Download or read book Corrosion of Metals written by Helmut Kaesche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Metallic Corrosion written by P.E., Philip A. Schweitzer and published by CRC Press. This book was released on 2006-12-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding corrosion is essential for selecting and maintaining equipment and structural components that will withstand environmental and process conditions effectively. Fundamentals of Metallic Corrosion: Atmospheric and Media Corrosion of Metals focuses on the mechanisms of corrosion as well as the action of various corrodents on metals and th
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.
Download or read book Passivity and Protection of Metals Against Corrosion written by N. D. Tomashov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable progress has been made in the past 20 years toward understanding the basic mechanisms of corrosion, and the application of this knowledge to its control. From the very beginning, educational institutions and industrial research laboratories have contributed greatly toward determining and elucidating the fundamental principles of corrosion reactions. Some of the basic principles involved in cor rosion of metals can be credited to early investigators. Michael Faraday in 1830-1840 studied the relationship between the quantity of a metal dissolved and the electric current which was produced by this reaction. He also proposed that the passivation of iron was through the formation of a film and that the dissolution of a metal was electro chemical in nature. Sir Humphrey Davy in 1824 worked out the funda mentals of galvanic corrosion of ships' hulls and applied sacrificial zinc anodes to protect them from sea water corrosion. Richard Arlie in 1847 demonstrated that corrosion produced by oxygen at the surface of iron in a flowing stream generated a current. With the fundamental knowledge available to him from these early investigators, Willis Rodney Whitney developed and expressed, in its most useful form, one of the basic scientific principles which provides modern corrosion specialists with a fundamental basis of corrosion control. Dr. Whitney concluded that corrosion of iron is electrochemical, and that the rate is simply a function of the electromotive force and resistance of the circuit.
Download or read book Corrosion and Protection of Metals written by David M Bastidas and published by . This book was released on 2020-09-16 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and Scope-During the last few decades, an enormous effort has been made to understand corrosion phenomena and their mechanisms, and to elucidate the causes that dramatically influence the service lifetime of metal materials. The performance of metal materials in aggressive environments is critical for a sustainable society. The failure of the material in service impacts the economy, the environment, health, and society. In this regard, corrosion-based economic losses due to maintenance, repair, and the replacement of existing structures and infrastructure account for up to 4% of gross domestic product (GDP) in well developed countries. One of the biggest issues in corrosion engineering is estimating service lifetime. Corrosion prediction has become very difficult, as there is no direct correlation with service lifetime and experimental lab results, usually as a result of discrepancies between accelerated testing and real corrosion processes. It is of major interest to forecast the impact of corrosion-based losses on society and the global economy, since existing structures and infrastructure are becoming old, and crucial decisions now need to be made to replace them. On the other hand, environmental protocols seek to reduce greenhouse effects. Therefore, low emission policies, in force, establish regulations for the next generation of materials and technologies. Advanced technologies and emergent materials will enable us to get through the next century. Great advances are currently in progress for the development of corrosion-resistant metal materials for different sectors, such as energy, transport, construction, and health. This Special Issue on the corrosion and protection of metals is focused on current trends in corrosion science, engineering, and technology, ranging from fundamental to applied research, thus covering subjects related to corrosion mechanisms and modelling, protection and inhibition processes, and mitigation strategies.
Download or read book Corrosion of Metals and Hydrogen Related Phenomena written by J. Flis and published by Elsevier. This book was released on 2016-01-11 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that about 40% of the annual production of metals is used to repair or replace materials damaged by corrosion. Corrosion causes waste of the natural material and energy resources, it creates serious materials problems for many technologies and adversely affects almost every area of engineering. The use of metals in various aggressive environments has resulted in an extremely wide diversity of corrosion problems. This book presents a collection of concise reviews written by experts in the field on selected topics of metallic corrosion and on some aspects of interaction of hydrogen with metals. A comprehensive range of problems is examined including localized corrosion, high temperature corrosion in liquid metals and molten salts, transport control in corrosion processes, entry of hydrogen into metals, hydrogen embrittlement, and hydrogen reactions with metals. The variety of topics covered in the book will provide corrosion scientists, engineers, university lecturers and students alike with an interdisciplinary approach to solving problems of materials degradation and surface processes in metal corrosion.
Download or read book Organic Inhibitors of Corrosion of Metals written by Y.I. Kuznetsov and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Inhibitors of Corrosion of Metals provides a detailed review of the various theories advanced to explain the mechanisms of organic inhibitors. Author Yu.I. Kuznetsov explores the role of potential and charge of the metal, the nature of the organic species used as the inhibitor, and the function of the solvent. The author draws connections between these key elements and the processes of passivation, pitting, synergism, and complex formation. This unique volume brings together the mechanistic and practical aspects of corrosion control by organic inhibitors.
Download or read book An Introduction to Corrosion and Protection of Metals written by Gosta Wranglen and published by Springer. This book was released on 1985-05-30 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion may be defined as an unintentional attack on a material through reaction with a surrounding medium. The term can refer to a process or to the damage caused by such a process. According to this general definition, materials other than metals, such as ceramics, plastics or concrete, may also be subject to corrosion (or corrode). When no particular reference is made to the material, however, it is normally understood that a metal is being attacked. It is entirely in this limited sense that the term is used in this book. There are good reasons for treating the corrosion of metals separately, apart from deterioration or decay of other materials. Since metals have a high electric conductivity, their corrosion is usually of an electrochemical nature. The chemical deterioration of electrically non-conducting ma terials, such as plastics and ceramics, is governed by other physico-chemical principles. It is necessary to devote more attention to metallic corrosion nowadays than earlier, due to 1. An increased use of metals within all fields of technology. 2. The use for special applications, e.g. within the atomic energy field, of rare and expensive metals, whose preservation requires particular precautions. 3. A more corrosive environment due to the increasing pollution of air and water. 4. The use of metallic constructions of more slender dimensions which do not tolerate corrosive attacks to the same extent as did the heavy constructions used in the old days.
