Download or read book Fracture Mechanics written by National Symposium on Fracture Mechanics and published by ASTM International. This book was released on 1979 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cryogenic Effects on the Fracture Mechanics Parameters of Ferritic Nickel Alloy Steels written by RL. Tobler and published by . This book was released on 1979 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture toughness (KIc, JIc) and fatigue-crack growth (da/dN) datafor quenched and tempered low-carbon ferritic 3.5Ni and 9Ni steels were measured at temperatures between 295 and 4 K. The tests were performed using 25- and 31-mm-thick compact specimens having fracture planes parallel to the rolling direction (TL orientation). The fracture toughness results for both steels showed qualitatively similar trends: at decreasing temperatures below 295 K, JIc increased by about 20 percent prior to the onset of classical ductile-to-brittle transitions involving cleavage. The transitions occurred between 172 and 100 K for 3.5Ni steel, and between 76 and 4 K for 9Ni steel. Transitional behavior also was evident in the fatigue crack growth behavior. The room-temperature fatigue crack growth rates for these nickel steels are typical of ferritic steels, but the rates at subtransition temperatures are accelerated drastically, in association with cleavage and other brittle cracking modes. Data comparisons between the 3.5Ni and 9Ni steels tested here and other nickel alloy steels are included.

Download or read book Fracture Mechanics written by Thomas A. Cruse and published by ASTM International. This book was released on 1988 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1988 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the National Symposium on Fracture Mechanics written by and published by . This book was released on 1978 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Temperature Fracture Behavior of Iron Nickel Alloy Steels written by RL. Durcholz and published by . This book was released on 1975 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture toughness tests over the interval 298 to 4 K and fatigue crack growth rate tests at 298, 111, and 76 K are reported on selected iron-nickel (Fe-Ni) alloys which are commercially available for potential use in storage or transportation of liquefied natural gas (LNG). These alloys include Fe-6Ni and Fe-5Ni in newly developed three-step heat treatments and Fe-9Ni in the quenched and tempered condition. Linear elastic fracture mechanics parameters (KQ, KIC) and J-integral (JIC) test data are presented for 1.25-in.-thick compact specimens. Discussion includes comparisons of fatigue crack growth rate and fracture data between alloys.

Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering written by K. Timmerhauso and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Cryogenic Materials Conference (ICMC) was held in Boulder, Colorado, in conjunction with the 1977 Cryogenic Engineering Con ference (CEC). Special thanks must be given to the University of Colorado for their skillful hosting of these two conferences. Collaboration between the two con ferences has been mutually beneficial, providing the materials special ist with insight into new applications and design concepts and the cryogenic engineer with exposure to modern materials accomplishments and potentials. The Proceedings of the 1977 Cryogenic Engineering Conference are published in Volume 23 of Advances in Cryogenic Engineering. Both conferences will be held again simul taneously in Madison, Wisconsin, in August 1979. The success and growth of the two International Cryogenic Materials Con ferences have led to the formation of an ICMC Board of Directors. The board members will serve a four-year term and include: Chairman, R. P. Reed (U.S.), R. W. Boom (U.S.), A. F. Clark (U.S.), G. Hartwig (W. Germany), J. W. Morris (U.S.), M. Suenaga (U.S.), K. Tachikawa (Japan), J. Tanaka (Japan), and K. A. Yushchenko (USSR).

Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1979 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Techniques for Low Temperature Measurements written by Jack Ekin and published by Oxford University Press. This book was released on 2006-10-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description

Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering Materials written by K.D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Cryogenic Materials Conference (ICMC) was held on the campus of Massachusetts Institute of Technology in Cambridge in col laboration with the Cryogenic Engineering Conference (CEC) on August 12-16, 1985. The complementary program and the interdependence of these two dis ciplines foster the conference. Its manifest purpose is sharing the latest advances in low temperature materials science and technology. Equally im portant, areas of needed research are identified, prioriti-es for new research are set, and an increased appreciation of interdisciplinary, interlaboratory, and international cooperation ensues. The success of the conference is the result of the. able leadership and hard work of many people: S. Foner of M.I.T. coordinated ICMC efforts as its Conference Chairman. A. I. Braginski of Westinghouse R&D Center planned the program with the assistance of Cochairmen E. N. C. Dalder of Lawrence Livermore National Laboratory, T. P. Orlando of M.I.T., D. O. Welch of Brookhaven National Laboratory, and numerous other committee members. A. M. Dawson of M.I.T., Chairman of Local Arrangements, and G. M. Fitzgerald, Chairman of Special Events, skillfully managed the joint conference. The contributions of the CEC Board, and particularly its conference chairman, J. L. Smith, Jr. of M.I.T., to the organization of the joint conference are also gratefully acknm.ledged.

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources