EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Corrosion Characteristics Mechanisms and Control Methods of Candidate Alloys in Sub and Supercritical Water

Download or read book Corrosion Characteristics Mechanisms and Control Methods of Candidate Alloys in Sub and Supercritical Water written by Donghai Xu and published by Springer Nature. This book was released on 2021-12-07 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide comprehensive and systematic introduction and summary of corrosion characteristics, mechanisms, and control methods of candidate alloys in sub- and supercritical water environment. First of all, corrosion types of candidate alloys and the effects of major alloying elements on corrosion resistance of potential alloys in sub- and supercritical water are compared and analyzed. At the same time, research status of candidate materials, and development and application trends of several corrosion-resistant alloys are summarized. Then, corrosion characteristics of Ni-Cr, Ni-Cr-Mo, Ni-Fe-Cr and Ni-Fe-Cr-Mo-Cu corrosion-resistant alloys, FeCrAl alloy, and Zircaloy are discussed in detail, including the corrosion rate, the structure and composition of oxide film, and the effects of various surface treatment processes, etc. More specifically, it also investigates corrosion behavior of Ni-based alloy, Fe-Ni-based, and stainless steels in supercritical water. The effects of aggressive species on the corrosion behavior of Ni-base alloys are also explored in supercritical water. Readers will further discover the total corrosion processes and mechanisms of typical candidate alloys in sub- and supercritical water environment. Finally, the work explores the corrosion control methods such as ceramic coatings and passivation processes in supercritical water oxidation and in subcritical water, respectively. Future challenges and development trends of corrosion research of candidate materials in sub- and supercritical water environments are covered at the end of this book. It offers valuable reference for theoretically guiding material selection and design and operating parameter optimization of key equipment in the sub- and supercritical water technologies. The book is written for senior undergraduates, graduate students, scholars, and researchers who are interested in corrosion behavior of candidate materials of supercritical water oxidation system, supercritical water gasification system, and nuclear reactor.

Book Corrosion of selected alloys in sub and supercritical water oxidation environments

Download or read book Corrosion of selected alloys in sub and supercritical water oxidation environments written by Todd Andrew Danielson and published by . This book was released on 1995 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Supercritical Water Oxidation

Download or read book Supercritical Water Oxidation written by and published by . This book was released on 1992 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Hydrothermal and Supercritical Water Processes

Download or read book Hydrothermal and Supercritical Water Processes written by Gerd Brunner and published by Elsevier. This book was released on 2014-04-04 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrothermal and Supercritical Water Processes presents an overview on the properties and applications of water at elevated temperatures and pressures. It combines fundamentals with production process aspects. Water is an extraordinary substance. At elevated temperatures (and pressures) its properties change dramatically due to the modifications of the molecular structure of bulk water that varies from a stable three-dimensional network, formed by hydrogen bonds at low and moderate temperatures, to an assembly of separated polar water molecules at high and supercritical temperatures. With varying pressure and temperature, water is turned from a solvent for ionic species to a solvent for polar and non-polar substances. This variability and an enhanced reactivity of water have led to many practical applications and to even more research activities, related to such areas as energy transfer, extraction of functional molecules, unique chemical reactions, biomass conversion and fuel materials processing, destruction of dangerous compounds and recycling of useful ones, growth of monolithic crystals, and preparation of metallic nanoparticles. This book provides an introduction into the wide range of activities that are possible in aqueous mixtures. It is organized to facilitate understanding of the main features, outlines the main applications, and gives access to further information Summarizes fundamental properties of water for engineering applications Compares process and reactor designs Evaluates processes from thermodynamic, economic, and social impact viewpoints

Book Masters Theses in the Pure and Applied Sciences

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 36 (thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 36 reports theses submitted in 1991, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Book Preliminary Corrosion Studies of Candidate Materials for Supercritical Water Oxidation Reactor Systems

Download or read book Preliminary Corrosion Studies of Candidate Materials for Supercritical Water Oxidation Reactor Systems written by John Clarke Orzalli and published by . This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental test facility has been designed and constructed for investigation of the corrosion behavior of candidate materials in a supercritical water oxidation environment. The high temperatures (500 deg C) and high pressures (300 atm) required in this process, made the experimental apparatus construction and control a complex engineering problem. The facility consists of two systems. The first is an exposure autoclave internal volume 850 ml, with associated monitoring and control systems for conducting long term exposure testing of test coupons and U-bends. The second is an electrochemical cell with a potentiostat and frequency response analyzer for conducting Electronic Impedance Spectroscopy (EIS) in the supercritical water environment. Exposure testing of three candidate materials; Inconel 625, Hastelloy C-276 and 316 stainless steel was conducted at three temperature regimes corresponding to three locations in a SCWO waste treatment system. Preliminary results are presented in an environment of demineralized water as a control. Experimental results indicate evidence of a film on the materials characterized by slight weight gain. Light and confocal laser light microscopic evaluations revealed the presence of localized pitting corrosion on the Inconel 625.

