Download or read book Understanding and Mitigating Ageing in Nuclear Power Plants written by Philip G Tipping and published by Elsevier. This book was released on 2010-10-26 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant life management (PLiM) is a methodology focussed on the safety-first management of nuclear power plants over their entire lifetime. It incorporates and builds upon the usual periodic safety reviews and licence renewals as part of an overall framework designed to assist plant operators and regulators in assessing the operating conditions of a nuclear power plant, and establishing the technical and economic requirements for safe, long-term operation.Understanding and mitigating ageing in nuclear power plants critically reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC), along with their relevant analysis and mitigation paths, as well as reactor-type specific PLiM practices. Obsolescence and other less obvious ageing-related aspects in nuclear power plant operation are also examined in depth.Part one introduces the reader to the role of nuclear power in the global energy mix, and the importance and relevance of plant life management for the safety regulation and economics of nuclear power plants. Key ageing degradation mechanisms and their effects in nuclear power plant systems, structures and components are reviewed in part two, along with routes taken to characterise and analyse the ageing of materials and to mitigate or eliminate ageing degradation effects. Part three reviews analysis, monitoring and modelling techniques applicable to the study of nuclear power plant materials, as well as the application of advanced systems, structures and components in nuclear power plants. Finally, Part IV reviews the particular ageing degradation issues, plant designs, and application of plant life management (PLiM) practices in a range of commercial nuclear reactor types.With its distinguished international team of contributors, Understanding and mitigating ageing in nuclear power plants is a standard reference for all nuclear plant designers, operators, and nuclear safety and materials professionals and researchers. - Introduces the reader to the role of nuclear power in the global energy mix - Reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC) - Examines topics including elimination of ageing effects, plant design, and the application of plant life management (PLiM) practices in a range of commercial nuclear reactor types

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Creep in Metallic Materials written by Josef Čadek and published by Elsevier Publishing Company. This book was released on 1988 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The phenomenon of time-dependent plastic deformation of metallic materials under constant load at high temperatures has been documented for at least two centuries and is now termed high temperature creep. A better understanding of creep behaviour of metals and alloys is highly desirable, not only for predictions and thus more efficient exploitation of contemporary creep-resistant metallic materials, but also such an understanding may be of great help in designing new materials and their thermal and mechanical treatment.The aim of this monograph is to provide a comprehensive review of the current status of knowledge of mechanisms of high temperature creep, creep damage and creep fracture in metals and alloys. In the introductory chapters 1-6, the time dependence of creep strain, mechanical equation of state, dislocation motion in creep and dependence of creep rate on temperature, stress and some structure parameters are treated in a traditio

Download or read book Nuclear Energy Basic Principles written by International Atomic Energy Agency and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the rationale and vision for the peaceful use of nuclear energy. The publication identifies the basic principles that nuclear energy systems must satisfy to fulfil their promise of meeting growing global energy demands.

Download or read book Zirconium in the Nuclear Industry written by George P. Sabol and published by ASTM International. This book was released on 1996 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dictionary of United States Army Terms written by United States. War Department and published by . This book was released on 1944 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Download or read book Heavy Water Moderated Power Reactors written by and published by . This book was released on 1958-11 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Zirconium in the Nuclear Industry written by Gerry D. Moan and published by ASTM International. This book was released on 2002 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The 41 papers of this proceedings volume were first presented at the 13th symposium on Zirconium in the Nuclear Industry held in Annecy, France in June of 2001. Many of the papers are devoted to material related issues, corrosion and hydriding behavior, in-reactor studies, and the behavior and properties of Zr alloys used in storing spent fuel. Some papers report on studies of second phase particles, irradiation creep and growth, and material performance during loss of coolant and reactivity initiated accidents. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Download or read book High Performance Materials in Aerospace written by Harvey M. Flower and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace presents an extremely challenging environment for structural materials and the development of new, or improved, materials: processes for material and for component production are the subject of continuous research activity. It is in the nature of high performance materials that the steps of material and of component production should not be considered in isolation from one another. Indeed, in some cases, the very process of material production may also incorporate part or all of the component production itself and, at the very least, will influence the choice of material/component production method to be employed. How ever, the developments currently taking place are to be discovered largely within the confines of specialist conferences or books each dedicated to perhaps a single element of the overall process. In this book contributors, experts drawn from both academia and the aerospace industry, have joined together to combine their individual knowledge to examine high performance aerospace materials in terms of their production, structure, properties and applications. The central interrelationships between the development of structure through the production route and between structure and the properties exhibited in the final component are considered. It is hoped that the book will be of interest to students of aeronautical engineering and of materials science, together with those working within the aerospace industry. Harvey M. Flower Imperial College 1 Design requirements for aerospace structural materials C. J. Peel and P. J. Gregson 1.

Download or read book German Military Abbreviations written by and published by . This book was released on 1943 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Perhaps to a greater extent than any other army, the German Armed Forces employ military abbreviations on their maps and charts, on task force tables of organization, on direction and location sign posts in combat zones, on field orders, and, in short, in every case where abbreviations may possibly be used. These abbreviations are often used in connection with military symbols (see German Military Symbols, January 1943, Military Intelligence Service). A thorough knowledge of both abbreviations and symbols is therefore essential to military personnel engaged in the interpretation of captured documents."--Page 1.

Download or read book Plant Life Management Models for Long Term Operation of Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA Nuclear Energy. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: When nuclear power plants reach the end of their nominal design life, they undergo a special safety review and an ageing assessment of their essential structures, systems and components for the purpose of validating or renewing their licence to operate for terms beyond the service period originally intended. Three different plant life management models have been used to qualify these nuclear power plants to operate beyond their original design life. This publication presents a collection of sample licensing practices for long term operation among IAEA Member States. The various plant life management models used to obtain long term operation authorizations are described and comparisons drawn against the standard periodic safety review model. Lessons learned and warnings about possible complications and pitfalls are also described to minimize the licensing risk during operation and future long term operation applications. The main intention of this publication is to support nuclear power plant owners and operators planning an extension of plant operation beyond its original design life, but it also serves as a useful guide for those interested in procuring, from the beginning, the necessary tools to implement ageing management in their future plant with long term operation in mind.

Download or read book Safety Aspects of Nuclear Power Plants in Human Induced External Events written by International Atomic Energy Agency and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides detailed guidelines for the safety assessment of nuclear power structures against mechanical impact, explosion and fire caused by human induced external events. It covers the characterization of loading, the assessment of structural integrity using both simplified methods and more elaborated methodologies, and the assessment of induced vibration. The acceptance criteria provided in the publication are for different failure modes: overall stability, overall bending and shear, local failure modes and induced vibrations. The process of analysing fire consequences is also included.