Download or read book Critical Propulsion Components Volume 3 Exhaust Nozzle written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-28 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/Inlet Acoustic Team. Glenn Research Center NAS3-27235; WBS 22-714-09-47...
Download or read book Critical Propulsion Components written by Gregory M. Buck and published by BiblioGov. This book was released on 2013-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/Inlet Acoustic Team.
Download or read book Critical Propulsion Components Volume 1 Summary Introduction and Propulsion Systems Studies written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-28 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/ Inlet Acoustic Team. Glenn Research Center NAS3-27235; WBS 22-714-09...
Download or read book Critical Propulsion Components written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/ Inlet Acoustic Team.
Download or read book Critical Propulsion Components Volume 4 Inlet and Fan Inlet Accoustics Team written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-15 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/Inlet Acoustic Team. Glenn Research Center NAS3-27235; WBS 22-714-09-47
Download or read book Critical Propulsion Components Volume 2 Combustor written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-27 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several studies have concluded that a supersonic aircraft, if environmentally acceptable and economically viable, could successfully compete in the 21st century marketplace. However, before industry can commit to what is estimated as a 15 to 20 billion dollar investment, several barrier issues must be resolved. In an effort to address these barrier issues, NASA and Industry teamed to form the High-Speed Research (HSR) program. As part of this program, the Critical Propulsion Components (CPC) element was created and assigned the task of developing those propulsion component technologies necessary to: (1) reduce cruise emissions by a factor of 10 and (2) meet the ever-increasing airport noise restrictions with an economically viable propulsion system. The CPC-identified critical components were ultra-low emission combustors, low-noise/high-performance exhaust nozzles, low-noise fans, and stable/high-performance inlets. Propulsion cycle studies (coordinated with NASA Langley Research Center sponsored airplane studies) were conducted throughout this CPC program to help evaluate candidate components and select the best concepts for the more complex and larger scale research efforts. The propulsion cycle and components ultimately selected were a mixed-flow turbofan (MFTF) engine employing a lean, premixed, prevaporized (LPP) combustor coupled to a two-dimensional mixed compression inlet and a two-dimensional mixer/ejector nozzle. Due to the large amount of material presented in this report, it was prepared in four volumes; Volume 1: Summary, Introduction, and Team. Propulsion System Studies, Volume 2: Combustor, Volume 3: Exhaust Nozzle, and Volume 4: Inlet and Fan/Inlet Acoustic Team. Glenn Research Center NAS3-27235; WBS 22-714-09...
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal to Mechanical Energy Conversion Engines and Requirements Volume III written by Oleg N Favorsky and published by EOLSS Publications. This book was released on 2009-11-20 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal to Mechanical Energy Conversion: Engines and Requirements is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Thermal to Mechanical Energy Conversion: Engines and Requirements with contributions from distinguished experts in the field discusses energy. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Aviation Maintenance Technician Handbook Powerplant written by Federal Aviation Administration (FAA)/Aviation Supplies & Academics (ASA) and published by Aviation Supplies & Academics. This book was released on 2012 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new FAA AMT Handbook--Powerplant (Volume 1 and 2) replaces and supersedes Advisory Circular (AC) 65-12A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment. This book was developed as part of a series of handbooks for persons preparing for mechanic certification with airframe or powerplant ratings, or both -- those seeking an Aviation Maintenance Technician (AMT) Certificate, also called an A&P license. An effective text for both students and instructors, this handbook will also serve as an invaluable reference guide for current technicians who wish to improve their knowledge. Powerplant Volume 1: Aircraft Engines, Engine Fuel and Fuel Metering Systems, Induction and Exhaust Systems, Engine Ignition and Electrical Systems, Engine Starting Systems Powerplant Volume 2: Lubrication and Cooling Systems, Propellers, Engine Removal and Replacement, Engine Fire Protection Systems, Engine Maintenance and Operation, Light-Sport Aircraft Engines Includes colored charts, tables, full-color illustrations and photographs throughout, and an extensive glossary and index.
Download or read book Exhaust Nozzles for Propulsion Systems with Emphasis on Supersonic Cruise Aircraft written by Leonard E. Stitt and published by . This book was released on 1990 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Reference Publication written by and published by . This book was released on 1977 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rocket Propulsion Elements written by George P. Sutton and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text on rocket propulsion—now revised to reflect advancements in the field For sixty years, Sutton's Rocket Propulsion Elements has been regarded as the single most authoritative sourcebook on rocket propulsion technology. As with the previous edition, coauthored with Oscar Biblarz, the Eighth Edition of Rocket Propulsion Elements offers a thorough introduction to basic principles of rocket propulsion for guided missiles, space flight, or satellite flight. It describes the physical mechanisms and designs for various types of rockets' and provides an understanding of how rocket propulsion is applied to flying vehicles. Updated and strengthened throughout, the Eighth Edition explores: The fundamentals of rocket propulsion, its essential technologies, and its key design rationale The various types of rocket propulsion systems, physical phenomena, and essential relationships The latest advances in the field such as changes in materials, systems design, propellants, applications, and manufacturing technologies, with a separate new chapter devoted to turbopumps Liquid propellant rocket engines and solid propellant rocket motors, the two most prevalent of the rocket propulsion systems, with in-depth consideration of advances in hybrid rockets and electrical space propulsion Comprehensive and coherently organized, this seminal text guides readers evenhandedly through the complex factors that shape rocket propulsion, with both theory and practical design considerations. Professional engineers in the aerospace and defense industries as well as students in mechanical and aerospace engineering will find this updated classic indispensable for its scope of coverage and utility.
Download or read book Shock Waves written by Klaus Hannemann and published by Springer Science & Business Media. This book was released on 2009-04-01 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 26th International Symposium on Shock Waves in Göttingen, Germany was jointly organised by the German Aerospace Centre DLR and the French-German Research Institute of Saint Louis ISL. The year 2007 marked the 50th anniversary of the Symposium, which first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW26 focused on the following areas: Shock Propagation and Reflection, Detonation and Combustion, Hypersonic Flow, Shock Boundary Layer Interaction, Numerical Methods, Medical, Biological and Industrial Applications, Richtmyer Meshkov Instability, Blast Waves, Chemically Reacting Flows, Diagnostics, Facilities, Flow Visualisation, Ignition, Impact and Compaction, Multiphase Flow, Nozzles Flows, Plasmas and Propulsion. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 26 and individuals interested in these fields.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1979 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Rocket Propulsion written by DP Mishra and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.
