Download or read book Crystal Fields for Transition Metal Ions in Laser Host Materials written by Clyde A. Morrison and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A researcher trying to predict or interpret spectra of transition metal ionsin possible laser host materials is confronted with a variety of different methods of describing the same physical situation. This book provides a systematic approach to the applied theory of crystal-field interactions of transition metal ions in 49 crystalline hosts that are or show promise of being good laser materials. The tables that make up the main part of the book present the experimentally determined parameters of the 3dN, 4dN, and 5dN transition-metal ions in the second, third, and fourth ionization states. These parameters have been converted to Slater and crystal-field parameters. The book is a source for research workers in laser development and in crystal-field theory, and for graduate students of solid state chemistry and physics.
Download or read book Crystal Field for Transition metal Ions in Laser Host Materials written by Clyde Arthur Morrison and published by . This book was released on 1992 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Host Materials for Transition metal Ions with the NdN Electronic Configuration written by Clyde A. Morrison and published by . This book was released on 1985 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data are given on 12 host materials for lasers that use the transition metal ions. Included in each section are the crystallographic data, x-ray data, lattice sum parameters A sub nm, crystal field parameters B sub nm(Dq), and spin-orbit constants (xi). One section contains the phenomenological free ion parameters F (superscript k), (xi) and alpha, which have been obtained by fitting the reported free ion data. There is a bibliography for each host which, dependent on that particular host, is more or less complete. The data contained on each host material as well as on new host materials will be added periodically.
Download or read book Theoretical Spectroscopy of Transition Metal and Rare Earth Ions written by Mikhail G. Brik and published by CRC Press. This book was released on 2019-12-11 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail the main concepts of theoretical spectroscopy of transition metal and rare-earth ions. It shows how the energy levels of different electron configurations are formed and calculated for the ions in a free state and in crystals, how group theory can help in solving main spectroscopic problems, and how the modern DFT-based methods of calculations of electronic structure can be combined with the semi-empirical crystal field models. The style of presentation makes the book helpful for a wide audience ranging from graduate students to experienced researchers. Performance of optical materials crucially depends on the impurity ions intentionally introduced into the crystalline host materials. The color of these materials, their emission and absorption spectra can be understood by analyzing the relations between the electronic properties of impurity ions and host crystal structure, which constitutes the main content of this book. It describes in detail the main concepts of theoretical spectroscopy of transition metal and rare earth ions.
Download or read book Crystal Field Engineering of Solid State Laser Materials written by Brian Henderson and published by Cambridge University Press. This book was released on 2000-07-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the underlying science and design of laser materials. It emphasizes the principles of crystal-field engineering and discusses the basic physical concepts that determine laser gain and nonlinear frequency conversion in optical crystals. Henderson and Bartram develop the predictive capabilities of crystal-field engineering to show how modification of the symmetry and composition of optical centers can improve laser performance. They also discuss applications of the principles of crystal-field engineering to a variety of optical crystals in relation to the performances of laser devices. This book will be of considerable interest to physical, chemical and material scientists and to engineers involved in the science and technology of solid state lasers.
Download or read book Physics of Solid State Laser Materials written by Richard C. Powell and published by Springer Science & Business Media. This book was released on 1998-03-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level text presents the fundamental physics of solid-state lasers, including the basis of laser action and the optical and electronic properties of laser materials. After an overview of the topic, the first part begins with a review of quantum mechanics and solid-state physics, spectroscopy, and crystal field theory; it then treats the quantum theory of radiation, the emission and absorption of radiation, and nonlinear optics; concluding with discussions of lattice vibrations and ion-ion interactions, and their effects on optical properties and laser action. The second part treats specific solid-state laser materials, the prototypical ruby and Nd-YAG systems being treated in greatest detail; and the book concludes with a discussion of novel and non-standard materials. Some knowledge of quantum mechanics and solid-state physics is assumed, but the discussion is as self-contained as possible, making this an excellent reference, as well as useful for independent study.
Download or read book Spectroscopy of Solid state Laser and Luminescent Materials written by Zundu Luo and published by Nova Publishers. This book was released on 2007 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state laser and luminescent materials activated by rare-earth or transition metals ions are widely used for solid-state lasers, luminescent lamps, flat displays, optical fibre communication systems, and other photonic devices. The unique solid-state electronic properties enable the activators in solids to emit photons efficiently in visible and IR regions. The rapid advances in both materials science and optoelectronics, particularly, the development of new methods of material synthesis and device fabrication, have been stimulating the growing interests in the deep insights of spectroscopic properties of solid-state laser and luminescent materials. This book brings together essential and practical knowledge of spectroscopic physics. This includes, atomic spectroscopy, mathematical theory, rare earth ions in materials, light emission and absorption, spectral properties, non-radiative transitions and energy migration.
Download or read book Physics of Solid State Laser Materials written by Zundu Luo and published by Springer Nature. This book was released on 2020-04-07 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the spectral properties of solid-state laser materials, including emission and absorption of light, the law of radiative and nonradiative transitions, the selection rule for optical transitions, and different calculation methods of the spectral parameters. The book includes a systematic presentation of the authors' own research works in this field, specifically addressing the stimulated nonradiative transition theory and the apparent crystal field model. This volume is helpful resource for researchers and graduate students in the fields of solid spectroscopy and solid-state laser material physics, while also serving as a valuable reference guide for instructors and advanced students of physics.
Download or read book From Energy Storage to Photofunctional Materials written by Rainer Pöttgen and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-12-05 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many elements and inorganic compounds play an extraordinary role in daily life for numerous applications, e. g., construction materials, inorganic pigments, inorganic coatings, steel, glass, technical gases, energy storage and conversion materials, fertilizers, homogeneous and heterogeneous catalysts, photofunctional materials, semiconductors, superconductors, soft- and hard magnets, technical ceramics, hard materials, or biomedical and bioactive materials. The present book is written by experienced authors who give a comprehensive overview on the many chemical and physico-chemical aspects related to application of inorganic compounds and materials in order to introduce senior undergraduate and postgraduate students (chemists, physicists, materials scientists, engineers) into this broad field. Volume 2 discusses energy storage, ionic solids, catalytic materials and photofunctional materials. Vol. 1. From Construction Materials to Technical Gases. Vol. 3. From Magnetic to Bioactive Materials.
Download or read book Spectroscopic Methods in Mineralogy written by A. Beran and published by The Mineralogical Society of Great Britain and Ireland. This book was released on 2004 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Properties of 3d Ions in Crystals written by Nicolae M. Avram and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Optical Properties of 3d-Ions in Crystals: Spectroscopy and Crystal Field Analysis" discusses spectral, vibronic and magnetic properties of 3d-ions in a wide range of crystals, used as active media for solid state lasers and potential candidates for this role. Crystal field calculations (including first-principles calculations of energy levels and absorption spectra) and their comparison with experimental spectra, the Jahn-Teller effect, analysis of vibronic spectra, materials science applications are systematically presented. The book is intended for researchers and graduate students in crystal spectroscopy, materials science and optical applications. Dr. N.M. Avram is an Emeritus Professor at the Physics Department, West University of Timisoara, Romania; Dr. M.G. Brik is a Professor at the Institute of Physics, University of Tartu, Estonia.
Download or read book Optical Spectra and Chemical Bonding in Transition Metal Complexes written by Thomas Schönherr and published by Springer. This book was released on 2004-08-19 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Axel Christian Klixbüll Jørgensen was a “Polyhistor”,one of the very few in the highly specialized science of our time.His interests and contributions in ch- istry covered the whole Periodic Table.This statement demonstrates the breadth of his interests,however,it also sheds light on the constraints of chemistry which deals with a large, yet limited number of elements. It is not surprising that Jørgensen went beyond these limits,exploring the probable or plausible ch- istry of yet unknown elements and elementary particles such as quarks. Even chemistry itself did not place rigid limits on his mind,he was able to transfer his chemical concepts to scientific problems far beyond the normal such as in astrophysics. “Structure and Bonding” is intimately associated with the name C.K. J- gensen both as initiator and author over several decades.The appearance of a special edition in memory of this great scientist is a self-evident prolongation of his many contributions to the success of this series.
