Download or read book Asynchronous On Chip Networks and Fault Tolerant Techniques written by Wei Song and published by CRC Press. This book was released on 2022-05-10 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asynchronous On-Chip Networks and Fault-Tolerant Techniques is the first comprehensive study of fault-tolerance and fault-caused deadlock effects in asynchronous on-chip networks, aiming to overcome these drawbacks and ensure greater reliability of applications. As a promising alternative to the widely used synchronous on-chip networks for multicore processors, asynchronous on-chip networks can be vulnerable to faults even if they can deliver the same performance with much lower energy and area compared with their synchronous counterparts – faults can not only corrupt data transmission but also cause a unique type of deadlock. By adopting a new redundant code along with a dynamic fault detection and recovery scheme, the authors demonstrate that asynchronous on-chip networks can be efficiently hardened to tolerate both transient and permanent faults and overcome fault-caused deadlocks. This book will serve as an essential guide for researchers and students studying interconnection networks, fault-tolerant computing, asynchronous system design, circuit design and on-chip networking, as well as for professionals interested in designing fault-tolerant and high-throughput asynchronous circuits.
Download or read book Parallel and Distributed Processing and Applications written by Minyi Guo and published by Springer Science & Business Media. This book was released on 2003-06-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The refereed proceedings of the International Symposium on Parallel and Distributed Processing and Applications, ISPA 2003, held in Aizu, Japan in July 2003. The 30 revised full papers and 9 revised short papers presented together with abstracts of 4 keynotes were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on applications on Web-based and intranet systems, compiler and optimization techniques, network routing, performance evaluation of parallel systems, wireless communication and mobile computing, parallel topology, data mining and evolutionary computing, image processing and modeling, network security, and database and multimedia systems.
Download or read book Crossbar Based Interconnection Networks written by Mohsen Jahanshahi and published by Springer. This book was released on 2018-04-10 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text/reference provides an overview of crossbar-based interconnection networks, offering novel perspectives on these important components of high-performance, parallel-processor systems. A particular focus is placed on solutions to the blocking and scalability problems. Topics and features: introduces the fundamental concepts in interconnection networks in multi-processor systems, including issues of blocking, scalability, and crossbar networks; presents a classification of interconnection networks, and provides information on recognizing each of the networks; examines the challenges of blocking and scalability, and analyzes the different solutions that have been proposed; reviews a variety of different approaches to improve fault tolerance in multistage interconnection networks; discusses the scalable crossbar network, which is a non-blocking interconnection network that uses small-sized crossbar switches as switching elements. This invaluable work will be of great benefit to students, researchers and practitioners interested in computer networks, parallel processing and reliability engineering. The text is also essential reading for course modules on interconnection network design and reliability.
Download or read book Interconnection Networks written by Jose Duato and published by Morgan Kaufmann. This book was released on 2003 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword -- Foreword to the First Printing -- Preface -- Chapter 1 -- Introduction -- Chapter 2 -- Message Switching Layer -- Chapter 3 -- Deadlock, Livelock, and Starvation -- Chapter 4 -- Routing Algorithms -- Chapter 5 -- CollectiveCommunicationSupport -- Chapter 6 -- Fault-Tolerant Routing -- Chapter 7 -- Network Architectures -- Chapter 8 -- Messaging Layer Software -- Chapter 9 -- Performance Evaluation -- Appendix A -- Formal Definitions for Deadlock Avoidance -- Appendix B -- Acronyms -- References -- Index.
Download or read book Interconnection Network Reliability Evaluation written by Neeraj Kumar Goyal and published by John Wiley & Sons. This book was released on 2020-09-15 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel and efficient tools, techniques and approaches for reliability evaluation, reliability analysis, and design of reliable communication networks using graph theoretic concepts. In recent years, human beings have become largely dependent on communication networks, such as computer communication networks, telecommunication networks, mobile switching networks etc., for their day-to-day activities. In today's world, humans and critical machines depend on these communication networks to work properly. Failure of these communication networks can result in situations where people may find themselves isolated, helpless and exposed to hazards. It is a fact that every component or system can fail and its failure probability increases with size and complexity. The main objective of this book is to devize approaches for reliability modeling and evaluation of such complex networks. Such evaluation helps to understand which network can give us better reliability by their design. New designs of fault-tolerant interconnection network layouts are proposed, which are capable of providing high reliability through path redundancy and fault tolerance through reduction of common elements in paths. This book covers the reliability evaluation of various network topologies considering multiple reliability performance parameters (two terminal reliability, broadcast reliability, all terminal reliability, and multiple sources to multiple destinations reliability).
