Download or read book Crystalline Oxide Volume 747 written by D. G. Schlom and published by . This book was released on 2003-06-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of two symposia held at the 2002 MRS Fall Meeting in Boston. Papers from Symposium T, Crystalline Oxides on Semiconductors, bring together experts from different technology areas - high-k gate dielectrics, novel memories, and ferroelectrics, for example - to examine commonality among the fields. These papers offer an overview of the field, highlight interesting experimental results and device ideas, and feature innovative theoretical approaches to understanding these systems. Symposium V, Interfacial Issues for Oxide-Based Electronics, covers a wide range of topics involving the interfaces between electro-optical oxide layers and other materials. Overall, it is clear that a new generation of materials and heterostructures has been enabled by the increasing control of interfacial phenomena. Topics include: epitaxial oxide-silicon heterostructures; ferroelectric thin films on silicon; theory and modeling; crystalline oxides for gate dielectrics; transparent conducting oxides; transparent conducting oxides and oxide growth and properties; field effect devices and gate dielectrics; ferroelectrics, capacitors and sensors; organic devices and interfacial growth issues.
Download or read book Novel Materials and Processes for Advanced CMOS Volume 745 written by Mark I. Gardner and published by . This book was released on 2003-03-25 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in MOS integrated-circuit technology is largely driven by the ability to dimensionally scale the constituent components of individual devices and their associated interconnections. Given a set of materials with fixed properties, this scaling is finite and its predicted limits are rapidly approaching. The International Technology Roadmap for Semiconductors establishes the pace at which this scaling occurs and identifies many of the technological challenges ahead. This volume assembles representatives from the fields of materials science, physics, electrical and chemical engineering to provide an insightful review of current technology and understanding. Specifically, the intent is to discuss materials issues stemming from device scaling to sub-100nm technology nodes. Topics include: high-k characterization; atomic layer deposition; gate metal materials and integration; contacts and ultrashallow junction formation; theory and modeling and crystalline oxides for gate dielectrics.
Download or read book GaN and Related Alloys 2002 Volume 743 written by Materials Research Society. Meeting and published by . This book was released on 2003-06-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: This year's nitride symposium showed the scope of nitride-related advances spanning basic materials physics over process technology to high-performance devices. Progress was reported in bulk growth of GaN and AlN, growth on various substrates and substrate orientations, optical properties of InN, defect and doping analysis of p-doped GaN, and polarization properties. These led to new performance records in visible light emitter technology, i.e., higher efficiency/higher brightness, UV emitters with shorter wavelength, and UV and photo detectors. Advances in the development of nitride-based electronic devices with new heterostructure FET designs for RF power applications, including those on Si substrates and wafer fusion, are also reported. This book captures the exciting developments in this rapidly progressing field. Topics include: epitaxy - devices and defect reduction; defects and characterization; epitaxy - nonpolar orientations and alloys; optical properties; UV emitters and detectors; visible light emitters; electronic devices; characterization of defects and transport; and contacts, processing and p-type nitrides.
Download or read book Solid State Ionics 2002 Volume 756 written by Philippe Knauth and published by . This book was released on 2003-04-17 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Solid State Chemistry of Inorganic Materials IV Volume 755 written by M. Á. Alario-Franco and published by . This book was released on 2003-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in the mid-twentieth century, solid-state chemistry has matured within the chemical sciences. In the same way that chemistry itself is considered a central science, solid-state chemistry is central in its many relations to physics, in particular to solid-state physics and also to materials science and engineering. There are few problems in materials science or engineering in which the preparation of the material itself is not a central issue and, more often than not, this will be a solid-state chemical problem. For these reasons, it is not surprising that in the technological development of the last century, solid-state chemistry has grown in importance. It is not only a synthesis science, it is also the science of structures, defects, stoichiometry, and physical chemical properties. Most of these are explored in the book. Topics include: metal-to-insulator transition; porous materials; dielectric materials; nanomaterials; synthesis of materials; films and catalytic materials; CMR materials; thermoelectric materials; dielectrics, catalysts, phosphors, films and properties and synthesis and crystal growth.
