Download or read book Cost of Removing Formaldehyde in Dilute Solutions and Glyphosate from Water with Aeration Columns written by Robert E. Selleck and published by . This book was released on 1988 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.
Download or read book Advanced Oxidation Processes for Water Treatment written by Mihaela I. Stefan and published by IWA Publishing. This book was released on 2017-09-15 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Oxidation Processes (AOPs) rely on the efficient generation of reactive radical species and are increasingly attractive options for water remediation from a wide variety of organic micropollutants of human health and/or environmental concern. Advanced Oxidation Processes for Water Treatment covers the key advanced oxidation processes developed for chemical contaminant destruction in polluted water sources, some of which have been implemented successfully at water treatment plants around the world. The book is structured in two sections; the first part is dedicated to the most relevant AOPs, whereas the topics covered in the second section include the photochemistry of chemical contaminants in the aquatic environment, advanced water treatment for water reuse, implementation of advanced treatment processes for drinking water production at a state-of-the art water treatment plant in Europe, advanced treatment of municipal and industrial wastewater, and green technologies for water remediation. The advanced oxidation processes discussed in the book cover the following aspects: - Process principles including the most recent scientific findings and interpretation. - Classes of compounds suitable to AOP treatment and examples of reaction mechanisms. - Chemical and photochemical degradation kinetics and modelling. - Water quality impact on process performance and practical considerations on process parameter selection criteria. - Process limitations and byproduct formation and strategies to mitigate any potential adverse effects on the treated water quality. - AOP equipment design and economics considerations. - Research studies and outcomes. - Case studies relevant to process implementation to water treatment. - Commercial applications. - Future research needs. Advanced Oxidation Processes for Water Treatment presents the most recent scientific and technological achievements in process understanding and implementation, and addresses to anyone interested in water remediation, including water industry professionals, consulting engineers, regulators, academics, students. Editor: Mihaela I. Stefan - Trojan Technologies - Canada
Download or read book Drinking Water Quality written by N. F. Gray and published by Cambridge University Press. This book was released on 2008-04-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive review of the problems associated with the supply of drinking water in the developed world. Since the first edition of this book was published, water companies and regulators have been presented with numerous new challenges - global warming has seriously affected water supplies and water quality; advances in chemical and microbial analysis have revealed many new contaminants in water that were previously undetectable; and recent terrorist attacks have demonstrated how vulnerable water supplies are to contamination or disruption. This new edition includes an overview of the current and emerging problems, with potential solutions. It has been completely updated, and includes the WHO Revised Drinking Water Guidelines. An ideal textbook for courses in environmental science, hydrology, environmental health and environmental engineering; it also provides an authoritative reference for practitioners and professionals in the water supply industry.
Download or read book Riverbank Filtration written by C. Ray and published by Springer Science & Business Media. This book was released on 2006-03-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chittaranjan Ray, Ph. D. , P. E. University of Hawaii at Mãnoa Honolulu, Hawaii, United States Jürgen Schubert, M. Sc. Stadtwerke Düsseldorf AG Düsseldorf, Germany Ronald B. Linsky National Water Research Institute Fountain Valley, California, United States Gina Melin National Water Research Institute Fountain Valley, California, United States 1. What is Riverbank Filtration? The purpose ofthis book is to show that riverbank filtration (RBF) isa low-cost and efficient alternative water treatment for drinking-water applications. There are two immediate benefits to the increased use of RBF: Minimized need for adding chemicals like disinfectants and coagulants to surface water to control pathogens. Decreased costs to the community without increased risk to human health. Butwhat,exactly, isRBF? In humid regions, river water naturally percolates through the ground into aquifers (which are layers of sand and gravel that contain water underground) during high-flow conditions. In arid regions, most rivers lose flow, and the percolating water passes through soil and aquifer material until it reaches the water table. During these percolation processes, potential contaminants present in river water are filtered and attenuated. If there are no other contaminants present in the aquifer or ifthe respective contaminants are present at lower concentrations, the quality of water in the aquifer can be ofhigher quality than that found in theriver. In RBF, production wells — which are placed near the banks ofrivers —pump large quantities ofwater.
Download or read book Organic Pollutants in the Water Cycle written by Thorsten Reemtsma and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first in-depth and comprehensive reference on the most pertinent polar contaminant classes and their behavior in the whole water cycle includes, among others, industrial chemicals, consumer products, polar herbicides and pharmaceuticals. All chapters are uniformly structured, covering properties, pollution sources, occurrence in wastewater, surface water, and groundwater as well as water treatment aspects, while ecotoxicological and assessment aspects are also covered. Among the authors are leading experts in their relevant fields, many of whom provide here groundbreaking research results. The result is an up-to-date information source for researchers and professionals working in water quality monitoring, water supply, or wastewater treatment, as well as environmental and water chemists, geochemists, ecologists, chemists and engineers.
