Download or read book Corrosion Protection at the Nanoscale written by Susai Rajendran and published by . This book was released on 2020-03-12 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Protection at the Nanoscale explores fundamental concepts on how metals can be protected at the nanoscale by using both nanomaterials-based solutions, including nanoalloys, noninhibitors and nanocoatings. It is an important reference resource for both materials scientists and engineers wanting to find ways to create an efficient corrosion prevention strategy. Nanostructure materials have been widely used in many products, such as print electronics, contact, interconnection, implant, nanosensors and display units to lessen the impact of corrosion. Traditional methods for protection of metals include various techniques, such as coatings, inhibitors, electrochemical methods (anodic and cathodic protections), metallurgical design are covered in this book. Nanomaterials-based protective methods can offer many advantages over their traditional counterparts, such as protection for early-stage, higher corrosion resistance, better corrosion control. This book also outlines these advantages and discusses the challenges of implementing nanomaterials as corrosion protection agents on a wide scale.

Download or read book Corrosion Protection and Control Using Nanomaterials written by V S Saji and published by Elsevier. This book was released on 2012-02-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion. Explores the potential use of nanotechnology and nanomaterials for corrosion prevention, protection and control Discusses the impact of nanotechnology in reducing corrosion cost and investigates various factors on the corrosion behaviour of nanocrystalline materials Provides a series of case studies and applications of nanomaterials for corrosion control

Download or read book Controlling and Protecting Corrosion Using Nanomaterials written by and published by . This book was released on 2018-05 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials are significant because of their unique properties that may lead to new and stimulating applications. Nanocoatings are one of the leading topics within the range of nanotechnology. Through nanoscale engineering of surfaces and layers, an enormous range of functionalities and new physical effects can be achieved. Current scenario of application of nanotechnology in the field of corrosion prevention of metals is reviewed in this compendium. Nanostructured materials (1-100 nm) are known for their outstanding mechanical and physical properties due to their extremely fine grain size and high grain boundary volume fraction. Significant progress has been made in various aspects of synthesis of nanoscale materials. The focus is now shifting from synthesis to manufacture of useful structures and coatings having greater wear and corrosion resistance.Corrosion Protection and Control Using Nanomaterials covers the latent use of nanotechnology and nanomaterials for corrosion prevention, protection and control. Recent research and developments in this area are discussed in designing efficient coating materials and alloys, which provide superior resistance to corrosion. It provides a review of the latest research findings and key applications in the field of nanomaterials. It will highlight the continued growth and new challenges in nanomaterials science, engineering, and nanotechnology, both for application development and for basic research. Furthermore, it presents on Synthesis and characterization of thermally evaporated copper bismuth sulfide thin films and development of novel corrosion techniques for a green environment. Chapters review moisture-absorbing and abrasion-resistant transparent coating on polystyrene and enhanced corrosion resistance of PVD-CrN Coatings by ALD Sealing Layers.We hope this book will be of immense interest for students, researchers and engineers working with nanomaterials in an assortment of industries with, aerospace, automotive and chemical engineering as well as academics studying the distinctive protection and control presented by nanomaterials against corrosion.

Download or read book Corrosion Prevention Nanoscience written by Berdimurodov Elyor Tukhlievich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-07-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, surface-engineered and modified nanomaterials have been developed as corrosion inhibitors for different metals alloys in coating and solution phases. This book covers current emerging trends and applications in nanomaterials and nanotechnologies and their applications in corrosion prevention. It offers synthesis, surface modification for enhanced dispersibility and protection, composite formation and their anticorrosive applications.

Download or read book Developments in Corrosion Protection written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2014-02-20 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first thing that comes to your mind after hearing the term “corrosion” is corrosion of a metal. Corrosion is a basically harmful phenomenon, but it can be useful in some cases. For instance, environment’s pollution with corrosion products and damage to the performance of a system are among its harmful effects, whereas electric energy generation in a battery and cathodic protection of many structures are among its advantages. However, these advantages are almost nothing as compared to the costs and effects imposed by its detrimental influences. The enormous costs of this phenomenon can be better understand through studying the published statistics on direct and indirect corrosion damages on economy of governments. The direct cost of corrosion is near 3 % of the gross domestic product (GDP) of USA. Considering this huge cost, it is necessary to develop and expand the corrosion science and its protection technologies.

Download or read book Advanced Coatings for Corrosion Protection written by Wolfram Fürbeth and published by MDPI. This book was released on 2021-01-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a significant issue in many industrial fields. Among other strategies, coatings are by far the most important technology for corrosion protection of metallic surfaces. The Special Issue “Advanced Coatings for Corrosion Protection” has been launched as a means to present recent developments in any type of advanced coating for corrosion protection. This book compiles 15 contributions on metallic, inorganic, polymeric and nanoparticle enhanced coatings that provide corrosion protection as well as other functionalities.

Download or read book Modified Nanomaterials for Environmental Applications written by Onoyivwe Monday Ama and published by Springer Nature. This book was released on 2021-11-16 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the electrochemical and nanostructural properties of new photoanode/electrolyte combinations used in the development of novel surface-modified nanomaterials for environmental applications. As water treatment is rapidly becoming a global challenge due to the increasing complexity and number of the various pollutants present, the book explores fundamental issues relating to environmental applications of nanomaterials. It addresses relevant topics ranging from electrochemical synthesis and characterization, to applications of photoanodes in corrosion prevention and biosensors for wastewater treatment. Featuring up-to-date experimental results on nanomaterials for detection of pharmaceuticals and heavy metals in wastewater, this contributed volume is useful to electrochemical researchers, materials scientists, and chemical and civil engineers interested in advanced photoelectrochemical research for environmental applications.

Download or read book Polymer Based Nanoscale Materials for Surface Coatings written by Sabu Thomas and published by Elsevier. This book was released on 2023-05-10 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-Based Nanoscale Materials for Surface Coatings presents the latest advances and emerging technologies in polymer-based nanomaterials for coatings, focusing on novel materials, characterization techniques, and cutting-edge applications. Sections present the fundamentals of surface preparation and nanocoatings, linking materials and properties, explaining the correlation between morphology, surface phenomena, and surface protection mechanism, and covering theory, modeling and simulation. Other presented topics cover characterization methods, with an emphasis on the latest developments in techniques and approaches. Aging and lifecycle assessment of coated surfaces and coatings are also discussed.Final sections explore advanced applications across a range of fields, including intelligent coatings for biomedical implants, self-healing coatings, syper-hydrophobicity, electroluminescence, sustainable edible coatings, marine antifouling, corrosion resistance, and photocatalytic coatings. Explains the fundamentals of coatings and surface protection, mechanisms, materials and properties, and modeling and simulation Presents detailed information on the latest characterization techniques to prepare nanoscale polymer coatings with enhanced properties Explores a broad range of state-of-the-art applications and considers aging and lifecycle assessments of coatings

Download or read book Corrosion and Corrosion Protection written by James Douglas Sinclair and published by . This book was released on 2001 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Preventive Materials and Corrosion Testing written by S.K. Dhawan and published by CRC Press. This book was released on 2020-03-02 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an extensive coverage of conjugated polymer based nano-composite coatings with advanced anti-corrosive properties. The book gives detailed explanation of corrosion testing methods and techniques to evaluate the corrosion resistance of the coatings. It includes elaborate discussion on classification of corrosion, electrochemistry of corrosion process, theories explaining the mechanism of corrosion and various corrosion testing standards. Electrochemical studies like open circuit potential (OCP) variation with time, potentiodynamic polarization, Electrochemical Impedance Spectroscopy (EIS) and accelerated corrosion testing are highlighted as important tools to extract information about the behavior of coatings under corrosive conditions. The book discusses epoxy-conjugated polymer based novel composite coating formulations, including aniline and o-toluidine, o-anisidine, phenetidine and pentafluoroaniline with appropriate fillers like SiO2, flyash, ZrO2 nanoparticles, and chitosan for the protection of metallic substrates. A general discussion on the self healing mechanism of epoxy-polypyrrole based biopolymer hybrid composite coatings is included in this book. This book provides a critical review on the conjugated polymer based composite coatings with superior corrosion resistance, good mechanical integrity, better adhesion properties and self healing ability under highly aggressive conditions which can be commercially used for the protection of metal substrates from corrosion.