Download or read book Built in Fault Tolerant Computing Paradigm for Resilient Large Scale Chip Design written by Xiaowei Li and published by Springer Nature. This book was released on 2023-03-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the end of Dennard scaling and Moore’s law, IC chips, especially large-scale ones, now face more reliability challenges, and reliability has become one of the mainstay merits of VLSI designs. In this context, this book presents a built-in on-chip fault-tolerant computing paradigm that seeks to combine fault detection, fault diagnosis, and error recovery in large-scale VLSI design in a unified manner so as to minimize resource overhead and performance penalties. Following this computing paradigm, we propose a holistic solution based on three key components: self-test, self-diagnosis and self-repair, or “3S” for short. We then explore the use of 3S for general IC designs, general-purpose processors, network-on-chip (NoC) and deep learning accelerators, and present prototypes to demonstrate how 3S responds to in-field silicon degradation and recovery under various runtime faults caused by aging, process variations, or radical particles. Moreover, we demonstrate that 3S not only offers a powerful backbone for various on-chip fault-tolerant designs and implementations, but also has farther-reaching implications such as maintaining graceful performance degradation, mitigating the impact of verification blind spots, and improving chip yield. This book is the outcome of extensive fault-tolerant computing research pursued at the State Key Lab of Processors, Institute of Computing Technology, Chinese Academy of Sciences over the past decade. The proposed built-in on-chip fault-tolerant computing paradigm has been verified in a broad range of scenarios, from small processors in satellite computers to large processors in HPCs. Hopefully, it will provide an alternative yet effective solution to the growing reliability challenges for large-scale VLSI designs.
Download or read book Energy Efficient Fault Tolerant Systems written by Jimson Mathew and published by Springer Science & Business Media. This book was released on 2013-09-07 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art in energy efficient, fault-tolerant embedded systems. It covers the entire product lifecycle of electronic systems design, analysis and testing and includes discussion of both circuit and system-level approaches. Readers will be enabled to meet the conflicting design objectives of energy efficiency and fault-tolerance for reliability, given the up-to-date techniques presented.
Download or read book New Horizons of Parallel and Distributed Computing written by Minyi Guo and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel and distributed computing is one of the foremost technologies for shaping future research and development activities in academia and industry. Hyperthreading in Intel processors, hypertransport links in next generation AMD processors, multicore silicon in today’s high-end microprocessors, and emerging cluster and grid computing have moved parallel/distributed computing into the mainstream of computing. New Horizons of Parallel and Distributed Computing is a collection of self-contained chapters written by pioneering researchers to provide solutions for newly emerging problems in this field. This volume will not only provide novel ideas, work in progress and state-of-the-art techniques in the field, but will also stimulate future research activities in the area of parallel and distributed computing with applications. New Horizons of Parallel and Distributed Computing is intended for industry researchers and developers, as well as for academic researchers and advanced-level students in computer science and electrical engineering. A valuable reference work, it is also suitable as a textbook.
Download or read book Design of Cost Efficient Interconnect Processing Units written by Marcello Coppola and published by CRC Press. This book was released on 2020-10-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Streamlined Design Solutions Specifically for NoC To solve critical network-on-chip (NoC) architecture and design problems related to structure, performance and modularity, engineers generally rely on guidance from the abundance of literature about better-understood system-level interconnection networks. However, on-chip networks present several distinct challenges that require novel and specialized solutions not found in the tried-and-true system-level techniques. A Balanced Analysis of NoC Architecture As the first detailed description of the commercial Spidergon STNoC architecture, Design of Cost-Efficient Interconnect Processing Units: Spidergon STNoC examines the highly regarded, cost-cutting technology that is set to replace well-known shared bus architectures, such as STBus, for demanding multiprocessor system-on-chip (SoC) applications. Employing a balanced, well-organized structure, simple teaching methods, numerous illustrations, and easy-to-understand examples, the authors explain: how the SoC and NoC technology works why developers designed it the way they did the system-level design methodology and tools used to configure the Spidergon STNoC architecture differences in cost structure between NoCs and system-level networks From professionals in computer sciences, electrical engineering, and other related fields, to semiconductor vendors and investors – all readers will appreciate the encyclopedic treatment of background NoC information ranging from CMPs to the basics of interconnection networks. The text introduces innovative system-level design methodology and tools for efficient design space exploration and topology selection. It also provides a wealth of key theoretical and practical MPSoC and NoC topics, such as technological deep sub-micron effects, homogeneous and heterogeneous processor architectures, multicore SoC, interconnect processing units, generic NoC components, and embeddings of common communication patterns.
