Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Geotechnical Correlations for Soils and Rocks written by Jean-Claude Verbrugge and published by John Wiley & Sons. This book was released on 2018-07-31 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modelling tools for soils and rocks require more and more specific parameters not always available from the standard or usual survey campaigns, this generally for reasons of delay or costs. The use of correlations to solve the gap between available parameters and the required ones is a common practice. Many of them exist but are spread throughout numerous papers or books. The aim of this formulary is to provide a large synthesis of the existing correlations accumulated by the authors during more than 40 years academic and consulting careers.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Correlations of Soil Properties written by Michael Carter and published by Wiley-Blackwell. This book was released on 1991 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Correlations of Soil Properties provides guidance for civil engineers faced with the problem of having to estimate soil behaviour from little or no laboratory test data. It presents typical values of engineering properties for various types or classes of soil, together with correlations between different properties. Particular emphasis is given to correlations with soil classification tests and to the use of classification systems. Included in the correlations are properties that are difficult to measure directly, such as frost susceptibility and swelling potential. In addition, explanations are given of the engineering relevance of the various properties and the justification of the correlations between properties is discussed.
Download or read book Soil Properties and their Correlations written by Michael Carter and published by John Wiley & Sons. This book was released on 2016-07-20 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential guide to improving preliminary geotechnical analysis and design from limited data Soil Properties and their Correlations, Second Edition provides a summary of commonly-used soil engineering properties and gives a wide range of correlations between the various properties, presented in the context of how they will be used in geotechnical design. The book is divided into 11 chapters: Commonly-measured properties; Grading and plasticity; Density; Permeability, Consolidation and settlement; Shear strength; California bearing ratio; Shrinkage and swelling characteristics; Frost susceptibility; Susceptibility to combustion; and Soil-structure interfaces. In addition, there are two appendices: Soil classification systems; and Sampling methods. This new, more comprehensive, edition provides material that would be of practical assistance to those faced with the problem of having to estimate soil behaviour from little or no laboratory test data. Key features: Soil properties explained in practical terms. A large number of correlations between different soil properties. A valuable aid for assessing design values of properties. Clear statements on practical limitations and accuracy. An invaluable source of reference for experienced professionals working on geotechnical design, it will also give students and early-career engineers an in-depth appreciation of the appropriate use of each property and the pitfalls to avoid.
Download or read book Reliability and Statistics in Geotechnical Engineering written by Gregory B. Baecher and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modeling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems. The resulting engineering models are used to make probabilistic predictions, which are applied to geotechnical problems. Reliability & Statistics in Geotechnical Engineering comprehensively covers the subject of risk and reliability in both practical and research terms * Includes extensive use of case studies * Presents topics not covered elsewhere--spatial variability and stochastic properties of geological materials * No comparable texts available Practicing engineers will find this an essential resource as will graduates in geotechnical engineering programmes.
Download or read book Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering written by A. Anagnostopoulos and published by IOS Press. This book was released on 2013-03-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Download or read book Thermal Properties of Soils written by Omar T. Farouki and published by Trans Tech Publications. This book was released on 1986 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Engineering in the XXI Century Lessons learned and future challenges written by N.P. López-Acosta and published by IOS Press. This book was released on 2019-11-26 with total page 3006 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE) was held in Mexico in 1959. Every 4 years since then, PCSMGE has brought together the geotechnical engineering community from all over the world to discuss the problems, solutions and future challenges facing this engineering sector. Sixty years after the first conference, the 2019 edition returns to Mexico. This book, Geotechnical Engineering in the XXI Century: Lessons learned and future challenges, presents the proceedings of the XVI Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XVI PCSMGE), held in Cancun, Mexico, from 17 – 20 November 2019. Of the 393 full papers submitted, 335 were accepted for publication after peer review. They are included here organized into 19 technical sessions, and cover a wide range of themes related to geotechnical engineering in the 21st century. Topics covered include: laboratory and in-situ testing; analytical and physical modeling in geotechnics; numerical modeling in geotechnics; unsaturated soils; soft soils; foundations and retaining structures; excavations and tunnels; offshore geotechnics; transportation in geotechnics; natural hazards; embankments and tailings dams; soils dynamics and earthquake engineering; ground improvement; sustainability and geo-environment; preservation of historic sites; forensics engineering; rock mechanics; education; and energy geotechnics. Providing a state-of-the-art overview of research into innovative and challenging applications in the field, the book will be of interest to all those working in soil mechanics and geotechnical engineering. In this proceedings, 58% of the contributions are in English, and 42% of the contributions are in Spanish or Portuguese.