Book Encyclopedia of Chemical Processing and Design

Download or read book Encyclopedia of Chemical Processing and Design written by JohnJ. McKettaJr and published by Routledge. This book was released on 2017-11-22 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: ""Waste. Nuclear Reprocessing and Treatment Technologies to Waste, Solid, Trash Facts

Book Meeting United States Japan Marine Facilities Panel

Download or read book Meeting United States Japan Marine Facilities Panel written by United States-Japan Cooperative Program in Natural Resources. Panel on Marine Facilities. Meeting and published by . This book was released on 1992 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book EPA Environmental Engineering Sourcebook

Download or read book EPA Environmental Engineering Sourcebook written by J. Russell Boulding and published by Routledge. This book was released on 2019-03-04 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Environmental Protection Agency (U.S. EPA) publishes several series of documents that provide up-to-date information about environmental site assessment and remediation. The EPA Environmental Engineering Sourcebook includes papers and bulletins that focus on remediation of soil and groundwater, making them available in a convenient form. This book compiles thirty-five documents- written by recognized leaders - on major methods and promising new techniques for hazardous waste treatment and site remediation. Each chapter evaluates the type of contaminant and site characteristics needed to select a technology for use at hazardous waste sites. The EPA Environmental Engineering Sourcebook presents EPA documents in an easy-to-use, concise format. It contains numerous graphs, charts and figures that make it an important resource for those involved in environmental protection, site remediation, and site assessment. Features Contains chapters written by recognized leaders Examines major methods as well as assesses new techniques for hazardous waste treatment and site remediation Presents information in an easy-to-use, concise format Evaluates each type of contaminant and site characteristics for selecting technology at hazardous waste sites

Book Supercritical Water Processing Technologies for Environment Energy and Nanomaterial Applications

Download or read book Supercritical Water Processing Technologies for Environment Energy and Nanomaterial Applications written by Shuzhong Wang and published by Springer Nature. This book was released on 2019-09-18 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents the technical aspects of supercritical water oxidation and supercritical water gasification for energy and environmental applications, which include reactor design, construction materials, corrosion, salt precipitation, etc. The book provides a comprehensive introduction to the properties of supercritical water, and the industrial applications, reaction mechanisms and reaction kinetics of supercritical water oxidation (SCWO) and supercritical water gasification (SCWG). The reactions occurring in supercritical water are complex, and studying their reaction mechanisms is of great importance for the development of supercritical water processing technologies. Accordingly, the book explains the oxidative mechanisms and kinetics of organic matter in supercritical water in detail. However, the harsh reaction conditions in supercritical water can easily create severe reactor corrosion and salt deposition problems. Therefore, the book also comprehensively reports on the mechanism analysis, state of research, and development trends regarding these two problems. Lastly, the book summarizes the development of supercritical water processing technologies, including studies on SCWO and SCWG, as well as near-zero-emission systems of pollutants based on SCWO technology. In short, the book provides a wealth of valuable information for all readers who are interested in using SCWO for organic waste treatment, and in using SCWG for hydrogen production with wet biomass.

Book Texas State Publications

Download or read book Texas State Publications written by and published by . This book was released on 1992-07 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Encyclopedia of Environmental Analysis and Remediation

Download or read book Encyclopedia of Environmental Analysis and Remediation written by and published by . This book was released on 1998 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia is composed of an eight-volume set that provides an overview of the field of environmental analysis. The contents are divided into major content areas including air pollution control, environmental law, and environmental sampling. Thevolumes are organized alphabetically with each article signed by the author(s). The individual articles begin with a summary of the topic heading and then divide the text into subtopics indicated by boldface headings.The articles are written clearly, however, the authors assume a basic knowledge of chemistry and math on the part of the reader. For example, the acid mine drainage article refers to the Arrhenius equation, but does not clarify this statement in the text. Each article contains graphs as well as pictures to illustrate points made in the text. The articles are long and provide a detailed explanation of each topic. The authors also provide a bibliography at the end of each article.Special features of the encyclopedia include a list of contributors, a table of conversion factors and a list of abbreviations and acronyms. The preface outlines the general contents of the encyclopedia. The preface also includes sections that suggest the target audience and recommended usages for the set. The final volume of the set contains an alphabetic index to the topics contained in the volumes.

Book Chemical Engineering Progress

Download or read book Chemical Engineering Progress written by and published by . This book was released on 1999 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: