Download or read book Corrosion Resistance of Steels Nickel Alloys and Zinc in Aqueous Media written by Michael Schütze and published by John Wiley & Sons. This book was released on 2016-01-05 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is derived from the online reference "Corrosion Handbook", bringing together the relevant information about corrosion protection and prevention for steels, one of the most widely used materials. It provides comprehensive information, including tabulated data and references, on the corrosion properties of the following materials: Unalloyed steels and cast steel, unalloyed cast iron, high-alloy cast iron, high-silicon cast iron, structural steels with up to 12% chromium, ferritic chromium steels with more than 12% chromium, ferritic-austenitic steels with more than 12% chromium, high-alloy multiphase steels, ferritic/perlitic-martensitic steels, ferritic-austenitic steels/duplex steels, austenitic chromium-nickel steels, austenitic chromium-nickel-molybdenum steels, austenitic chromium-nickel steels with special alloying additions, special iron-based alloys, and zinc. The following corrosive media are considered: Seawater, brackish water, industrial waste water, municipal waste water, drinking water, high-purity water.
Download or read book Chlorine and Hydrogen Chloride written by Assembly of Life Sciences (U.S.). Committee on Medical and Biologic Effects of Environmental Pollutants and published by . This book was released on 1976 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 INTRODUCTION. 2 SOURCERS OF CHLORINE AND HYDROGEN CHLORIDE. 3 CONSUMPTION OF CHLORINE AND HYDROGEN CHLORIDE. 4 ATMOSPHERIC CHEMISTRY OF CHLORINE COMPOUNDS. 5 EFFECTS OF CHLORINE AND HYDROGEN CHLORIDE ON MAN AND ANIMALS. 6 EFFECTS OF CHLORINE AND HYDROGEN CHLORIDE ON VEGETATION. 7 PROPERTY DAMAGE AND PUBLIC NUISANCE. 8 SAFETY IN USE AND HANDLING OF CHLORINE AND ANHYDROUS HYDROGEN CHLORIDE.
Download or read book Corrosion and Electrochemistry of Zinc written by Xiaoge Gregory Zhang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humankind's use of zinc stretches back to antiquity, and it was a component in some of the earliest known alloy systems. Even though metallic zinc was not "discovered" in Europe until 1746 (by Marggral), zinc ores were used for making brass in biblical times, and an 87% zinc alloy was found in prehistoric ruins in Transylvania. Also, zinc (the metal) was produced in quantity in India as far back as the thirteenth century, well before it was recognized as being a separate element. The uses of zinc are manifold, ranging from galvanizing to die castings to electronics. It is a preferred anode material in high-energy-density batteries (e.g., Ni/Zn, Ag/Zn, ZnJair), so that its electrochemistry, particularly in alkaline media, has been extensively explored. In the passive state, zinc is photoelectrochemically active, with the passive film displaying n-type characteristics. For the same reason that zinc is considered to be an excellent battery anode, it has found extensive use as a sacrificial anode for the protection of ships and pipelines from corrosion. Indeed, aside from zinc's well-known attributes as an alloying element, its widespread use is principally due to its electrochemical properties, which include a well-placed position in the galvanic series for protecting iron and steel in natural aqueous environments and its reversible dissolution behavior in alkaline solutions.
Download or read book Electrodeposition of Alloys written by Abner Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrodeposition of Alloys: Principles and Practice, Volume I covers the general and theoretical aspects of the electrodeposition of alloy containing silver and/or copper. This book is organized into three parts encompassing 21 chapters. The first part considers first the history of electrodeposition, the applications of electrodeposited alloys, and the practical considerations involved in electrodeposition. This part also deals with the effect of operating variables on composition of electrodeposited alloys, and the physico-chemical properties of the alloy. The second part focuses on the theoretical aspects of alloy electrodeposition. This part includes discussions on the role of cathode diffusion layer, the effects of complexing agents, and the concept of alloy plating. The third part discusses the practical aspects of the electrodeposition of alloys, focusing primarily on the electrodeposition of alloys from aqueous solutions. This part examines first brass and bronze plating, followed by the electrodeposition of copper-tin, silver, and iron containing alloys. This book is directed toward electrochemists and researchers.
Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous editioninvaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.
Download or read book Research and Development Progress Report written by United States. Office of Saline Water and published by . This book was released on 1965 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Science and Technology Second Edition written by David E.J. Talbot and published by CRC Press. This book was released on 2007-06-07 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their efforts, industries continue to lose millions of dollars every year to the destructive effects of corrosion on both structures and equipment. A large part of the problem is that diagnosing its causes and developing strategies to avoid corrosion depend on the application of principles drawn from a broad spectrum of physical sciences not typically encountered in engineering and other technical disciplines associated with industrial production. While continuing to fully explain the basic principles needed to understand corrosion science, this new edition of Corrosion Science and Technology has been updated and expanded to present the very latest technologies and strategies for limiting costly metal degradation caused by corrosion. Written by respected experts who possess an understanding of the sciences involved as well as experience with the development of corrosion control methods, this volume describes the chemistry, electrochemistry, physics, and metallurgy of various types of metals, and evaluates numerous protection measures and surface treatments. New to the Second Edition • New chapters that examine the corrosion resistance of copper, nickel, titanium, and their respective alloys • An entire chapter devoted to the expanded discussion of cathodic protection by impressed current and sacrificial anodes • Extended coverage of the equipment used in the medicine, power generation, and marine environments • Additional case histories and recently employed real-world applications Exploring corrosion control methods used in an expanded variety of commercial enterprises including aviation, automobile manufacturing, food processing, and building construction, this practical guide presents proven and cost-effective methods that industrial engineers can call upon to better protect material assets.
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Prevention and Protection written by Edward Ghali and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Prevention and Protection: Practical Solutions presents a functional approach to the various forms of corrosion, such as uniform corrosion, pitting corrosion, crevice corrosion, galvanic corrosion, stress corrosion, hydrogen-induced damage, sulphide stress cracking, erosion-corrosion, and corrosion fatigue in various industrial environments. The book is split into two parts. The first, consisting of five chapters: Introduction and Principles (Fundamentals) of Corrosion Corrosion Testing, Detection, Monitoring and Failure Analysis Regulations, Specifications and Safety Materials: Metals, Alloys, Steels and Plastics Corrosion Economics and Corrosion Management The second part of the book consists of two chapters which present: a discussion of corrosion reactions, media, active and active-passive corrosion behaviour and the various forms of corrosion, a collection of case histories and practical solutions which span a wide range of industrial problems in a variety of frequently encountered environments, including statues & monuments, corrosion problems in metallurgical and mineral processing plants, boilers, heat exchangers and cooling towers, aluminum and copper alloys, galvanized steel structures as well as hydrogeological environmental corrosion This text is relevant to researchers and practitioners, engineers and chemists, working in corrosion in industry, government laboratories and academia. It is also suitable as a course text for engineering students as well as libraries related to chemical and chemical engineering institutes and research departments.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Corrosion Data written by Bruce D. Craig and published by ASM International. This book was released on 1994-12-31 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes it easy for you to find what effect environment has on the corrosion of metals and alloys. However, this volume offers information on additional environments including concrete, soil, groundwater, distilled water, sodium acetate and more. ThereAs also updated and expanded coverage of previously discussed environments as well as information on environments which deal with the dairy, food, brewing, aerospace, petrochemical and building industries. The environments are listed alphabetically. Each listing includes a general description of the conditions, a comment on the corrosion characteristics of various alloys in such a situation, a bibliography of recent articles specific to the environment, tables consolidating and comparing corrosion rates at various temperatures and concentrations for various alloys, and graphical information. Also included are summaries on the general corrosion characteristics of major metals and alloys.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1971 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Tests and Standards written by Robert Baboian and published by ASTM International. This book was released on 2005 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt:
