Download or read book Special Applications and Advanced Techniques for Crack Size Determination written by John J. Ruschau and published by ASTM International. This book was released on 1995 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprises ten papers discussing topics including methods for the measurement of surface crack size, multiple site cracking, and cracking under nonisothermal conditions using AC potential difference procedures; influences of crack deflection and crack splitting on DC potential calibrations; complianc

Download or read book Small crack Test Methods written by James M. Larsen and published by ASTM International. This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the most recent methods for testing small cracks in a variety of materials, providing detailed quantitative information on necessary procedures for data acquisition. Emphasizes the characterization of small, three-dimensional fatigue cracks, initiated either naturally or artificially. The ei

Download or read book Fatigue and Fracture of Weldments written by Uwe Zerbst and published by Springer. This book was released on 2018-12-11 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and thorough guide to those readers who are lost in the often-confusing context of weld fatigue. It presents straightforward information on the fracture mechanics and material background of weld fatigue, starting with fatigue crack initiation and short cracks, before moving on to long cracks, crack closure, crack growth and threshold, residual stress, stress concentration, the stress intensity factor, J-integral, multiple cracks, weld geometries and defects, microstructural parameters including HAZ, and cyclic stress-strain behavior. The book treats all of these essential and mutually interacting parameters using a unique form of analysis.

Download or read book Shallow Crack Fracture Mechanics Toughness Tests and Applications written by Michael Graham Dawes and published by Woodhead Publishing. This book was released on 1992-01-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last decade there has been an increasing awareness that use of standards deeply notched fracture mechanics test specimens can result in substantial over-or-under-assessments of the real fracture toughness associated with shallow surface cracks.

Download or read book Proceedings of Crack Paths CP 2009 Vicenza Italy 2009 written by and published by Gruppo Italiano Frattura. This book was released on with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fracture Mechanics of Metals Composites Welds and Bolted Joints written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2001 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware to perform a given mission in a fluctuating load environment, there are several factors that the designer should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must withstand the environment in question without failure. Therefore, a comprehensive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. Engineers must also consider the feasibility of fabricating the structural hardware in the material selection process. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems in which the survivability of structure containing pre-existing flaws is of great interest. These problems include structural failures resulting from cracks that are inherent in the material, or defects that are introduced in the part due to improper handling or rough machining, that must be assessed through fracture mechanics concepts.

Download or read book Fracture Kinetics of Crack Growth written by A.S. Krausz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years, we have made numerous presentations, delivered several series of lectures, and participated in many discussions on the processes of time-dependent crack growth. We felt that the understanding of these processes had reached a degree of maturity: the basic physical principles were established and their application to engineering practice was now feasible. We concluded that the best way to organize this knowledge was to write it up in a single, coherent system. Martinus Nijhoff kindly encouraged us and generously offered their collaboration. Hence, this book. The physical process of time-dependent subcritical crack growth is rigorously defined by statistical mechanics. If well presented, the principles can be readily understood by practitioners of fracture research and design engineers. We present the physical processes of crack growth in terms of atomic interactions that assume only a working knowledge of the standard engineering materials course contents. From this, we develop a framework that is valid for any type of material, be it metallic, polymeric, ceramic, glass or mineral - indeed, any solid. We also assume an elementary exposure to fracture mechanics. An appendix is provided that outlines those aspects of fracture mechanics that are needed for an introduction to fracture kinetics analyses; it also provides a common ground for concepts and terminology (see Appendix A). We proceed through theory to applications that are of interest in research, development and design, as well as in test and operating engineering practice.

Download or read book Threshold Fatigue Crack Growth Behavior written by F. K. Haake and published by . This book was released on 1989 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of Crack Paths CP 2006 Parma Italy 2006 written by and published by Gruppo Italiano Frattura. This book was released on with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plane Strain Crack Toughness Testing of High Strength Metallic Materials written by and published by ASTM International. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Crack Growth Thresholds Endurance Limits and Design written by J. C. Newman and published by ASTM International. This book was released on 2000 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Contains 24 papers from the November, 1998 symposium of the same name, sponsored by the ASTM Committee E8 on Fatigue and Fracture, and presented by Newman and Piascik (both of the NASA Langley Research Center). The papers focus on such areas as fatigue-crack growth threshold mechanisms, loading and specimen-type effects, analyses of fatigue-crack-growth-threshold behavior, and applications of threshold concepts and endurance limits to aerospace and structural materials. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book The Effects of Slip Character and Crack Closure on the Growth of Small Fatigue Cracks in Titanium aluminium Alloys written by James M. Larsen and published by . This book was released on 1990 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation was performed to study the effects of slip character and crack closure on the propagation of small fatigue cracks in titanium- aluminum alloys. The materials examined were solution-treated Ti-4Al and Ti-8Al, as well as aged Ti-8Al. The propagation of naturally initiated surface cracks of depths as small as 25 micrometers was compared with the behavior of large through-thickness cracks. An extensometer was used to monitor crack closure throughout the large crack tests, and the closure behavior of the small cracks was measured using a computerized laser interferometric displacement gage having a displacement resolution of 0.01 micrometer. The measurements of crack closure were used to compute an effective stress intensity factor range. In all three alloys and for all test conditions, which included a range of stress levels and stress ratios, small cracks propagated faster than large cracks subjected to an equivalent Delta K, and the small cracks propagated under conditions that were significantly below the large-crack threshold, Delta K(th). Although the character and distribution of slip in Ti-Al alloys may have a dramatic influence on fatigue crack initiation and on the propagation of large cracks, this effect was minimal for small cracks.

Download or read book Proceedings of Crack Paths CP 2012 Gaeta Italy 2012 written by and published by Gruppo Italiano Frattura. This book was released on 2012-09-19 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Crack Growth Measurement and Data Analysis written by S. J. Hudak and published by ASTM International. This book was released on 1981 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Part Through Crack Fatigue Life Prediction written by J. B. Chang and published by ASTM International. This book was released on 1979 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fracture Mechanics written by John D. Landes and published by ASTM International. This book was released on 1994 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crack Dynamics in Metallic Materials written by J.R. Klepaczko and published by Springer. This book was released on 2014-05-04 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an up-to-date knowledge on theory and experimental results of rate-dependent fracture processes in metallic materials. The objective is to expose the current status of a growing branch of fracture mechanics called generally "Dynamic Fracture". Crack dynamics takes into account not only the effects of inertia but also rate sensitivity of a material under consideration. This volume has been prepared by four leading authorities in fracture dynamics: D.R. Curran, J.F. Kalthoff, J.R. Klepaczko and F. Nilsson. A broad range of problem is covered: dynamic fracture theory, application of dynamic fracture mechanics, dynamic crack inition and microstatistical fracture mechanics in dynamic fracture. The book in its present format may serve as a text supplement in lecturing on fracture mechanics. On the other hand, it may serve as an instructional aid in engineering of fracture prevention.