Download or read book Corrosion Inhibition Performance of Copper Carbonate in CO2 Absorption Process Using Aqueous Solution of Monoethanolamine written by Immanuelraj Soosaiprakasam and published by . This book was released on 2007 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is one of the most severe operational problems in CO2 absorption processes, which use aqueous solutions of alkanolamines, especially when carbon steel is used for plant construction. Corrosion inhibitors are widely applied used in this process to suppress severe corrosion to an acceptable level. However, currently available corrosion inhibitors are heavy metals, which are toxic to human health and the environment, making solvent handling and waste disposal more difficult and costly. This work evaluated a low-toxic corrosion inhibitor, copper carbonate (CuCO3), as a replacement for toxic corrosion inhibitors. An inhibition evaluation was performed on copper carbonate by examining its parametric effects on the corrosion rate and corrosion behavior of carbon steel.
Download or read book Corrosion in CO2 Absorption Process Using Aqueous Monoethanolamine piperazine Solution written by Manjula Nainar and published by . This book was released on 2007 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work explores the promise of aqueous solutions of blended monoethanolamine (MEA) and piperazine (PZ) as a cost-effective solvent for carbon dioxide (CO2) capture from industrial flue gas streams with respect to addressing corrosion, which is regarded as one of the most severe operational problems in typical CO2 capture plants. Two types of corrosion experiments were carried out in bench-scale setups, electrochemical tests for short-term exposure and weight loss tests for long-term exposure. The results show that the blended MEA/PZ solutions are more corrosive than the MEA solutions. The corrosion rate of carbon steel increases with concentration of PZ, total amine concentration, CO2 loading of solution, solution temperature, the presence of heat stable salts, and the presence of the proprietary oxidative degradation inhibitor (Inhibitor A provided by the University of Texas at Austin). Among the tested heat-stable salts, formate is the most corrosive salt, followed by acetate, oxalate, and thiosulfate in the absence of oxygen (O2), while acetate is the most corrosive salt followed by formate, oxalate, and thiosulfate in the presence of O2. Based on the level of corrosion rate found in the MEA/PZ system, corrosion control is required during plant operation to suppress the corrosion rate of carbon steel to below an acceptable level. Sodium metavanadate (NaVO3) and copper carbonate (CuCO3) were proven to be effective corrosion inhibitors with inhibition performance of up to 94-98%. Dissolved O2 is required in the solution to maintain active Cu2 or V5+, which, thus, prevents the metallic copper (Cu) from plating out or the formation of other oxidative states of vanadate. The performance of these two inhibitors can be deteriorated by the presence of heat-stable salts in the solutions.
Download or read book Solubility Study of Carbon Dioxide in Aqueous Amine Solution of Diethyl Monoethanolamine written by and published by . This book was released on 2014 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, climate change and global warming are the main issues on environmental concern due to the higher amount of carbon dioxide in the atmosphere. The main sources of carbon dioxide are energy-related activities such as power generation. Now, the effective technology to remove CO2 from these sources is absorption especially with amine solution. The commercially used amine solutions are monoethanolamine (MEA) and methyldiethanolamine (MDEA). Nevertheless, they also have disadvantages such as low capacity, corrosion and high energy requirement. Therefore, many new solvents have been developed to improve efficiency for CO2 capture. Consequently, the objective of this work is to measure the solubility of CO2 in an aqueous solution of 2-(Diethylamino)ethanol (DEAE) as a novel solution at the temperature from 30°C to 80 °C, CO2 partial pressures ranging from 5 to 100 kPa and solution concentration from 3 to 5 molar. The solubility results of CO2 in DEAE solution are compared with those of aqueous solution of MEA and MDEA. For cyclic capacity, the results present that DEAE provides higher performance which is up to 856% and 151 % higher than that of MEA and MDEA. respectively. This means that DEAE can save more energy and cost for solution regeneration and makes carbon capture technology viable.
Download or read book Oxidative Degradation of Aqueous Monoethanolamine in CO2 Capture Processes written by George Scott Goff and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Theoretical Study of Carbon Dioxide Absorption Into Potassium Carbonate Solution Promoted with Enzyme written by Arezoo Khodayari and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: According to the Intergovernmental Panel on Climate Change (IPCC), carbon dioxide (CO2) concentration in the atmosphere has increased from its pre-industrial value of 280 parts per million by volume (ppmv) to 384 ppmv. IPCC predicts that CO2 concentration in the atmosphere will rise to 550 ppmv by the year 2100, if anthropogenic emissions continue to increase. The average temperature at the Earth's surface could increase 1.8-4.0K above the 1990 levels by the end of this century. Such warming is anticipated to cause sea level rise, increased intensity and frequency of extreme weather events, ice shelf disruption, and changes in rainfall patterns. As a result, reducing CO2 emissions from anthropogenic sources is a high priority. Combustion of fossil fuels for power generation is the major contributors of CO2 emission into the environment. Currently, CO2 chemical absorption using monoethanolamine (MEA) as a solvent is the best available option for CO2 capture from flue gas streams. The issue with this technology is the high capture cost which ranges from $50/metric ton to $70/metric ton CO2 avoided. Energy consumption by the process contributes to 60% of the cost. Thus, use of solvents with lower heats of absorption is preferable. A novel process called Integrated Vacuum Carbonate Absorption Process (IVCAP), which employs potassium carbonate (PC) as a solvent, has been proposed. Since chemical affinity of CO2 to K2CO3 is weak compared to MEA, the regeneration of CO2-rich solution can be operated under vacuum at a lower temperature. Hence, a low quality steam from the power plant steam cycle can be used as the heat source for the regeneration. IVCAP process is expected to have 25-30% lower energy requirements as compared to an MEA-based process. However, compared with the MEA solution, PC solutions with low heats of absorption generally exhibit much slower CO2 absorption rates. Hence, a biological catalyst, carbonic anhydrase (CA) was investigated to promote the rate of CO2 absorption into select PC solutions. Experiments were performed in a stirred-tank reactor to evaluate the activity of the CA enzyme under IVCAP conditions. Results revealed