Download or read book Corrosion of Metals and Alloys Basic Terms and Definitions written by British Standards Institute Staff and published by . This book was released on 2000-04-15 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Metals, Alloys, Vocabulary, Definitions
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Corrosion Protection of Metals and Alloys Using Graphene and Biopolymer Based Nanocomposites written by Hatem M.A. Amin and published by CRC Press. This book was released on 2021-02-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts from both academia and industry, this book provides up-to-date reviews and promising approaches for corrosion control of metals and alloys via sustainable biopolymers and carbon nanomaterials coatings, focusing on the wonder material “graphene” which is more solid than steel. This book delivers essential information for improving the environmental and economic viability of current coating technologies. It is also a valuable reference for those who are interested in corrosion science and corrosion protection including professionals from the industry as well as academia.
Download or read book Handbook of Hot dip Galvanization written by Peter Maaß and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.
Download or read book Atmospheric Corrosion written by Christofer Leygraf and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATMOSPHERIC CORROSION Presents a comprehensive look at atmospheric corrosion, combining expertise in corrosion science and atmospheric chemistry Atmospheric corrosion has been a subject of engineering study, largely empirical, for nearly a century. Scientists came to the field rather later on and had considerable difficulty bringing their arsenal of tools to bear on the problem. Atmospheric corrosion was traditionally studied by specialists in corrosion having little knowledge of atmospheric chemistry, history, or prospects. Atmospheric Corrosion provides a combined approach bringing together experimental corrosion and atmospheric chemistry. The second edition expands on this approach by including environmental aspects of corrosion, atmospheric corrosion modeling, and international corrosion exposure programs. The combination of specialties provides a more comprehensive coverage of the topic. These scientific insights into the corrosion process and its amelioration are the focus of this book. Key topics include the following: Basic principles of atmospheric corrosion chemistry Corrosion mechanisms in controlled and uncontrolled environments Degradation of materials in architectural, transport, and structural applications; electronic devices; and cultural artifacts Protection of existing materials and choosing new ones that resist corrosion Prediction of how and where atmospheric corrosion may evolve in the future Complete with appendices discussing experimental techniques, computer models, and the degradation of specific metals, Atmospheric Corrosion, Second Edition continues to be an invaluable resource for corrosion scientists, corrosion engineers, conservators, environmental scientists, and anyone interested in the theory and application of this evolving field. The book concerns primarily the atmospheric corrosion of metals and is written at a level suitable for advanced undergraduates or beginning graduate students in any of the physical or engineering sciences.
Download or read book Corrosion written by Ambrish Singh and published by BoD – Books on Demand. This book was released on 2020-10-21 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a global threat and a burning topic for new and innovative research. Corrosion causes shut downs, economic losses, delays, failures, accidents, losses of life, and losses in productivity. “Wherever metal is, there corrosion will occur” – this is a general concept as not many protection methods are available to mitigate corrosion. The available methods can only delay the process but cannot stop or protect the metal completely. So there is always a need for good research and inventions in this field. This book includes the recent research work done in the field of corrosion. The chapters are written by reputed authors in the field of corrosion and have been reviewed extensively before acceptance. The chapters focus on different aspects of corrosion to provide readers with a good idea of the overall process. The diversification of the chapters will keep the readers interested and motivated for new innovations in the field of corrosion. It will be very useful to scholars, academicians, researchers, and industrialists.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Springer Handbook of Metrology and Testing written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2011-07-22 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.
Download or read book Dictionary of Metals written by Harold M. Cobb and published by ASM International. This book was released on 2012-01-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book Description: The Dictionary of Metals is the authoritative reference work for terms and definitions of metals and terms relating to metals. It also includes a considerable amount of history starting with the seven metals of antiquity. Each of the metallic elements has a discussion that includes the discoverer and date, the naming of the metal and its meaning, the major applications, the significance of the discovery, and physical properties. Includes a timeline of important events in the history of metals and metallurgy.
Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-06 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. - Explores the literature between 1950 and 2020 and contains over 2000 references - Offers the most complete monograph on the issue - Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair - Delivers the most complete review on corrosion of metals in marine/offshore environments - Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms
Download or read book Corrosion Prevention Nanoscience written by Berdimurodov Elyor Tukhlievich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-07-24 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, surface-engineered and modified nanomaterials have been developed as corrosion inhibitors for different metals alloys in coating and solution phases. This book covers current emerging trends and applications in nanomaterials and nanotechnologies and their applications in corrosion prevention. It offers synthesis, surface modification for enhanced dispersibility and protection, composite formation and their anticorrosive applications.
