Download or read book Corrosion Performance of Decorative Electrodeposited Nickel and Nickel Iron Alloy Coatings written by EA. Baker and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion performance of chromium-electroplated, decorative nickel and nickel-iron alloy electrodeposits has been studied in marine and industrial atmospheres and by means of copper-accelerated acetic acid-salt spray testing (CASS). Decorative nickel coatings, 15 and 30 ?m thick, gave better overall corrosion performance than comparable decorative nickel-iron alloy coatings. Because of the rapid staining that occurs in marine and industrial atmospheres, nickel-iron alloy deposits are not suitable for decorative applications involving moderate and severe corrosion service. Decorative nickel-iron alloy deposits, 7.6 μm thick, appear suitable for mild corrosion service on the basis of CASS test results, but results were affected by iron content and type of electrodeposited chromium. The relatively good performance of thin alloy deposits accounts for established applications in mildly corrosive environments.
Download or read book Atmospheric Corrosion of Metals written by S. W Dean and published by ASTM International. This book was released on 1982 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallic and Other Inorganic Coatings Electrodeposited Coatings of Nickel Nickel Plus Chromium Copper Plus Nickel and of Copper Plus Nickel Plus Chromium written by British Standards Institute Staff and published by . This book was released on 2009-08-31 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal coatings, Electrodeposition, Electroplating, Coatings, Corrosion protection, Decorative coatings, Nickel, Chromium, Copper, Iron, Steels, Zinc alloys, Copper alloys, Aluminium, Aluminium alloys, Designations, Thickness, Corrosion resistance, Heat treatment
Download or read book Electrodeposition of Nickel and Nickel Alloy Coatings with Layered Silicates for Enhanced Corrosion Resistance and Mechanical Properties written by Jeerapan Tientong and published by . This book was released on 2014 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Use of Synthetic Environments for Corrosion Testing written by P. E. Francis and published by ASTM International. This book was released on 1988 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book Corrosion Abstracts written by and published by . This book was released on 1987 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Metals in Cultural Heritage written by Virginia Costa and published by Getty Publications. This book was released on 2019-07-16 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide provides artists, conservators, curators, and other heritage professionals with tools for understanding, evaluating, and approaching the care and treatment of modern metals. The proliferation of new metals—such as stainless steels, aluminum alloys, and metallic coatings—in modern and contemporary art and architecture has made the need for professionals who can address their conservation more critical than ever. This volume seeks to bridge the gap between the vast technical literature on metals and the pressing needs of conservators, curators, and other heritage professionals without a metallurgy background. It offers practical information in a simple and direct way, enabling curators, conservators, and artists alike to understand and evaluate the objects under their care. This invaluable reference reframes information formerly found only in specialized technical and industrial publications for the context of cultural heritage conservation. As the first book to address the properties, testing, and maintenance issues of the hundreds of metals and alloys available since the beginning of the twentieth century, it is destined to become an essential resource for conservators, artists, fabricators, curators, collectors, and anyone working with modern metals.
Download or read book Guide to the Selection and Use of Electroplated and Related Finishes written by F. Lowenheim and published by ASTM International. This book was released on 1982 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plating and Surface Finishing written by and published by . This book was released on 1999 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Chromium Plating written by J. K. Dennis and published by Newnes. This book was released on 1972 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.
Download or read book Coated Metal written by Leonid Tushinsky and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be viewed as a scientific investigation combined with methodological studies. For practical reasons each of the methods is described in the following general manner including: the uses and the scientific investigation tasks; methods of sampling; testing equipment; test preparation; tests; data processing; controversial issues and conclusions. Each of the 37 methods contains a range of 1 to 8 variants. As far as we know, the book is the first publication in the field.
Download or read book Electroplating written by Nasser Kanani and published by Elsevier. This book was released on 2004-11-23 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating: Basic Principles, Processes and Practice offers an understanding of the theoretical background to electroplating, which is essential if the practical results are to be as required. This book is different in that it explains HOW the electrodeposition processes work, covering such topics as the elctrodeposition of composites, multilayers, whisker formation and giant magnetoresistive effects. The section on R & D approaches will be especially useful for organisations in the field. This is the first English language version of a well-known German language book from a prestigious author of international repute.‘Electroplating’ is an invaluable resource for manufacturers of coatings, electrochemists, metal finishers and their customers and academics in surface engineering. · Offers an understanding of the theoretical background to electroplating · Explains how the electrodeposition processes work · Prestigious author of international repute
Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now. Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals). The result is a formidable reference source for those in all aspects of the metal powder industry. Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Expert Russian team of authors, all very experienced English translation and update of book previously published in Russian
Download or read book The Metallurgy of Zinc Coated Steels written by Arnold Marder and published by Elsevier. This book was released on 2023-02-22 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metallurgy of Zinc Coated Steels provides a comprehensive overview of the science and engineering of zinc coatings. Beginning with a look at new innovations made in the hot-dip coating methods (CGL), the book goes on to discuss phase equilibria, Zn bath phenomena and overlay coating formations. Both processing methods and controls are covered, as well as corrosion resistance and coating product properties. The book concludes with a discussion of future opportunities for zinc coatings. This book is a vital resource for both individuals new to this area while also serving as a handbook for users and producers of zinc coatings. Presents a basic understanding of the science and engineering behind zinc coatings with a thorough and cutting-edge look at their processing methods, controls, properties, and applications Discusses corrosion resistance, overlay coating formation, heat treatment, interface reactions, deposition processes, and more Covers real-world applications of these coatings