Download or read book Magnetoelectronics and Magnetic Materials Novel Phenomena and Advanced Characterization Volume 746 written by Shufeng Zhang and published by . This book was released on 2003-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the proceedings of Symposium Q, Magnetoelectronics-Novel Magnetic Phenomena in Nanostructures, and Symposium R, Advanced Characterization of Artificially Structured Magnetic Materials, both from the 2002 MRS Fall Meeting in Boston. The common focus is on artificially engineered nanostructured magnetic systems. The two symposia address new phenomena in magnetoelectronic applications, their preparation, and advanced methodology for characterization. Interest in nanomagnetism has been catalyzed by advances in two fields of research. 1) Advances in materials synthesis of structures whose length scales transcend magnetic length scales and open the possibility for creating materials with new magnetic properties. Such structures include interfaces, superlattices, tunneling devices, nanostructures, and single-molecule magnets. 2) Advances in sample characterization techniques for nano-magnetism which allow detailed exploration of structure-property relationships in nanostructured magnetic systems. The volume highlights current trends in both fields and offers an outlook for further advances and new capabilities.
Download or read book Chemical Mechanical Planarization Volume 767 written by Duane S. Boning and published by . This book was released on 2003-08-27 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical-mechanical planarization (CMP) has emerged as a critical fabrication technology for advanced integrated circuits. Even as the applications of CMP have diversified and we have begun to understand aspects of the physics and chemistry of the process, a new generation of CMP innovations is unfolding. New slurries and consumables are under development. New applications to novel devices continue to appear. This book, the most recent in a successful series on CMP, offers a review of the advances to date and provides a comprehensive discussion of the future challenges that must be overcome. Presentations from academia, government labs and industry are featured. Topics include; CMP modeling; CMP science; CMP slurries and particles for planarization of copper, oxide, and other materials; planarization applications including shallow trench isolation (STI), copper damascene, and novel devices and CMP integration.
Download or read book Three Dimensional Nanoengineered Assemblies Volume 739 written by T. M. Orlando and published by . This book was released on 2003-06-13 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in nanoscale materials processing are taking place at a rapid pace via myriad paths, including lithography, production of nanoparticle assemblies, surface manipulation and many others. Several of the techniques create structures that are three-dimensional or quasi three-dimensional. Even smaller structures intended to be two-dimensional have a 'more' three-dimensional geometry as their two-dimensional feature size and layer thickness become similar. The properties of these denser assemblies are driving different applications in electronics (single-electron devices), optics (photonic crystals and switches) and elsewhere. This 2003 book provides a venue for a productive scientific and technical exchange. The result is a compilation of papers which address fundamental studies, technological advances and novel approaches to developing and processing three-dimensional nanoscale assemblies. Topics include: nanofabrication via lithographic techniques; unconventional fabrication methods of nano-structures; physics, chemistry and modeling of nanostructures; fabrication and properties of 1D nanostructures; fabrication and properties of 3D nanostructures; applications of nanostructures and devices.
Download or read book Nanostructuring Materials with Energetic Beams Volume 777 written by A. Meldrum and published by . This book was released on 2003-06-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Structure Property Relationships of Oxide Surfaces and Interfaces II Volume 751 written by Materials Research Society. Meeting and published by . This book was released on 2003-05-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because surfaces and interfaces found in oxide systems are strikingly complex, they can only be fully understood when examined at an atomic level. Yet for the materials scientist, such understanding is of paramount importance since future technological advances require it. This book, the second in a new series from the Materials Research Society, addresses structure-property relationships in these systems. Compared to the first proceedings, here we see a shift towards less well-defined materials that often more closely resemble reality, and an increasing effort to study these phenomena using in situ techniques. Of particular interest are discussions on the dynamical evolution of surface structure and relationships between the structure of surfaces, their stoichiometry and the distribution of bulk dislocations, which in turn can control the growth and retraction of islands and pits. Modeling and characterization of thin intergranular films, with a focus on how these films influence the properties of so many ceramic materials, are also addressed.
