Download or read book Coupling Power Generation with Syngas Based Chemical Synthesis written by Clemens Forman and published by Springer. This book was released on 2018-06-13 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coupling power generation with syngas-based chemical synthesis according to the so-called ‘Polygeneration-Annex’ concept offers economic and technical benefits. Clemens Forman assesses the integration of incoming streams by the Annex plant from a power plant point of view across its full load range. Analyses are done by load-dependent flowsheet simulation. The pulverized lignite combustion power plant process is covered by two generic technical states: an existing 650 MW(el) power plant and a near future 1,100 MW(el) power plant with duo block design and dry lignite co-firing. Modeling comprises both the flue gas path and the water-steam circuit. Appropriate stream interfaces are identified and determined depending on the load status. The technical feasibility of integration can be proven.
Download or read book Process Chain Evaluation for Coupling Power Generation with Syngas based Chemical Synthesis written by Clemens Forman and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis Gas written by James G. Speight and published by John Wiley & Sons. This book was released on 2020-06-10 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a follow-up to the Handbook of Gasification Technology, also from Wiley-Scrivener, Synthesis Gas goes into more depth on how the products from this important technology can reduce our global carbon footprint and lead the United States, and other countries, toward energy independence. The environmental benefits are very high, and, along with carbon capture and renewable fuels, synthesis gas (or syngas) is a huge step toward environmental sustainability. Synthesis gas is one of the most important advancements that has ever occurred in energy production. Using this technology, for example, coal, biomass, waste products, or a combination of two or more of these can be gasified into a product that has roughly half the carbon footprint of coal alone. Used on a massive scale, just think of the potential for reducing carbon emissions! Synthesis Gas covers all aspects of the technology, from the chemistry, processes, and production, to the products, feedstocks, and even safety in the plant. Whether a veteran engineer or scientist using it as a reference or a professor using it as a textbook, this outstanding new volume is a must-have for any library.
Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Products and Usage considers the applications and usages of syngas for producing different chemical materials such as hydrogen, methanol, ethanol, methane, ammonia, and more. In addition, power generation in fuel cells, or in combination with heat from syngas, as well as iron reduction with economic and environmental challenges for syngas utilization are described in detail. - Introduces syngas characteristics and its properties - Describes various methods and technologies for producing syngas - Discusses syngas production from different roots and feedstocks
Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. - Introduces syngas characteristics and its properties - Describes various methods and technologies for producing syngas - Discusses syngas production from different roots and feedstocks
Download or read book Syngas from Waste written by Luis Puigjaner and published by Springer Science & Business Media. This book was released on 2011-07-15 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Syngas from Waste presents the most recent concepts, methods and techniques for the preliminary design of a promising emerging technology: production of clean syngas from waste materials. An in-depth account is given of the steps necessary to achieve the optimum design and up-to-date tools are presented to support the designer’s decision-making tasks: modelling, simulation and optimization. Numerous illustrations and tables are included to facilitate the reader’s understanding, as well as suggestions for further reading. The text is complemented with practical examples and industrial applications ranging from clean power generation to complex combined heat and power systems and high purity hydrogen for use in fuel cells. Syngas from Waste contains high-quality contributions from leading experts in the field. It is intended for academics at MSc or PhD level, researchers and industry practitioners in syngas production and applications, who are involved in the design, retrofit design and evaluation activities of alternative scenarios. It contains valuable teaching material for lecturers and provides industry professionals with the know-how to evaluate and improve existing installations or even to design a new one.
Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Purification and Separation considers different common and novel processes for the purification of produced syngas, such as absorption, adsorption, membrane, cryogenic distillation and particulate separation technologies in addition to thermal and oxidative processes for tar removal. The role of various catalysts or materials in absorption, adsorption and membrane processes are discussed in separate chapters to address each in more detail. - Introduces various adsorption and absorption techniques for purifying syngas - Describes syngas purification by various membranes - Discusses novel technologies for syngas purification
Download or read book Optimization in the Energy Industry written by Josef Kallrath and published by Springer Science & Business Media. This book was released on 2008-12-25 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad, in-depth overview that reflects the requirements, possibilities and limits of mathematical optimization and, especially, stochastic optimization in the energy industry.