Download or read book New Pigments and Additives for Corrosion Protection by Organic Coatings written by Flavio Deflorian and published by Frontiers Media SA. This book was released on 2020-12-11 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.

Download or read book Anti Corrosive Nanomaterials written by Renhui Zhang and published by CRC Press. This book was released on 2023-08-15 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a great challenge in many industries, especially in the automotive, aerospace, and oil and gas industries, with conservative estimations accounting for losses of around 2.2 trillion US dollars per year in the United States alone. Providing a comprehensive overview of the history and development of nanomaterials, this book discusses various practices for protection against corrosion. Key Features: Provides a comprehensive and updated review of major innovations in the field of nanomaterials in industrial, corrosion, and environmental science and engineering Encompasses design, characterization, mechanism, and application of nanomaterials from different strategies on the efficacy and major challenges associated with successful scaleup designing Essential reference for present and future research in nanomaterials Includes relevant aspects of organic and inorganic nanomaterials, hybrid nanomaterials, and nanocoatings in anticorrosion applications Coalescing a wide range of research on nanomaterials and anticorrosion practices, this book is of particular appeal to students, industry professionals, and academics.

Download or read book Corrosion and Corrosion Protection Handbook written by Philip A. Schweitzer and published by CRC Press. This book was released on 1989 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Protection of Metals by Intrinsically Conducting Polymers written by Pravin P. Deshpande and published by CRC Press. This book was released on 2016-01-13 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of conducting polymers for the anticorrosion protection of metals has attracted great interest during the last 30 years. The design and development of conducting polymers-based coating systems with commercial viability is expected to be advanced by applying nanotechnology and has received substantial attention recently. This book begins with corrosion fundamentals and ends with an emphasis on developments made in conducting polymer science and technology using nanotechnology. Additionally, it gives a detailed account of experimental methods of corrosion testing.

Download or read book Self Healing Smart Materials written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book describes the design, synthesis, mechanisms, characterization, fundamental properties, functions and development of self-healing smart materials and their composites with their allied applications. It covers cementitious concrete composites, bleeding composites, elastomers, tires, membranes, and composites in energy storage, coatings, shape-memory, aerospace and robotic applications. The 21 chapters are written by researchers from a variety of disciplines and backgrounds.

Download or read book Corrosion Protection of Metals and Alloys Using Graphene and Biopolymer Based Nanocomposites written by Hatem M.A. Amin and published by CRC Press. This book was released on 2021-02-15 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts from both academia and industry, this book provides up-to-date reviews and promising approaches for corrosion control of metals and alloys via sustainable biopolymers and carbon nanomaterials coatings, focusing on the wonder material “graphene” which is more solid than steel. This book delivers essential information for improving the environmental and economic viability of current coating technologies. It is also a valuable reference for those who are interested in corrosion science and corrosion protection including professionals from the industry as well as academia.

Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 2: Corrosion Control deals with corrosion and corrosion control. Topics covered range from the design and economic aspects of corrosion to cathodic and anodic protection; pretreatment and design for metal finishing; protective action of metallic coatings; and methods of applying metallic coatings. Corrosion testing, monitoring, and inspection are also considered. This volume is comprised of 13 chapters; the first of which provides an overview of corrosion control, with emphasis on the classification of practical methods of corrosion control. Attention then turns to the economic aspects of corrosion; how corrosion control is implemented in chemical and petrochemical plants; and design considerations to prevent corrosion in buildings and structures. Design in marine engineering and in relation to welding and joining is also discussed. The chapters that follow focus on the principles and practical applications of cathodic and anodic protection; chemical and mechanical pretreatments for metal finishing; and design for corrosion protection by electroplated and paint coatings. Chemical conversion coatings and miscellaneous coatings such as vitreous enamel coatings are also considered. Finally, this book describes the conditioning of the atmosphere to reduce corrosion. Tables and specifications as well as terms and abbreviations are included. This book will be of value to students as well as workers and engineers involved in corrosion and corrosion control.