Download or read book Corrosion Management of Seawater Cooling Systems written by Francois Ropital and published by Elsevier. This book was released on 2024-06-15 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. - Covers key technological developments in corrosion management of seawater cooling systems - Includes coverage of seawater heat exchangers - Provides information on many different forms of corrosion - Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) - Discusses maintenance, control, monitoring and inspection

Download or read book Impact and Management of Marine Biofouling written by Yigit Kemal Demirel and published by Frontiers Media SA. This book was released on 2022-08-04 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control Technologies for Aluminum Alloy Vessel written by Zhigang Fang and published by Springer Nature. This book was released on 2020-01-03 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elaborates the corrosion testing and assessment methods for the aluminum alloy vessel in the service and internal environment. The emphasis is placed on the research of general materials corrosion characteristics, electrochemical protection design, surface protection, coating and painting, etc. This book helps readers to keep abreast of the whole technology system of the corrosion prevention and control of aluminum alloy vessel, especially the systematic engineering view of life cycle corrosion control for the vessel is of particular interest to readers.

Download or read book The Cost of Corrosion in China written by Baorong Hou and published by Springer Nature. This book was released on 2019-09-26 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively covers corrosion and corrosion protection in China in the areas including infrastructure, transportation, energy, water environment, as well as manufacturing and public utilities. Furthermore, it presents a major consulting project of Chinese Academy of Engineering, which was the largest corrosion investigation project in Chinese history, including the corresponding methods, processes and corrosion protection strategies, and provides valuable information for numerous industries. Sharing essential insights into corrosion prediction and decision-making, this book will help to decrease costs and extend the service life of equipment and facilities; accordingly, it will benefit scientists and engineers working on corrosion research and protection, as well as economists and government employees.

Download or read book Heat Exchangers written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2024-02-29 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchangers: Operation, Performance, and Maintenance, Third Edition covers heat exchanger installation, commissioning and operation, and maintenance and performance monitoring in service. Focusing on in-service issues like flow-induced vibration, corrosion, and corrosion control, and fouling and fouling control, the book explores performance deterioration in service, maintenance issues, defects, tube failures, and how to detect these issues with NDT methods. It discusses various cleaning processes and repair methods. The book also considers boilers, utility boilers, coal-based thermal power plants, boiler corrosion, and boiler degradation mechanisms. It discusses different types of cooling systems, feedwater treatment, deaerators, feedwater heaters, economizers, condensers, cooling towers, and cooling-water management. The book serves as a useful reference for researchers, graduate students, power plant engineers, and engineers in the field of heat exchanger design, including pressure vessel manufacturers.

Download or read book Marine Corrosion written by and published by . This book was released on 1977 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

Download or read book Smart Protective Coatings for Corrosion Control written by Lingwei Ma and published by John Wiley & Sons. This book was released on 2024-03-27 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Protective Coatings for Corrosion Control Overview of the latest research in advanced coatings for anticorrosion and the development of optimized surfaces with high anticorrosion ability Smart Protective Coatings for Corrosion Control introduces the newest research developments in self-healing coatings, self-reporting coatings, and superhydrophobic coatings, reviewing corrosion processes and strategies, smart coatings for corrosion protection, techniques for synthesizing and applying smart coatings, different kinds of self-healing and self-reporting coatings activated by different environmental stimuli, and current and future trends of protective coatings for automotive, aerospace, marine, nuclear, oil/gas, and military applications. This book also discusses new ideas in the field, such as the combination of self-healing and self-reporting properties, new techniques to study localized microscale electrochemical corrosion behavior, as well as atmospheric corrosion monitor technique to study the real-time protection behavior of coatings in different environments. The processes of coating degradation and metal corrosion are discussed in detail so that non-experts can gain a basic understanding of the corrosion protection techniques. Written by two highly qualified academics with significant research experience in the field, Smart Protective Coatings for Corrosion Control includes information on: Coating preparation, filler preparation, surface characterization, macroscopic and microscopic electrochemical properties, and self-healing performance of self-healing coating systems under different environmental stimuli Photothermal conversion species such as graphene oxide, titanium nitride, and Fe3O4 Different types of corrosion indicators, such as phenolphthalein, sulfosalicylic acid-modified carbon dots, and phenanthroline High-mobility polymer networks that endow a shape memory effect and allow coatings to recover their original shape and barrier properties Solutions to three corrosion conditions—room temperature immersion, alternating wet-dry, and outdoor atmospheric exposure conditions Presenting the latest research in the field, Smart Protective Coatings for Corrosion Control is a practical and highly valuable reference on the subject for scientists, researchers, and students in diverse programs of study.

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Water Formed Deposits written by Zahid Amjad and published by Elsevier. This book was released on 2022-03-24 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water-Formed Deposits: Fundamentals and Mitigation Strategies wholly presents the important issue of deposits in aqueous systems, both industrial and biological. By analyzing causes, mechanisms and mitigation strategies, the book helps researchers/engineers/end-users gain a fundamental understanding of the issues underlying deposit formation and mitigation. It covers numerous, fundamental aspects of water-formed deposits, while also giving an applications' perspective. The book's goal is to assist the reader in his/her understanding of the important issues of scale formation, while also helping with potential solutions. - Provides a fundamental understanding of deposit formation by presenting basic science and mechanisms - Presents an "applications perspective - Reveals a systematic overview of deposit-related challenges and their mitigation - Correlates structure to performance in mitigation strategies - Analyzes current legal aspects and regulations - Includes case studies from the "real industrial world for the industrial reader/end user

Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy

Download or read book Materials in Marine Technology written by Robert L. Reuben and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in Marine Technology covers the important aspects of metallurgy and materials engineering which must be taken into account when designing for marine environments. The purpose is to aid materials selection and the incorporation of materials data into the design, manufacture and inspection strategy. Recent advances in materials technology, including the use of new materials for marine applications Alloys, Polymers and Composites are examined in detail. The integrated approach is design oriented and is supported by recent case studies.

Download or read book Phase I uniform national discharge standards for vessels of the armed forces technical development document written by and published by DIANE Publishing. This book was released on 1999 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. - Selects cost-effective methods to control corrosion - Quantitatively measures and estimates corrosion rates - Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others - Provides a gateway to more than 1,000 industry best practices and international standards

Download or read book Trends in Maritime Technology and Engineering written by C. Guedes Soares and published by CRC Press. This book was released on 2022-06-07 with total page 1325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Maritime Technology and Engineering comprises the papers presented at the 6th International Conference on Maritime Technology and Engineering (MARTECH 2022) that was held in Lisbon, Portugal, from 24-26 May 2022. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2022 is the sixth of this new series of biennial conferences. The book covers all aspects of maritime activity, including in Volume 1: Structures, Hydrodynamics, Machinery, Control and Design. In Volume 2: Maritime Transportation and Ports, Maritime Traffic, Safety, Environmental Conditions, Renewable Energy, Oil & Gas, and Fisheries and Aquaculture. Trends in Maritime Technology and Engineering aims at academics and professionals in the above mentioned fields.

Download or read book NB NB T NBT Product Catalog Translated English of Chinese Standard NB NB T NBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese Industry Standards - Category: NB; NB/T; NBT.

Download or read book Corrosion Performance of Metals for the Marine Environment EFC 63 written by Roger Francis and published by CRC Press. This book was released on 2019-05-14 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.