Download or read book Characteristics of Geologic Materials and Formations written by Roy E. Hunt and published by CRC Press. This book was released on 2006-10-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properly understanding and characterizing geologic materials and formations is vital for making critical engineering decisions. Identifying and classifying rock masses and soil formations allows reasonable estimation of their characteristic properties. Comprising chapters from the second edition of the revered Geotechnical Engineering Investigation
Download or read book Relationship Between Erodibility and Properties of Soils written by J.-L. Briaud and published by . This book was released on 2019 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) has released NCHRP Research Report 915: Relationship Between Erodibility and Properties of Soils, which provides reliable and simple equations quantifying the erodibility of soils based on soil properties. The report presents a detailed analysis of the issue. In addition, the project that developed the report also produced a searchable spreadsheet that uses statistical techniques to relate geotechnical properties to soil erodibility. The spreadsheet, NCHRP Erosion, includes a searchable database that includes compiled erosion data from the literature review and a plethora of erosion tests. It contains equations which may be used to estimate the erosion resistance of soil and determine whether erosion tests are needed.
Download or read book Foundation Engineering in the Face of Uncertainty written by Fred H. Kulhawy and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIDTH: 405pt; BORDER-COLLAPSE: collapse border=0 cellSpacing=0 cellPadding=0 width=540> WIDTH: 405pt; mso-width-source: userset; mso-width-alt: 19748 width=540> HEIGHT: 31.5pt height=42> BORDER-BOTTOM: #f0f0f0; BORDER-LEFT: #f0f0f0; BACKGROUND-COLOR: transparent; WIDTH: 405pt; HEIGHT: 31.5pt; BORDER-TOP: #f0f0f0; BORDER-RIGHT: #f0f0f0 class=xl65 height=42 width=540>GSP 229 contains 54 papers on risk and uncertainty in foundation engineering presented in honor of Fred H. Kulhawy.
Download or read book Finite Element Analysis in Geotechnical Engineering written by David M Potts and published by Thomas Telford. This book was released on 2001 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insight into the use of the finite method in geotechnical engineering. The first volume covers the theory and the second volume covers the applications of the subject. The work examines popular constitutive models, numerical techniques and case studies.
Download or read book Geotechnical Investigations and Improvement of Ground Conditions written by Anjan Patel and published by Woodhead Publishing. This book was released on 2019-01-31 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Investigation and Improvement of Ground Conditions covers practical information on ground improvement and site investigation, considering rock properties and engineering geology and its relation to construction. The book covers geotechnical investigation for construction projects, including classic case studies with geotechnical significance. Additional sections cover soil compaction, soil stabilization, drainage and dewatering, grouting methods, the stone column method, geotextiles, fabrics and earth reinforcement, miscellaneous methods and tools for ground improvement, geotechnical investigation for construction projects, and forensic geotechnical engineering. Final sections present a series of site-specific case studies.
Download or read book Geotechnics of Organic Soils and Peat written by Bujang B.K. Huat and published by CRC Press. This book was released on 2014-02-18 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peat and organic soils commonly occur as extremely soft, wet, unconsolidated surficial deposits that are an integral part of wetland systems. These types of soils can give rise to geotechnical problems in the area of sampling, settlement, stability, in situ testing, stabilisation and construction. There is therefore a tendency to either avoid build
Download or read book Introduction to Geotechnical Engineering written by Siva Sivakugan and published by . This book was released on 2015-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a concise, easy-to understand manner, INTRODUCTION TO GEOTECHNICAL ENGINEERING, 2e, presents intensive research and observation in the field and lab that have improved the science of foundation design. Now providing both U.S. and SI units, this non-calculus-based book is designed for courses in civil engineering technology programs where soil mechanics and foundation engineering are combined into one course. It is also a useful reference tool for civil engineering practitioners.
