Download or read book Critical Metals Sourcing and Long Supply Chains written by Jody E. Muelaner and published by SAE International. This book was released on 2022-10-17 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve decarbonization through means such as energy-efficient vehicles, active travel, and electrified road freight, solutions must reduce upstream demands on supply chains. However, even taking such a path, the energy transition will massively increase demand for raw materials such as cobalt, nickel, platinum group metals, and rare earth elements. Many of the metals can be largely substituted if required, so they are not truly critical to decarbonization. Critical Metals, Sourcing, and Long Supply Chains: Constraints on Transport Decarbonization discusses how lithium, silver, and copper are much more difficult to replace, and the energy transition is highly likely to depend on them. Greatly increased and more geographically dispersed investments in mineral extraction are vital. Governments must support this by giving investors clear signals about the rate of the transition, geological survey data, accelerated permits, and government backed finance. Public support for sustainable mining should be gained by raising awareness that mineral extraction is critical to combating climate change. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022SE2

Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.

Download or read book Rare Earth and Critical Elements in Ore Deposits written by Philip L. Verplanck and published by . This book was released on 2016 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict Affected and High Risk Areas Third Edition written by OECD and published by OECD Publishing. This book was released on 2016-04-06 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides step-by-step management recommendations endorsed by governments for global responsible supply chains of all minerals, in order for companies to respect human rights and avoid contributing to conflict through their mineral or metal purchasing decisions and practices.

Download or read book Assessing and Strengthening the Manufacturing and Defense Industrial Base and Supply Chain Resiliency of the United States Report to President Trump written by U. S. Military and published by Independently Published. This book was released on 2018-10-06 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent report was released in October 2018. America's manufacturing and defense industrial base ("the industrial base") supports economic prosperity and global competitiveness, and arms the military with capabilities to defend the nation. Currently, the industrial base faces an unprecedented set of challenges: sequestration and uncertainty of government spending; the decline of critical markets and suppliers; unintended consequences of U.S. Government acquisition behavior; aggressive industrial policies of competitor nations; and the loss of vital skills in the domestic workforce. Combined, these challenges - or macro forces - erode the capabilities of the manufacturing and defense industrial base and threaten the Department of Defense's (DoD) ability to be ready for the "fight tonight," and to retool for great power competition. The following report explains the macro forces impacting the industrial base, identifies primary categories of risk, illustrates impacts within sectors, and provides recommendations for mitigation.I. Executive Summary * II. Introduction * III. Methodology * IV. An Overview of America's Manufacturing and Defense Industrial Base * V. Five Macro Forces Driving Risk into America's Industrial Base * VI. Ten Risk Archetypes Threatening America's Manufacturing and Defense Industrial Base * VII. A Blueprint for Action * Appendix One: Executive Order 13806 * Appendix Two: Sector Summaries * Appendix Three: Contributing U.S. Government Agencies * Appendix Four: U.S. Government Sources * Appendix Five: Industry Listening Sessions * Appendix Six: Agreements with Foreign GovernmentsTo provide for our national security, America's manufacturing and defense industrial base must be secure, robust, resilient, and ready. To ensure taxpayer dollars are frugally and wisely spent, the defense industrial base must be cost-effective, cost-efficient, highly productive, and not unduly subsidized. In the event of contingencies, the industrial base must possess sufficient surge capabilities. Above all, America's manufacturing and defense industrial base must support economic prosperity, be globally competitive, and have the capabilities and capacity to rapidly innovate and arm our military with the lethality and dominance necessary to prevail in any conflict.All facets of the manufacturing and defense industrial base are currently under threat, at a time when strategic competitors and revisionist powers appear to be growing in strength and capability.

Download or read book Critical Metals Handbook written by Gus Gunn and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind is using a greater variety of metals in greater quantities than ever before. As a result there is increasing global concern over the long-term availability of secure and adequate supplies of the metals needed by society. Critical metals, which are those of growing economic importance that might be susceptible to future scarcity, are a particular worry. For many of these we have little information on how they are concentrated in the Earth’s crust, how to extract them from their ores, and how to use, recycle and dispose of them effectively and safely. Published with the British Geological Survey, the Critical Metals Handbook brings together a wealth of knowledge on critical metals and provides a foundation for improving the future security and sustainability of critical metal supplies. Written by international experts, it provides a unique source of authoritative information on diverse aspects of the critical metals, including geology, deposits, processing, applications, recycling, environmental issues and markets. It is aimed at a broad non-specialist audience, including professionals and academics working in the exploration and mining sectors, in mining finance and investment, and in mineral processing and manufacturing. It will also be a valuable reference for policy makers concerned with resource management, land-use planning, eco-efficiency, recycling and related fields.

Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.

Download or read book Investigating renewable energy written by and published by R.I.C. Publications. This book was released on 2008 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector written by OECD and published by OECD Publishing. This book was released on 2018-03-07 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector helps enterprises implement the due diligence recommendations contained in the OECD Guidelines for Multinational Enterprises along the garment and footwear supply chain.