Download or read book Chemical Safety of Drinking water written by Terrence Thompson and published by WHO. This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination of drinking-water is a significant concern for public health throughout the world. Microbial hazards make the largest contribution to waterborne disease in developed and developing countries. Nevertheless, chemicals in water supplies can cause serious health problems--whether the chemicals are naturally occurring or derive from sources of pollution. At a global scale, fluoride and arsenic are the most significant chemicals, each affecting perhaps millions of people. However, many other chemicals can be important contaminants of drinking-water under specific local conditions. Often, identification and assessment of risks to health from drinking-water relies excessively on analysis of water samples. The limitations of this approach are well recognized, and contributed to the delay in recognizing arsenic in drinking-water as a significant health concern in Bangladesh and elsewhere. To overcome such limitations, the latest edition of the World Health Organization (WHO) Guidelines for Drinking-water Quality (WHO, 2004; WHO,2006) emphasizes effective preventive management through a 'framework for drinking-water safety' that incorporates 'water safety plans.' Effective preventive management of chemicals in drinking-water requires simple tools for distinguishing the few chemicals of potential local or national concern from the unmanageably long list of chemicals of possible significance. The aim is to identify and prioritize the chemicals of concern, to overcome the limitations of direct analysis of water quality, and ensure that limited resources are allocated towards the monitoring, assessment and control of the chemicals that pose the greatest health risks. Identifying and prioritizing chemical risks presents a challenge, especially in developing countries, because information on the presence of chemicals in water supplies is often lacking. This document provides guidance to help readers to meet that challenge. It shows how information on aspects such as geology and industrial and agricultural development, which is often readily available, can be used to identify potential chemical contaminants (and potential sources of chemicals), from catchment to consumer, and thus prioritize risks. As a supporting document to the Guidelines for Drinking-water Quality (WHO, 2004; WHO, 2006), this publication is aimed at policy-makers, regulators, managers and public health practitioners at national and local level. It is divided into three parts: Part A provides general guidance on using limited information in prioritizing chemicals in drinking-water for risk management. The need for such guidance is outlined in Chapter 1,which also describes the administrative and policy context. Chapter 2 describes the principles applied in prioritizing chemicals, provides information on some factors that affect chemical concentrations along pathways, and highlights several specific chemicals that are frequently considered priorities because of their widespread occurrence or significant health effects. Chapter 3 discusses the role of drinking-water standards and guidelines, and provides an overview of contemporary water quality management procedures. Part B provides practical guidance on identifying specific chemicals that are likely to be of concern in individual water supply systems. It groups chemical contaminants into five categories on the basis of their potential sources: naturally occurring, from agriculture activities, from human settlements, from industrial activities, and from water treatment and distribution processes themselves. Part C comprises the appendices. It includes guidance on the most likely sources of potential contaminants and on identifying chemicals that could be of concern in particular circumstances. The appendices address potential sources of chemicals considered in the WHO drinking-water guidelines (WHO, 2004; WHO, 2006), chemicals potentially discharged in effluents from industrial sources, and the association of pesticides with crops and crop types. This information is presented in an accessible format that will help users to determine the chemical hazards that can arise in the catchment, in treatment and in distribution, in large, medium and small water supplies. Many experts worldwide contributed to this work over a period of several years, beginning with the 1st Meeting of Experts on Monitoring Chemicals in Drinking Water, held in Bangkok, Thailand, in January 2001. This was followed by the 2nd Meeting of Experts on Monitoring Chemicals in Drinking Water, also held in Bangkok, in December 2001. Both meetings were sponsored by WHO and hosted by the Department of Health, Ministry of Public Health, Thailand. The draft guidance document was subsequently tested in a series of field trials in 2002-2003 in Indonesia, Fiji, Nepal, Mongolia, the Philippines and Thailand. Lessons learnt through the field trials provided feedback that was valuable in revising and finalizing the document. Readers should note that while this publication has been developed as a supporting document for, and with reference to, the Guidelines for Drinking-water Quality, the guidelines themselves are frequently updated and the latest information should always be sought by reference to relevant World Health Organization publications and web site. (http://www.who.int/water_sanitation_health/dwq/guidelines/en/index.html).
Download or read book Chemistry of Water Treatment Second Edition written by Samuel D. Faust and published by CRC Press. This book was released on 1998-07-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.
Download or read book Conserving Bogs written by Rob E. Stoneman and published by Stationery Office Books (TSO). This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bogs are fascinating landscapes for ecologists, climatologists, archaeologists, environmental historians and water managers. But many bogs have been damaged, and legislative protection - as 29 case studies demonstrate - is not enough to conserve the rest.
Download or read book In Situ Treatment of Hazardous Waste contaminated Soils written by and published by Noyes Publications. This book was released on 1991-01-01 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: State of the art information on in situ treatment technologies for hazardous waste-contaminated soils is presented. Describes for each technology: wastes amenable to treatment, ease of application, potential level of treatment available, reliability, secondary impacts and equipment and reagents required.
