in the design, manufacture and use of these devices. This fully revised handbook includes brand new sections on smart grids, net metering and the modeling of photovoltaic systems, as well as fully revised content on developments in photovoltaic applications, the economics of PV manufacturing and updated chapters on solar cell function, raw materials, photovoltaic standards, calibration and testing, all with new examples and case studies. The editor has assembled internationally-respected contributors from industry and academia around the world to make this a truly global reference. It is essential reading for electrical engineers, designers of systems, installers, architects, policymakers and physicists working with photovoltaics. Presents a cast of international experts from industry and academia to ensure the highest quality information from multiple stakeholder perspectives Covers all things photovoltaics, from the principles of solar cell function and their raw materials, to the installation and design of full photovoltaic systems Includes case studies, practical examples, and reports on the latest advances and worldwide applications
Download or read book Liquid Crystal on Silicon Devices written by Andrés Márquez and published by MDPI. This book was released on 2019-11-19 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid Crystal on Silicon (LCoS) has become one of the most widespread technologies for spatial light modulation in optics and photonics applications. These reflective microdisplays are composed of a high-performance silicon complementary metal oxide semiconductor (CMOS) backplane, which controls the light-modulating properties of the liquid crystal layer. State-of-the-art LCoS microdisplays may exhibit a very small pixel pitch (below 4 μm), a very large number of pixels (resolutions larger than 4K), and high fill factors (larger than 90%). They modulate illumination sources covering the UV, visible, and far IR. LCoS are used not only as displays but also as polarization, amplitude, and phase-only spatial light modulators, where they achieve full phase modulation. Due to their excellent modulating properties and high degree of flexibility, they are found in all sorts of spatial light modulation applications, such as in LCOS-based display systems for augmented and virtual reality, true holographic displays, digital holography, diffractive optical elements, superresolution optical systems, beam-steering devices, holographic optical traps, and quantum optical computing. In order to fulfil the requirements in this extensive range of applications, specific models and characterization techniques are proposed. These devices may exhibit a number of degradation effects such as interpixel cross-talk and fringing field, and time flicker, which may also depend on the analog or digital backplane of the corresponding LCoS device. The use of appropriate characterization and compensation techniques is then necessary.