Download or read book Handbook of Laser Technology and Applications written by Colin Webb and published by CRC Press. This book was released on 2020-09-29 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists and engineers who work with lasers. The Handbook provides, a comprehensive guide to the current status of lasers and laser systems; it is accessible to science or engineering graduates needing no more than standard undergraduate knowledge of optics. Whilst being a self-contained reference work, the Handbook provides extensive references to contemporary work, and is a basis for studying the professional journal literature on the subject. It covers applications through detailed case studies, and is therefore well suited to readers who wish to use it to solve specific problems of their own. The first of the three volumes comprises an introduction to the basic scientific principles of lasers, laser beams and non-linear optics. The second volume describes the mechanisms and operating characteristics of specific types of laser including crystalline solid - state lasers, semiconductor diode lasers, fibre lasers, gas lasers, chemical lasers, dye lasers and many others as well as detailing the optical and electronic components which tailor the laser's performance and beam delivery systems. The third volume is devoted to case studies of applications in a wide range of subjects including materials processing, optical measurement techniques, medicine, telecommunications, data storage, spectroscopy, earth sciences and astronomy, and plasma fusion research. This vast compendium of knowledge on laser science and technology is the work of over 130 international experts, many of whom are recognised as the world leaders in their respective fields. Whether the reader is engaged in the science, technology, industrial or medical applications of lasers or is researching the subject as a manager or investor in technical enterprises they cannot fail to be informed and enlightened by the wide range of information the Handbook supplies.
Download or read book Novel Laser Sources and Applications written by Joseph Frederick Becker and published by SPIE Press. This book was released on 1994 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Photonics written by Mool C. Gupta and published by CRC Press. This book was released on 2018-10-03 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in the field in the ten years since the publication of the first edition, The Handbook of Photonics, Second Edition explores recent advances that have affected this technology. In this new, updated second edition editor Mool Gupta is joined by John Ballato, strengthening the handbook with their combined knowledge and the continued contributions of world-class researchers. New in the Second Edition: Information on optical fiber technology and the economic impact of photonics Coverage of emerging technologies in nanotechnology Sections on optical amplifiers, and polymeric optical materials The book covers photonics materials, devices, and systems, respectively. An introductory chapter, new to this edition, provides an overview of photonics technology, innovation, and economic development. Resting firmly on the foundation set by the first edition, this new edition continues to serve as a source for introductory material and a collection of published data for research and training in this field, making it the reference of first resort.
Download or read book Fiber Optic Fluorescence Thermometry written by K. T. V. Grattan and published by Springer Science & Business Media. This book was released on 1995 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in a single volume the principles, practice and applications of the technology and places it in the context of other recent developments in optical fiber sensor technology. Relevant solid-state physics relating to fluorescent emission is reviewed to aid in materials selection all aspects of sensor design including detector circuit configurations are covered. Cross-referencing of systems with other temperature sensors and comparative evaluations with other sensor types are included.
Download or read book Transition metal Doped Sulfide Selenide and Telluride Laser Crystal and Lasers written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A new class of solid state laser crystals and lasers are formed of transition metal doped sulfide, selenide, and telluride host crystals which have four fold coordinated substitutional sites. The host crystals include II-VI compounds. The host crystal is doped with a transition metal laser ion, e.g., chromium, cobalt or iron. In particular, Cr.sup. 2+ -doped ZnS and ZnSe generate laser action near 2.3 .mu.m. Oxide, chloride, fluoride, bromide and iodide crystals with similar structures can also be used. Important aspects of these laser materials are the tetrahedral site symmetry of the host crystal, low excited state absorption losses and high luminescence efficiency, and the d.sup. 4 and d.sup. 6 electronic configurations of the transition metal ions. The same materials are also useful as saturable absorbers for passive Q-switching applications. The laser materials can be used as gain media in amplifiers and oscillators; these gain media can be incorporated into waveguides and semiconductor lasers.