Download or read book Handbook of Environmental Analysis written by Pradyot Patnaik and published by CRC Press. This book was released on 2017-08-23 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook will cover all aspects of environmental analysis and will examine the emergence of many new classes of pollutants in recent years. It will provide information on an array of topics from instrumentation, analytical techniques, and sample preparations to statistical calculations, chemical structures, and equations. It will present the tools and techniques required to measure a wide range of toxic pollutants in our environment. It will be fully revised throughout, and will add four new chapters (Microbial Analysis, Chlorophyll, Chlorine, Chloramines and Chlorine Dioxide, and Derivatization Reactions in Environmental Analysis).
Download or read book Principles and Practices of Rice Production written by Surajit K. De Datta and published by Int. Rice Res. Inst.. This book was released on 1981 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book WHO Recommended Classification of Pesticides by Hazard and Guidelines to Classification 2009 written by International Program on Chemical Safety and published by World Health Organization. This book was released on 2010 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The WHO Recommended Classification of Pesticides by Hazard was approved by the 28th World Health Assembly in 1975 and has since gained wide acceptance. When it was published in the WHO Chronicle, 29, 397-401 (1975), an annex, which was not part of the Classification, illustrated its use by listing examples of classification of some pesticidal active ingredients and their formulations. Later suggestions were made by Member States and pesticide registration authorities that further guidance should be given on the classification of individual pesticides. Guidelines were first issued in 1978, and have since been revised and reissued every few years. Up until the present revision the original guidelines approved by the World Health Assembly in 1975 have been followed without amendment. In December, 2002 the United Nations Committee of Experts on the Transport of Dangerous Goods and on the Globally Harmonized System of Classification and Labelling of Chemicals (UNCETDG/GHS) approved a document called 'The Globally Harmonized System of Classification and Labelling of Chemicals' with the intent to provide a globally-harmonized system1 (GHS) to address classification of chemicals, labels, and safety data sheets. The GHS (with subsequent revisions) is now being widely used for the classification and labeling of chemicals worldwide. For this revision of the Classification the WHO Hazard Classes have been aligned in an appropriate way with the GHS Acute Toxicity Hazard Categories for acute oral or dermal toxicity as the starting point for allocating pesticides to a WHO Hazard Class (with adjustments for individual pesticides where required). It is anticipated that few of the more toxic pesticides will change WHO Hazard Class as a result of this change. As has always been the case, the classification of some pesticides has been adjusted to take account of severe hazards to health other than acute toxicity (as described in Part II). The GHS Acute Toxicity Hazard Category for each pesticide is now presented alongside the existing information"--Page 1.
Download or read book Organic Micropollutants in the Aquatic Environment written by G. Angeletti and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 10 years after the "First European Symposium on Organic Micropollutants in the Aquatic Environment", the "Sixth Symposium" was held in Lisbon (Portugal) from 22 to 24 May 1990. The Symposium was organised within the framework of the Concerted Action COST 641 * which is included in the Fourth R&D Programme on the Environment of the Commission of the European Communities expiring at the end of 1990. After restructuring the Concerted Action in 1984, particular attention has been devoted to fate and transformation of organic micropollutants in the aquatic environment. Therefore, a major aim of the Symposium was to review current studies and progress in these areas, besides more general aspects related to analytical methodologies and behaviour of pollutants during water treatment processes. This volume contains the plenary papers presented in the following sessions at the Symposium: - Multidisciplinary studies - Partitioning of organic micropollutants in the aquatic environment - Novel analytical techniques in environmental chemistry - Monitoring micropollutant - Degradation of organic micropollutants during field conditions - Reclamation of polluted ground water - Chemical and photochemical oxidation - Future of environmental chemistry. In addition, extended versions of posters are included, covering the four topics which are dealt within the four Working Parties forming the structure of the Concerted Action: 1. Analytical methodologies 2. Transport and distribution 3. Transformation reactions 4. Water treatment. We believe that the Proceedings give a good overview of current activities in these fields of research in Europe.
Download or read book EPA 560 6 written by and published by . This book was released on 1976-02 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
Download or read book Chemistry of Advanced Environmental Purification Processes of Water written by Erik Sogaard and published by Newnes. This book was released on 2014-04-11 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Advanced Environmental Purification Processes of Water covers the fundamentals behind a broad spectrum of advanced purification processes for various types of water, showing numerous applications through worked examples. Purification processes for groundwater, soil water, reusable water, and raw water are examined where they are in use full-scale, as a pilot approach, or in the laboratory. This book also describes the production of ceramic particles (nanochemistry) and materials for the creation of filtration systems and catalysts that are involved. - Uses chemistry fundamentals to explain the mechanisms behind the various purification processes - Explains in detail process equipment and technical applications - Describes the production of ceramic particles and other new materials applicable to filtration systems - Includes worked examples
