Download or read book Fluid Catalytic Cracking Handbook written by Reza Sadeghbeigi and published by Elsevier. This book was released on 2000-06-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated edition of Fluid Catalytic Cracking Handbook provides practical information on the design, operation, troubleshooting, and optimization of fluid catalytic cracking (FCC) facilities. Based on the author's years of field experience, this expanded, second edition covers the latest technologies to improve the profitability and reliability of the FCC units, and provides several "no-to-low-cost" practical recommendations. A new chapter supplies valuable recommendations for debottlenecking and optimizing the performance of cat cracker operations.
Download or read book Fractography microscopic Cracking Processes written by Cedric D. Beachem and published by ASTM International. This book was released on 1976 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Catalytic Cracking Handbook written by Reza Sadeghbeigi and published by Butterworth-Heinemann. This book was released on 2020-04-17 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Catalytic Cracking Handbook: An Expert Guide to the Practical Operation, Design, and Optimization of FCC Units, Fourth Edition, enables readers to maximize the profitability and reliability of fluid catalytic cracking operations by covering all stages of FCC, including their design, operation, troubleshooting and optimization. It includes valuable chapters on FCC Main Fractionator and Gas Plant and Process Engineering Tools that provide engineers with the relevant tools they need to fully optimize processes and operations. This book presents technologies and processes that will improve the profitability and reliability of FCC units, along with lessons from Mr. Sadeghbeigi’s 30 years of field experience. The book provides a valuable reference for experienced engineers, but is also an ideal reference for those who are developing their skills and knowledge base. Presents relevant, real world examples that enable petrochemical engineers to achieve real term savings Contains dedicated chapters on lessons learned from troubleshooting cases carried out by the author Includes sections on FCC Main Fractionator and Gas Plant Covers both SI and Imperial Units throughout
Download or read book Oil Its Conservation and Waste written by James Horatio Westcott and published by . This book was released on 1928 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vapor phase Cracking and Wet Oxidation as Potential Pollutant Control Techniques for Coal Gasification written by and published by . This book was released on 1981 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cracking and Damage written by Z.P. Bazant and published by CRC Press. This book was released on 1989-05-30 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the France-US Workshop on Strain Localization and Size Effect due to Cracking and Damage, Laboratorie de Mecanique et Technologie, Cachan, France, 6-9 September 1988.
Download or read book Ethylene Production via Steam Cracking of Ethane Cost Analysis Ethylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from ethane feedstock using a typical steam cracking process. In this process, ethane is thermally cracked in pyrolysis furnaces through the use of steam. Besides Ethylene, the process also generates a hydrogen-rich gas to be used as fuel. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Chemical and Process Industries written by Osei-Wusu Achaw and published by Springer Nature. This book was released on 2021-08-09 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a thorough overview of chemical and process industries. It describes the standard technologies and the state of the industries and the manufacturing processes of specific chemical and allied products. It includes examples of industries in Ghana, highlighting the real-world applications of these technologies. The book introduces new developments in the processes in chemical industry, focuses on the technology and methodology of the processes and the chemistry underlying them. It offers guidance on operating of processing units. Furthermore, it includes sections on safety and environmental pollution control in industry. With a pedagogical and comprehensive approach, utilizing illustrations and tables, this book provides students in chemical engineering and industrial chemistry with a concise and up-to-date overview of this diverse subject.
Download or read book Fluid Catalytic Cracking VII written by and published by Elsevier. This book was released on 2011-09-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006. Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and metal contaminated oils cracking. Of particular interest has been the introduction of novel concept in process design aimed at improving cracked product selectivity such as two-stage risers for better gasoline and olefins production and downer technology for high severity processes . The importance of solid state nuclear magnetic resonance (NMR) in the study of crude oils, catalysts and reaction products are illustrated by several examples. Two contributions describe the use of predictive methods to understand FCC aging and deactivation and personal overviews of the development of SOx and combustion promoters technology are presented. * Presents findings from the tri-annual international symposium on fluid cracking catalysts (FCC) technology, sponsored by the Petroleum Division of the American Chemical Society (ACS) * Two contributions describe the use of predictive methods to understand FCC aging and deactivation * Personal overviews by the authors of the development of SOx and combustion promoters technology
Download or read book Ethylene Production via Steam Cracking of Isobutane Cost Analysis Ethylene E51A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from isobutane feedstock using a typical steam cracking process. In this process, isobutane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, butadiene , raffinate-1 and pygas as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Cracking of Ethane Propane Cost Analysis Ethylene E21A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production starting from an ethane/propane mixture at a volume ratio of 4:1 A typical steam cracking process with front-end demethanization is employed. In this process, a mix of 80 vol% ethane and 20 vol% propane is thermally cracked in pyrolysis furnaces. In addition to polymer grade Ethylene, the process also generates polymer grade propylene and hydrogen-rich gas. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of n Butane Cost Analysis Ethylene E41A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from n-butane feedstock using a typical steam cracking process In this process, n-butane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, butadiene. Raffinate-1 and pygas as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Survey of Cracking Plants January 1 1928 written by Gordon Ray Hopkins and published by . This book was released on 1928 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motor Fuels written by Eugene Hendricks Leslie and published by . This book was released on 1923 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis in Petrochemical Processes written by M.S. Matar and published by Springer Science & Business Media. This book was released on 1988-12-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of petrochemicals started some years ago with the simple addition reaction of water to propylene for the production of isopropyl alcohol. Currently, the petrochemical industry has become a multi-billion dollar enterprise which encompasses a wide field of chemical products. Almost all the basic organic reactions such as hydrogenation, alkylation, substitution, polymerization, etc. are utilized for the production of these chemicals. It may not, however, have been possible to establish this huge industry without the use of different catalysts. In other words, the great advancements in the catalytic area have supported the vast developments in the petrochemical field. In this book, we have adopted the idea of discussing the petrochemical industry from the point of view of reactants' activities and susceptibilities toward different catalysts. The book is thus classified according to the reaction type. This will eriable students and other users of the book to base their understanding of the petrochemical field on the fundamental principles learned in chemistry. How ever, the first chapter is aimed at establishing some basic facts on the petro chemical industry and its major uses. It discusses, without going into details, the raw materials used, the intermediates and the downstream products. The next eight chapters discuss in some detail the main reactions and the catalysts used for the production of chemicals and polymers from petroleum. The last chapter is devoted to a discussion of some of the practical techniques used in the catalytic field.
Download or read book Stress Corrosion Cracking of Metals A State of the Art written by H. Lee Craig and published by ASTM International. This book was released on 1983-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 1923 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