Download or read book Corrosion by Liquid Metals written by J. E. Draley and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Corrosion Resistant Metals Committee and the Nuclear Metallurgy Committee of the Institute of Metals Division of The Metallurgical Society of AlME sponsored a 2-1/2 day symposium on "Corrosion by Liquid Metals". The symposium was held in Philadelphia, October 13-15, 1969, during the 1969 Fall Meeting of the Metallurgical Society and the Materials Engineering Con gress of the American Society for Metals. Cosponsors included the American Society for Metals and the American Nuclear Society. The purpose of the symposium was to bring together the several aspects of the subject of corrosion by liquid metals, so that perspective could be provided on the entire subject, to help in dividuals dealing with liquid metal corrosion problems acquire a sound basis of understanding, and to provide an opportunity for discussion between those doing research in this field. An exposition of the subject is timely, in view of the in creasing development of liquid metal heat and power sources for special purposes, including heat-pipe systems, NASA's SNAP power systems, and the AEC's liquid metal fast breeder reactor system. This book contains the proceedings of the symposium divided into four separate topics: I. Corrosion of Steels by Sodium, II. Alkali-Refractory Metal Interactions, III. Corrosion by Non-Alkali Metals, and IV. Analysis of Solid-Liquid Metal Inter actions (two sessions).
Download or read book Theoretical Aspects of the Localized Corrosion of Metals written by J. Touek and published by Trans Tech Publications Ltd. This book was released on 1985-01-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: A consistent theory is developed for predicting the incidence of localized corrosion and, most importantly, for the prediction of those substances which should be useful in inhibiting the process.
Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.
Download or read book Techniques for Corrosion Monitoring written by and published by Elsevier. This book was released on 2008-02-01 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion monitoring techniques play a key role in efforts to combat corrosion, which can have major economic and safety implications. This important book starts with a review of corrosion fundamentals and provides a four-part comprehensive analysis of a wide range of methods for corrosion monitoring, including practical applications and case studies. The first part of the book reviews electrochemical techniques for corrosion monitoring, such as polarization techniques, potentiometric methods, electrochemical noise and harmonic analyses, galvanic sensors, differential flow through cells and multielectrode systems. A second group of chapters analyses the physical or chemical methods of corrosion monitoring. These include gravimetric, radioactive tracer, hydrogen permeation, electrical resistance and rotating cage techniques. Part II also includes a chapter on the innovative nondestructive evaluation technologies that can be used to monitor corrosion. Part III examines corrosion monitoring in special environments such as microbial systems, concrete and soil, and remote monitoring and model predictions. A final group of chapters includes various case studies covering ways in which corrosion monitoring can be applied to engine exhaust systems, cooling water systems, pipelines, equipment in chemical plants, and other real world systems. With its distinguished editor and international team of contributors, Techniques for corrosion monitoring is a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion in such areas as automotive engineering, power generation, water suppliers and the petrochemical industry. Provides a comprehensive analysis of the range of techniques for corrosion monitoring Specific case studies are included to highlight the main issues A valuable reference guide for engineers, scientific and technical personnel who deal with corrosion
Download or read book Environmental Degradation of Metals written by U.K. Chatterjee and published by CRC Press. This book was released on 2001-03-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical reference presents for the first time in a single volume all types of environmental degradation a metallic compound may undergo during its processing, storage, and service. Clarifying general and localized corrosion effects, Environmental Degradation of Metals describes the effects of atmospheric exposure, high-temperature gases, soil, water, weak and strong chemicals, liquid metals, and nuclear radiation. It determines whether corrosion can occur under a given set of conditions, shows how improvements in component design can reduce corrosion, and details the high- and low-temperature effects of oxidizing agents. The book also investigates the instantaneous and delayed failure of solid metal in contact with liquid metal, highlights the influence of hydrogen on metal, and profiles radiation effects on metal.
Download or read book Atmospheric Corrosion written by Christofer Leygraf and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATMOSPHERIC CORROSION Presents a comprehensive look at atmospheric corrosion, combining expertise in corrosion science and atmospheric chemistry Atmospheric corrosion has been a subject of engineering study, largely empirical, for nearly a century. Scientists came to the field rather later on and had considerable difficulty bringing their arsenal of tools to bear on the problem. Atmospheric corrosion was traditionally studied by specialists in corrosion having little knowledge of atmospheric chemistry, history, or prospects. Atmospheric Corrosion provides a combined approach bringing together experimental corrosion and atmospheric chemistry. The second edition expands on this approach by including environmental aspects of corrosion, atmospheric corrosion modeling, and international corrosion exposure programs. The combination of specialties provides a more comprehensive coverage of the topic. These scientific insights into the corrosion process and its amelioration are the focus of this book. Key topics include the following: Basic principles of atmospheric corrosion chemistry Corrosion mechanisms in controlled and uncontrolled environments Degradation of materials in architectural, transport, and structural applications; electronic devices; and cultural artifacts Protection of existing materials and choosing new ones that resist corrosion Prediction of how and where atmospheric corrosion may evolve in the future Complete with appendices discussing experimental techniques, computer models, and the degradation of specific metals, Atmospheric Corrosion, Second Edition continues to be an invaluable resource for corrosion scientists, corrosion engineers, conservators, environmental scientists, and anyone interested in the theory and application of this evolving field. The book concerns primarily the atmospheric corrosion of metals and is written at a level suitable for advanced undergraduates or beginning graduate students in any of the physical or engineering sciences.
Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.