Download or read book Membrane Reactors for Energy Applications and Basic Chemical Production written by Angelo Basile and published by Elsevier. This book was released on 2015-02-05 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Reactors for Energy Applications and Basic Chemical Production presents a discussion of the increasing interest in membrane reactors that has emerged in recent years from both the scientific and industrial communities, in particular their usage for energy applications and basic chemical production. Part One of the text investigates membrane reactors for syngas and hydrogen production, while Part Two examines membrane reactors for other energy applications, including biodiesel and bioethanol production. The final section of the book reviews the use of membrane reactors in basic chemical production, including discussions of the use of MRs in ammonia production and the dehydrogenation of alkanes to alkenes. - Provides comprehensive coverage of membrane reactors as presented by a world-renowned team of experts - Includes discussions of the use of membrane reactors in ammonia production and the dehydrogenation of alkanes to alkenes - Tackles the use of membrane reactors in syngas, hydrogen, and basic chemical production - Keen focus placed on the industry, particularly in the use of membrane reactor technologies in energy
Download or read book Syngas Production Status and Potential for Implementation in Russian Industry written by Vladimir Litvinenko and published by Springer. This book was released on 2017-11-03 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the assessment of different coal gasification technologies for the utilization of Russian coals with analyses of economically feasible process chains for preparation of marketable products from high-ash coals. The work presented is important in view of the general competitiveness that marks the future of coal in the world. As the cheapest form of fuel (in comparable terms) coal will undoubtedly be in demand resources in the world. The book consists of parts which include an overview about the major coal characteristics, detailed discussion of fundamental aspects of gasification technologies and gasifiers, an introduction into annex concepts, an overview about different technologies of syngas utilization, technical and economic assessment of several coal-to-liquid and coal-to-chemicals routes, and feasibility demonstration for selected process chains. This book is addressed to the management and engineers of Russian coal companies and scientific staff of Russian research institutions working in the field of coal utilization.
Download or read book Advances in Power to X Processes Systems and Deployment written by Valerie Eveloy and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Carbon Management Technologies written by Subhas Sikdar and published by CRC Press. This book was released on 2020-03-19 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Management Technologies comprises 43 chapters contributed by experts from all over the world. Volume 1 of the book, containing 23 chapters, discusses the status of technologies capable of yielding substantial reduction of carbon dioxide emissions from major combustion sources. Such technologies include renewable energy sources that can replace fossil fuels and technologies to capture CO2 after fossil fuel combustion or directly from the atmosphere, with subsequent permanent long-term storage. The introductory chapter emphasizes the gravity of the issues related to greenhouse gas emissionglobal temperature correlation, the state of the art of key technologies and the necessary emission reductions needed to meet international warming targets. Section 1 deals with global challenges associated with key fossil fuel mitigation technologies, including removing CO2 from the atmosphere, and emission measurements. Section 2 presents technological choices for coal, petroleum, and natural gas for the purpose of reducing carbon footprints associated with the utilization of such fuels. Section 3 deals with promising contributions of alternatives to fossil fuels, such as hydropower, nuclear, solar photovoltaics, and wind. Chapter 19 of this book is freely available as a downloadable Open Access PDF at http://www.taylorfrancis.com under a Creative Commons Attribution-Non Commercial-No Derivatives (CC-BY-NC-ND) 4.0 license.