that addition of up to 300 mg/l CA enzyme to the PC solutions at 25oC increases the absorption rate by a factor of 6-20 when compared with the same solution without the CA. It was also observed that, the CO2 absorption rates into the aqueous PC solutions with different initial conversion levels of PC to potassium bicarbonate are similar, with differences no larger than 20%, when the concentration of CA enzyme is 300 mg/l. It was also observed that, at the 300 mg/l CA concentration, increasing the temperature from 25oC to 50oC reduces the rate of CO2 absorption, by up to 20%. A mathematical model based on Higbie's penetration theory was developed to simulate the absorption of CO2 into the PC solutions. A comparison of modeled to experimental absorption rates of CO2 provided agreement within 30%. The modeling results revealed that at CA concentrations > 3,000 mg/l, the absorption rate of CO2 is independent of CA concentration. Compared to the enzyme concentration (300 mg/l) used in this study, a further increase of enzyme concentration to a level not larger than 3,000 mg/l could further increase the absorption rate of CO2. Based on the experimental and modeling results obtained in this research, it is recommended that the CO2 absorption rate into PC-CA be further enhanced by improving other parameters such as the activity of CA enzyme and design optimization of the absorption column including the type of packing material. Further work is required to investigate the stability of the CA enzyme at longer test duration and use of immobilized CA enzyme. Effectiveness of the regeneration cycle also needs to be investigated. Further work should also include the test of an integrated absorption/ regeneration system for CO2 capture at a real flue gas condition. 0́3
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1990 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Green Corrosion Inhibitors written by V. S. Sastri and published by John Wiley & Sons. This book was released on 2012-02-14 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book to cover developments in corrosion inhibitors is long overdue. This has been addressed by Dr Sastri in a book which presents fundamental aspects of corrosion inhibition, historical developments and the industrial applications of inhibitors. The book deals with the electrochemical principles and chemical aspects of corrosion inhibition, such as stability of metal complexes, the Hammett equation, hard and soft acid and base principle, quantum chemical aspects and Hansch' s model and also with the various surface analysis techniques, e.g. XPS, Auger, SIMS and Raman spectroscopy, that are used in industry for corrosion inhibition. The applications of corrosion inhibition are wide ranging. Examples given in this book include: oil and gas wells, petrochemical plants, steel reinforced cement, water cooling systems, and many more. The final chapters discuss economic and environmental considerations which are now of prime importance. The book is written for researchers in academia and industry, practicing corrosion engineers and students of materials science, engineering and applied chemistry.
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture
Download or read book Absorption Based Post Combustion Capture of Carbon Dioxide written by Paul Feron and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absorption-Based Post-Combustion Capture of Carbon Dioxide provides a comprehensive and authoritative review of the use of absorbents for post-combustion capture of carbon dioxide. As fossil fuel-based power generation technologies are likely to remain key in the future, at least in the short- and medium-term, carbon capture and storage will be a critical greenhouse gas reduction technique. Post-combustion capture involves the removal of carbon dioxide from flue gases after fuel combustion, meaning that carbon dioxide can then be compressed and cooled to form a safely transportable liquid that can be stored underground. Provides researchers in academia and industry with an authoritative overview of the amine-based methods for carbon dioxide capture from flue gases and related processes Editors and contributors are well known experts in the field Presents the first book on this specific topic
Download or read book Handbook of Climate Change Mitigation written by Wei-Yin Chen and published by Springer. This book was released on 2012-02-13 with total page 2130 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a mounting consensus that human behavior is changing the global climate and its consequence could be catastrophic. Reducing the 24 billion metric tons of carbon dioxide emissions from stationary and mobile sources is a gigantic task involving both technological challenges and monumental financial and societal costs. The pursuit of sustainable energy resources, environment, and economy has become a complex issue of global scale that affects the daily life of every citizen of the world. The present mitigation activities range from energy conservation, carbon-neutral energy conversions, carbon advanced combustion process that produce no greenhouse gases and that enable carbon capture and sequestion, to other advanced technologies. From its causes and impacts to its solutions, the issues surrounding climate change involve multidisciplinary science and technology. This handbook will provide a single source of this information. The book will be divided into the following sections: Scientific Evidence of Climate Change and Societal Issues, Impacts of Climate Change, Energy Conservation, Alternative Energies, Advanced Combustion, Advanced Technologies, and Education and Outreach.
Download or read book Carbon Capture written by Jennifer Wilcox and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches the energy science sub-field carbon capture with an interdisciplinary discussion based upon fundamental chemical concepts ranging from thermodynamics, combustion, kinetics, mass transfer, material properties, and the relationship between the chemistry and process of carbon capture technologies. Energy science itself is a broad field that spans many disciplines -- policy, mathematics, physical chemistry, chemical engineering, geology, materials science and mineralogy -- and the author has selected the material, as well as end-of-chapter problems and policy discussions, that provide the necessary tools to interested students.
Download or read book Gas Treating with Chemical Solvents written by Giovanni Astarita and published by John Wiley & Sons. This book was released on 1983 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2016-10-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.
Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.
Download or read book Carbon Dioxide Mineralization and Utilization written by Pen-Chi Chiang and published by Springer. This book was released on 2017-03-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.
Download or read book Gas liquid Reactions written by P. V. Danckwerts and published by . This book was released on 1970 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