Download or read book Bio Inspired Fault Tolerant Algorithms for Network on Chip written by Muhammad Athar Javed Sethi and published by CRC Press. This book was released on 2020-03-17 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network on Chip (NoC) addresses the communication requirement of different nodes on System on Chip. The bio-inspired algorithms improve the bandwidth utilization, maximize the throughput and reduce the end-to-end latency and inter-flit arrival time. This book exclusively presents in-depth information regarding bio-inspired algorithms solving real world problems focussing on fault-tolerant algorithms inspired by the biological brain and implemented on NoC. It further documents the bio-inspired algorithms in general and more specifically, in the design of NoC. It gives an exhaustive review and analysis of the NoC architectures developed during the last decade according to various parameters. Key Features: Covers bio-inspired solutions pertaining to Network-on-Chip (NoC) design solving real world examples Includes bio-inspired NoC fault-tolerant algorithms with detail coding examples Lists fault-tolerant algorithms with detailed examples Reviews basic concepts of NoC Discusses NoC architectures developed-to-date
Download or read book Towards Network Globalization Proceedings Of The 1991 Singapore International Conference Of Networks Sicon 91 written by Gee Swee Poo and published by World Scientific. This book was released on 1991-08-29 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: With globalization in every area of human activity being a key trend of the1990s, better and faster networks will have an increasingly important role and impact in making the 'global village' a reality. The papers collected in this volume highlight the global nature of the activities and the tremendous pace of R&D in the field of communications and networking.
Download or read book Fault tolerant Onboard Digital Information Switching and Routing for Communications Satellites written by Mary Jo W. Shalkhauser and published by . This book was released on 1993 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Wireless and Optical Networks written by Shengming Jiang and published by Springer Science & Business Media. This book was released on 2012-02-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the challenges of all-optical and wireless networks for the future Internet, with a focus on cross-layer design and optimization. Features: presents a thorough introduction to major networking modes and their effect on Internet development; proposes a new structure favorable for all-optical packet switching; discusses a new quality of service (QoS) provisioning approach, which overcomes the scalability problem of IntServ and the coarse QoS granularity of DiffServ; describes the end-to-end arguments in Internet design, before investigating a solution to congestion control problems in multi-hop wireless and all-optical networks; examines how to exploit multiple-input-multiple-output technology to improve network performance in centralized wireless networks; surveys green networking strategies from a quantitative perspective; suggests a strategic vision for possible developments of network technology for the future Internet.
Download or read book Proceedings written by and published by . This book was released on 1992 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Communication Technologies and Virtual Mobile Networks written by G. Rajakumar and published by Springer Nature. This book was released on 2023-06-01 with total page 923 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality research papers presented at Intelligent Communication Technologies and Virtual Mobile Networks (ICICV 2023), held at Francis Xavier Engineering College, Tirunelveli, Tamil Nadu, India, during February 16–17, 2023. The book shares knowledge and results in theory, methodology, and applications of communication technology and mobile networks. The book covers innovative and cutting-edge work of researchers, developers, and practitioners from academia and industry working in the area of computer networks, network protocols and wireless networks, data communication technologies, and network security.
Download or read book Data Networks written by Tony Kenyon and published by Elsevier. This book was released on 2002-07-18 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Networks builds on the foundation laid in Kenyon's first book, High-Performance Data Network Design, with expanded coverage of routing, security, multicasting, and advanced design topics such as performance optimization and fault tolerance. Kenyon provides strategies for overcoming some of the most challenging problems in network design and management. He provides clear, specific solutions for day-to-day problems facing network designers and IT managers. In this book, you will find optimization advice from an experienced practitioner that you can put to work in your own system.As security and network performance become more and more critical to a company's success, the system administrator's job becomes even more difficult. Use the principles, tips, and techniques Kenyon offers here to enhance and protect the flow of data within your enterprise.·Covers Addressing, Routing, Multicasting, and Quality of Service (QoS) design for enterprise network design.·Extensive coverage on relevant Security Technologies and Virtual Private Network (VPN) implementation·Provides advanced coverage on Risk Assessment, Availability Analysis, Fault Tolerance, Disaster Recovery, and Network Optimization.
Download or read book VLSI for Artificial Intelligence and Neural Networks written by Jose G. Delgado-Frias and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an edited selection of the papers presented at the International Workshop on VLSI for Artifidal Intelligence and Neural Networks which was held at the University of Oxford in September 1990. Our thanks go to all the contributors and especially to the programme committee for all their hard work. Thanks are also due to the ACM-SIGARCH, the IEEE Computer Society, and the lEE for publicizing the event and to the University of Oxford and SUNY-Binghamton for their active support. We are particularly grateful to Anna Morris, Maureen Doherty and Laura Duffy for coping with the administrative problems. Jose Delgado-Frias Will Moore April 1991 vii PROLOGUE Artificial intelligence and neural network algorithms/computing have increased in complexity as well as in the number of applications. This in tum has posed a tremendous need for a larger computational power than can be provided by conventional scalar processors which are oriented towards numeric and data manipulations. Due to the artificial intelligence requirements (symbolic manipulation, knowledge representation, non-deterministic computations and dynamic resource allocation) and neural network computing approach (non-programming and learning), a different set of constraints and demands are imposed on the computer architectures for these applications.