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book Developments in Corrosion Protection written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2014-02-20 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first thing that comes to your mind after hearing the term “corrosion” is corrosion of a metal. Corrosion is a basically harmful phenomenon, but it can be useful in some cases. For instance, environment’s pollution with corrosion products and damage to the performance of a system are among its harmful effects, whereas electric energy generation in a battery and cathodic protection of many structures are among its advantages. However, these advantages are almost nothing as compared to the costs and effects imposed by its detrimental influences. The enormous costs of this phenomenon can be better understand through studying the published statistics on direct and indirect corrosion damages on economy of governments. The direct cost of corrosion is near 3 % of the gross domestic product (GDP) of USA. Considering this huge cost, it is necessary to develop and expand the corrosion science and its protection technologies.
Download or read book Corrosion and Materials in Hydrocarbon Production written by Dr. Bijan Kermani and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers the engineering aspects of corrosion and materials in hydrocarbon production This book captures the current understanding of corrosion processes in upstream operations and provides a brief overview of parameters and measures needed for optimum design of facilities. It focuses on internal corrosion occurring in hydrocarbon production environments and the key issues affecting its occurrence, including: the types and morphology of corrosion damage; principal metallic materials deployed; and mitigating measures to optimise its occurrence. The book also highlights important areas of progress and challenges, and looks toward the future of research and development to enable improved and economical design of facilities for oil and a gas production. Written for both those familiar and unfamiliar with the subject—and by two authors with more than 60 years combined industry experience—this book covers everything from Corrosion Resistant Alloys (CRAs) to internal metal loss corrosion threats, corrosion in injection systems to microbiologically influenced corrosion, corrosion risk analysis to corrosion and integrity management, and more, notably: Comprehensively covers the engineering aspects of corrosion and materials in hydrocarbon production Written by two, renowned experts in the field Offers practical guide to those unfamiliar with the subject whilst providing a focused roadmap to addressing the topics in a precise and methodical manner Covers all aspects of corrosion threat and remedial and mitigation measures in upstream hydrocarbon production applicable to sub-surface, surface, and transportation facilities Outlines technology challenges that need further research as a pre-cursor to moving the industry forward. Operational and Engineering Aspects of Corrosion and Materials in Hydrocarbon Production is an excellent guide for both practicing materials and corrosion engineers working in hydrocarbons production as well as those entering the area who may not be fully familiar with the subject.
Download or read book Corrosion Inhibitors Principles and Recent Applications written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-04-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To protect metals or alloys from corrosion, some methods can be used such as isolating the structure from the aggressive media or compensating the loss of electrons from the corroded structure. The use of corrosion inhibitors may include organic and inorganic compounds that adsorb on the metallic structure to isolate it from its surrounding media to decrease oxidation-reduction processes. This book collects new developments about corrosion inhibitors and their recent applications.
Download or read book Organic Corrosion Inhibitors written by Chandrabhan Verma and published by John Wiley & Sons. This book was released on 2021-09-11 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of organic corrosion inhibitors used in modern industrial platforms, including current developments in the design of promising classes of organic corrosion inhibitors Corrosion is the cause of significant economic and safety-related problems that span across industries and applications, including production and processing operations, transportation and public utilities infrastructure, and oil and gas exploration. The use of organic corrosion inhibitors is a simple and cost-effective method for protecting processes, machinery, and materials while remaining environmentally acceptable. Organic Corrosion Inhibitors: Synthesis, Characterization, Mechanism, and Applications provides up-to-date coverage of all aspects of organic corrosion inhibitors, including their fundamental characteristics, synthesis, characterization, inhibition mechanism, and industrial applications. Divided into five sections, the text first covers the basics of corrosion and prevention, experimental and computational testing, and the differences between organic and inorganic corrosion inhibitors. The next section describes various heterocyclic and non-heterocyclic corrosion inhibitors, followed by discussion of the corrosion inhibition characteristics of carbohydrates, amino acids, and other organic green corrosion inhibitors. The final two sections examine the corrosion inhibition properties of carbon nanotubes and graphene oxide, and review the application of natural and synthetic polymers as corrosion inhibitors. Featuring contributions by leading researchers and scientists from academia and industry, this authoritative volume: Discusses the latest developments and issues in the area of corrosion inhibition, including manufacturing challenges and new industrial applications Explores the development and implementation of environmentally-friendly alternatives to traditional toxic corrosion inhibitors Covers both established and emerging classes of corrosion inhibitors as well as future research directions Describes the anticorrosive mechanisms and effects of acyclic, cyclic, natural, and synthetic corrosion inhibitors Offering an interdisciplinary approach to the subject, Organic Corrosion Inhibitors: Synthesis, Characterization, Mechanism, and Applications is essential reading for chemists, chemical engineers, researchers, industry professionals, and advanced students working in fields such as corrosion inhibitors, corrosion engineering, materials science, and applied chemistry.