Download or read book Kirk Othmer Encyclopedia of Chemical Technology Index to Volumes 1 26 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-03-23 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. Set began publication in January 2004 Over 1000 articles More than 600 new or updated articles 27 volumes Reviews from the previous edition: "The most indispensable reference in the English language on all aspects of chemical technology...the best reference of its kind". —Chemical Engineering News, 1992 "Overall, ECT is well written and cleanly edited, and no library claiming to be a useful resource for chemical engineering professionals should be without it." —Nicholas Basta, Chemical Engineering, December 1992
Download or read book Supercooled Liquids Glass Transition and Bulk Metallic Glasses Volume 754 written by Takeshi Egami and published by . This book was released on 2003-07-16 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a renaissance in glass science brought about by the development of concepts such as fragility index and the energy landscape with megabasins. Research on bulk metallic glasses has been explosive since their advent when MRS offered its first book on the topic. In 2000, a second book broadened the scope to include supercooled liquid, bulk glassy and nanocrystalline states. This book enhances the scope to include glass transition in diverse materials such as water, silicate and polymeric melts. Bringing these threads together in an interdisciplinary manner was fruitful and offers proof that while there is much common ground, gaps between various approaches to the glassy state remain to be bridged. Subjects include: the supercooled liquid; glass formability; structural relaxation and dynamics; structure determination and modeling; processing and applications of bulk metallic glasses; mechanical properties; mechanical properties - composites; crystallization; electronic and magnetic structure and properties; and nanoparticles and nonmetallic glasses.
Download or read book Materials Inspired by Biology written by James L. Thomas (Ph. D.) and published by . This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continued interest in the field of biologically inspired materials is strongly motivated by the fact that the nanoscale and microscale organization found in biological materials often leads to exceptional macroscopic materials properties. The ability to mimic these structures should lead to new synthetic materials with similarly remarkable behavior in both biomedical and materials arenas. This has led to an enormous amount of research in a variety of materials areas, including those aimed at: 1) unique ceramics or composites for use in biomaterials, magnetic and optical applications; 2) self-assembled biopolymeric systems for use in biomaterials and biosensor applications; and 3) colloidal and amphiphilic systems for application in biomedicine, nanotechnology and biosensors. Accordingly, this volume brings together a broad range of researchers whose interests span the full breadth of biology, and in addition, those who find different inspiration in biology itself. For some, that inspiration is in the creation of new materials that have important biological (especially biomedical) applications. For others, it is the imitation of the behavior of a biological material, molecule or process that is of interest. Finally, with increasing frequency, researchers are drawing inspiration from the synthetic pathways that biology uses, exploiting these pathways, and modifying them chemically or genetically to make entirely novel molecules and materials. Biologically inspired materials is a rapidly evolving arena of materials science research, and the work presented here reflects recent advances and new perspectives in the field. Topics include: tissue engineering and biomaterials; novel biomimeticand bioinspired polymers; biomineralization, colloidal and templated materials; and amphiphilic membranes and surfaces.
Download or read book Solid State Ionics written by and published by . This book was released on 2003 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure property Relationships of Oxide Surfaces and Interfaces written by and published by . This book was released on 2003 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Applications for Wide Bandgap Semiconductors Volume 764 written by Materials Research Society. Meeting and published by . This book was released on 2003-09-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide-bandgap semiconductors such as SiC, GaN and related alloys, BN and related alloys, ZnGeSiN2, ZnO, and others continue to find new applications in solid-state lighting, sensors, filters, high-power electronics, biological detection, and spintronics. Improved bulk and epitaxial growth, processing, device design, and understanding of the physics of transport in heterostructures are all necessary for realization of these new technologies. The papers in this book span a range of subjects from material growth and characterization to the processing and application of devices in the electronic, as well as the optoelectronic, fields. Topics include: special invited papers; growth, processing and devices; novel applications for wide-bandgap semiconductors; oxides, heterostructures and devices; processing and devices and emerging areas.
Download or read book CMOS Front End Materials and Process Technology Volume 765 written by Materials Research Society. Meeting and published by . This book was released on 2003-09-12 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the future, because fundamental materials and process limits are being approached, continued transistor scaling will not be as straightforward. Future complementary metal-oxide semiconductor (MOS) transistors will require high-permittivity (high-k) gate dielectrics and metal gate electrodes, as well as low-resistance ultrashallow junctions, in order to meet the stringent specifications of the International Technology Roadmap for Semiconductors. Techniques to improve transconductance and drive current may also be required. Process integration issues must be solved, and reliability must be assured, before any new material or processing technique can be used in IC manufacture. A further complication is that the key challenges will differ according to application. This book reports research results from industry, government labs and academia covering a wide scope of front-end process issues for future CMOS technologies. Topics include: advanced materials and structures; high-k dielectrics; advanced gate stack materials; heterogeneous integration and strained Si technologies; ultrashallow junction technology; strained Si and source/drain technology; and laser annealing and silicide processes.