Download or read book Decarbonized Power Options for Non road Mobile Machinery written by Jody Emlyn Muelaner and published by SAE International. This book was released on 2023-01-19 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power options for off-road vehicles differ substantially from other commercial vehicles. Battery electrification is suitable for urban construction and light agriculture, but remote mining, forestry, and road building operations will require alternative fuels. Decarbonized Power Options for Non-road Mobile Machinery discusses these domains as well as the potential benefits and challenges of implementing fuels and energy sources such as bioenergy, e-fuels, and alcohol, as well as hydrogen, hydrocarbon, and direct methanol fuel cells. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2023002

Download or read book Achieving the Paris Climate Agreement Goals written by Sven Teske and published by Springer. This book was released on 2019-02-01 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents detailed pathways to achieve 100% renewable energy by 2050, globally and across ten geographical regions. Based on state-of-the-art scenario modelling, it provides the vital missing link between renewable energy targets and the measures needed to achieve them. Bringing together the latest research in climate science, renewable energy technology, employment and resource impacts, the book breaks new ground by covering all the elements essential to achieving the ambitious climate mitigation targets set out in the Paris Climate Agreement. For example, sectoral implementation pathways, with special emphasis on differences between developed and developing countries and regional conditions, provide tools to implement the scenarios globally and domestically. Non-energy greenhouse gas mitigation scenarios define a sustainable pathway for land-use change and the agricultural sector. Furthermore, results of the impact of the scenarios on employment and mineral and resource requirements provide vital insight on economic and resource management implications. The book clearly demonstrates that the goals of the Paris Agreement are achievable and feasible with current technology and are beneficial in economic and employment terms. It is essential reading for anyone with responsibility for implementing renewable energy or climate targets internationally or domestically, including climate policy negotiators, policy-makers at all levels of government, businesses with renewable energy commitments, researchers and the renewable energy industry. Part 2 of this title can be found at this Link: https://link.springer.com/book/10.1007/978-3-030-99177-7

Download or read book The Geopolitics of the Global Energy Transition written by Manfred Hafner and published by Springer Nature. This book was released on 2020-06-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently undergoing an historic energy transition, driven by increasingly stringent decarbonisation policies and rapid advances in low-carbon technologies. The large-scale shift to low-carbon energy is disrupting the global energy system, impacting whole economies, and changing the political dynamics within and between countries. This open access book, written by leading energy scholars, examines the economic and geopolitical implications of the global energy transition, from both regional and thematic perspectives. The first part of the book addresses the geopolitical implications in the world’s main energy-producing and energy-consuming regions, while the second presents in-depth case studies on selected issues, ranging from the geopolitics of renewable energy, to the mineral foundations of the global energy transformation, to governance issues in connection with the changing global energy order. Given its scope, the book will appeal to researchers in energy, climate change and international relations, as well as to professionals working in the energy industry.

Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.

Download or read book Textile Circularity and the Sustainability Model of New Mobility written by Ann Lee-Jeffs and published by SAE International. This book was released on 2024-03-12 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is on a “take-make-waste,” linear-growth economic trajectory where products are bought, used, and then discarded in direct progression with little to no consideration for recycling or reuse. This unsustainable path now requires an urgent call to action for all sectors in the global society: circularity is a must to restore the health of the planet and people. However, carbon-rich textile waste could potentially become a next-generation feedstock, and the mobility sector has the capacity to mobilize ecologically minded designs, supply chains, financing mechanisms, consumer education, cross-sector activation, and more to capitalize on this “new source of carbon.” Activating textile circularity will be one of the biggest business opportunities to drive top- and bottom-line growth for the mobility industry. Textile Circularity and the Sustainability Model of New Mobility provides context and insights on why textiles—a term that not only includes plant-based and animal-based fibers, but plastics as well—are contributing to overflowing landfills, polluted waterways, compromised access to clean water, loss of biodiversity and deforestation, and more. Additionally, it gives an overview of the current state of textile circularity, notable policy and regulatory trends, and how to leverage capabilities of the mobility sector, especially in decarbonization. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2024006

Download or read book Sustainable Supply Chain Management written by Balkan Cetinkaya and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the need to develop sustainable supply chains - economically, environmentally and socially. This book is not about a wish list of impractical choices, but the reality of decisions faced by all those involved in supply chain management today. Our definition of sustainable supply chains is not restricted to so-called "green" supply chains, but recognises that in order to be truly sustainable, supply chains must operate within a realistic financial structure, as well as contribute value to our society. Supply chains are not sustainable unless they are realistically funded and valued. Thus, a real definition of sustainable supply chain management must take account of all relevant economic, social and environmental issues. This book contains examples from a wide range of real-life case studies, and synthesizes the learnings from these many different situations to provide the fundamental building blocks at the centre of successful logistics and supply chain management.

Download or read book Impacts of natural disasters on supply chain performance written by Burkhardt, Mariana and published by KIT Scientific Publishing. This book was released on 2021-02-16 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering the increasing importance of natural disaster events it is inevitable to also focus on their impacts on supply chains as well as their performance impacts on them. The developed approach SCperformND (Supply Chain performance impact assessment of Natural Disasters) demonstrates a methodology to assess those impacts and gives implications for supply chain designs and procurement decisions.

Download or read book The Hidden Cost of Jewelry written by Jo Becker and published by . This book was released on 2018 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: I. Introduction -- II. Existing standards - and why they are not enough -- III. How jewelry companies can source responsibly -- IV. Company rankings and performance -- V. A call to action: next steps fro the jewelry industry -- Acknowledgments -- Annex.