Download or read book Energy and Chemical Engineering Outcomes from the EFCE Energy Section in the 12th European Congress on Chemical Engineering ECCE12 written by Francois M. A. Marechal and published by Frontiers Media SA. This book was released on 2021-07-21 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Sources written by Balasubramanian Viswanathan and published by Newnes. This book was released on 2016-08-24 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Sources: Fundamentals of Chemical Conversion Processes and Applications provides the latest information on energy and the environment, the two main concerns of any progressive society that hopes to be sustainable in the future. Continuous efforts have to be exercised in both these areas by any of the developing communities, as concern over energy conversion continues to evolve due to various ecological imbalances, including climate change. This book provides the fundamentals behind all energy conversion processes, identifies future research needs, and discusses the potential application of each process in a clear-and-concise manner. It is a valuable source for both chemists and chemical engineers who are working to improve current and developing future energy sources, and is a single reference that deals with almost all energy sources for these purposes, reviewing the fundamentals, comparing the various processes, and suggesting future research directions. - Compiles, in a single source, all energy conversion processes, enabling easy evaluation and selection - Explains the science behind each conversion process and facilitates understanding - Contains many illustrations, diagrams, and tables, enabling a clear and comprehensible understanding of the pros and cons of the various processes - Includes an exhaustive glossary of all terms used in the conversion processes - Presents current status and new direction, thus enabling the planning process for future research needs - Provides a concise and comprehensive overview of all energy sources
Download or read book Whole Energy Systems written by Vahid Vahidinasab and published by Springer Nature. This book was released on 2022-02-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the concept of whole energy systems and the role of vector-coupling technologies (VCTs) in meeting long-term decarbonization strategies. It is the first comprehensive reference that provides basic definitions and fundamental, applicable approaches to whole energy systems analysis and vector-coupling technologies in a multidisciplinary way. Whole Energy Systems presents practical methods with evidence from applications to real-world and simulated coupled energy systems. Sample analytical examples are provided to aid in the understanding of the presented methods. The book will provide researchers and industry stakeholders focused on whole energy systems, as well researchers and developers from different branches of engineering, energy, economics, and operation research, with state-of-the-art coverage and the latest developments in the field.
Download or read book Renewable Energy and Climate Change written by Dipankar Deb and published by Springer Nature. This book was released on 2019-09-03 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the First International Conference on Renewable Energy and Climate Change (REC 2019), which was held at the Institute of Infrastructure Technology Research and Management (IITRAM) from 1 to 2 February 2019. The topics covered include renewable (green) energy and sources including wind power, hydropower, solar energy, biomass, biofuel, geothermal energy, wave energy, tidal energy, hydrogen & fuel cells, energy storage, new trends and technologies for renewable energies, policies and strategies for renewable energies, smart grids, batteries, and e-mobility, control techniques for renewable energies, hybrid renewable energies, renewable energy research and applications for industries, applications of renewable energies in electrical vehicles and other allied areas, artificial intelligence and machine learning studies for renewable energies, renewable energy systems in smart cities, climate change mitigation, carbon trading, carbon capture and utilization, and carbon dioxide refrigeration systems.
Download or read book New Dimensions in Production and Utilization of Hydrogen written by Sonil Nanda and published by Elsevier. This book was released on 2020-08-11 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gradual increase of population and the consequential rise in the energy demands in the recent years have led to the overwhelming use of fossil fuels. Hydrogen has recently gained substantial interest because of its outstanding features to be used as clean energy carrier and energy vector. Moreover, hydrogen appears to be an effective alternative to tackle the issues of energy security and greenhouse gas emissions given that it is widely recognized as a clean fuel with high energy capacity. Hydrogen can be produced by various techniques such as thermochemical, hydrothermal, electrochemical, electrolytic, biological and photocatalytic methods as well as hybrid systems. New Dimensions in Production and Utilization of Hydrogen emphasizes on the research, development and innovations in the production and utilization of hydrogen in the industrial biorefining, hydrotreating and hydrogenation technologies, fuel cells, aerospace sector, pharmaceuticals, metallurgy, as well as bio-oil upgrading. Moreover, the supply chain analysis, lifecycle assessment, techno-economic analysis, as well as strengths and threats of global hydrogen market are covered in the book. This book provides many significant insights and scientific findings of key technologies for hydrogen production, storage and emerging applications. The book serves as a reference material for chemical and biochemical engineers, mechanical engineers, physicists, chemists, biologists, biomedical scientists and scholars working in the field of sustainable energy and materials. - Discusses the efficient usage of hydrogen as standalone fuel or feedstock in downstream processing - Outlines key technologies for hydrogen production and their emerging applications - Includes innovative approaches to the research and applications of hydrogen, including hydrotreating technologies, fuel cell vehicles and green fuel synthesis, the aerospace sector, pharmaceuticals, carbon dioxide hydrogenation, and bio-oils upgrading - Serves as a reference for chemical, biochemical, and mechanical engineers, physicists, chemists, biologists, and biomedical scientists working in sustainable energy and materials
