Download or read book Correlation Processing Of Local Seismic Data written by and published by . This book was released on 2010 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excavation and operation of an underground facility is likely to produce an extensive suite of seismic signals observable at the surface for perhaps several km. Probably a large fraction of such signals will be correlated, so the design of a monitoring framework should include consideration of a correlation processing capability. Correlation detectors have been shown to be significantly more sensitive than beam-forming power detectors. Although correlation detectors have a limited detection footprint, they can be generalized into multi-rank subspace detectors which are sensitive over a much larger range of source mechanisms and positions. Production of subspace detectors can be automated, so their use in an autonomous framework may be contemplated. Waveform correlation also can be used to produce very high precision phase picks which may be jointly inverted to simultaneously relocate groups of events. The relative precision of the resulting hypocenters is sufficient to visualize structural detail at a scale of less than a few tens of meters. Three possible correlation processor systems are presented. All use a subspace signal detection framework. The simplest system uses a single-component sensor and is capable of detection and classification of signals. The most complicated system uses many sensors deployed around the facility, and is capable of detection, classification, and high-precision source location. Data from a deep underground mine are presented to demonstrate the applicability of correlation processing to monitoring an underground facility. Although the source region covers an area of about 600m by 580m, all but two of the events form clusters at a threshold of 0.7. All the events could have been detected and classified by the subspace detection framework, and high-precision picks can be computed for all cluster members.
Download or read book Seismic Surface Waves in a Laterally Inhomogeneous Earth written by V.I. Keilis-Borok and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface waves form the longest and strongest portion of a seismic record excited by explosions and shallow earthquakes. Traversing areas with diverse geologic structures, they 'absorb' information on the properties of these areas which is best retlected in dispersion, the dependence of velocity on frequency. The other prop erties of these waves - polarization, frequency content, attenuation, azimuthal variation of the amplitude and phase - arc also controlled by the medium between the source and the recording station; some of these are affected by the properties of the source itself and by the conditions around it. In recent years surface wave seismology has become an indispensable part of seismological practice. The maximum amplitude in the surface wave train of virtually every earthquake or major explosion is being measured and used by all national and international seismological surveys in the determination of the most important energy parameter of a seismic source, namely, the magnitude M,. The relationship between M, and the body wave magnitude fI1t, is routinely employed in identification of underground nuclear explosions. Surface waves of hundreds of earthquakes recorded every year are being analysed to estimate the seismic moment tensor of earthquake sources, to determine the periods of free oscillations of the Earth, to construct regional dispersion curves from which in turn the crustal and upper mantle structure in various areas is derived, and to evaluate the dissipative parameters of the mantle material.
Download or read book Encyclopedia of Solid Earth Geophysics written by Harsh Gupta and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 1579 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few decades have witnessed the growth of the Earth Sciences in the pursuit of knowledge and understanding of the planet that we live on. This development addresses the challenging endeavor to enrich human lives with the bounties of Nature as well as to preserve the planet for the generations to come. Solid Earth Geophysics aspires to define and quantify the internal structure and processes of the Earth in terms of the principles of physics and forms the intrinsic framework, which other allied disciplines utilize for more specific investigations. The first edition of the Encyclopedia of Solid Earth Geophysics was published in 1989 by Van Nostrand Reinhold publishing company. More than two decades later, this new volume, edited by Prof. Harsh K. Gupta, represents a thoroughly revised and expanded reference work. It brings together more than 200 articles covering established and new concepts of Geophysics across the various sub-disciplines such as Gravity, Geodesy, Geomagnetism, Seismology, Seismics, Deep Earth Processes, Plate Tectonics, Thermal Domains, Computational Methods, etc. in a systematic and consistent format and standard. It is an authoritative and current reference source with extraordinary width of scope. It draws its unique strength from the expert contributions of editors and authors across the globe. It is designed to serve as a valuable and cherished source of information for current and future generations of professionals.
Download or read book Seismic Ambient Noise written by Nori Nakata and published by Cambridge University Press. This book was released on 2019-03-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of seismic ambient noise, covering observations, physical origins, modelling, processing methods and applications in imaging and monitoring.
Download or read book Seismic Data Analysis written by Özdoğan Yilmaz and published by SEG Books. This book was released on 2001 with total page 2065 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding the author's original work on processing to include inversion and interpretation, and including developments in all aspects of conventional processing, this two-volume set is a comprehensive and complete coverage of the modern trends in the seismic industry - from time to depth, from 3D to 4D, from 4D to 4C, and from isotropy to anisotropy.
Download or read book Processing of Seismic Reflection Data Using MATLAB written by Wail Mousa and published by Morgan & Claypool Publishers. This book was released on 2011-10-10 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short book is for students, professors and professionals interested in signal processing of seismic data using MATLABTM. The step-by-step demo of the full reflection seismic data processing workflow using a complete real seismic data set places itself as a very useful feature of the book. This is especially true when students are performing their projects, and when professors and researchers are testing their new developed algorithms in MATLABTM for processing seismic data. The book provides the basic seismic and signal processing theory required for each chapter and shows how to process the data from raw field records to a final image of the subsurface all using MATLABTM. The MATLABTM codes and seismic data can be downloaded here. Table of Contents: Seismic Data Processing: A Quick Overview / Examination of A Real Seismic Data Set / Quality Control of Real Seismic Data / Seismic Noise Attenuation / Seismic Deconvolution / Carrying the Processing Forward / Static Corrections / Seismic Migration / Concluding Remarks
Download or read book Seismic Ray Theory written by V. Cerveny and published by Cambridge University Press. This book was released on 2001-07-02 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the seismic ray method; an invaluable advanced textbook and reference volume.
Download or read book The Seismic Wavefield Volume 1 Introduction and Theoretical Development written by B. L. N. Kennett and published by Cambridge University Press. This book was released on 2001-11-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a guide to understanding of seismograms for graduate students, researchers, professionals in academia and the petroleum industry.
Download or read book Practical Seismic Data Analysis written by Hua-Wei Zhou and published by Cambridge University Press. This book was released on 2014-01-23 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This modern introduction to seismic data processing in both exploration and global geophysics demonstrates practical applications through real data and tutorial examples. The underlying physics and mathematics of the various seismic analysis methods are presented, giving students an appreciation of their limitations and potential for creating models of the sub-surface. Designed for a one-semester course, this textbook discusses key techniques within the context of the world's ever increasing need for petroleum and mineral resources - equipping upper undergraduate and graduate students with the tools they need for a career in industry. Examples presented throughout the text allow students to compare different methods and can be demonstrated using the instructor's software of choice. Exercises at the end of sections enable students to check their understanding and put the theory into practice and are complemented by solutions for instructors and additional case study examples online to complete the learning package.
Download or read book Complexity of Seismic Time Series written by Tamaz Chelidze and published by Elsevier. This book was released on 2018-05-21 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity of Seismic Time Series: Measurement and Application applies the tools of nonlinear dynamics to seismic analysis, allowing for the revelation of new details in micro-seismicity, new perspectives in seismic noise, and new tools for prediction of seismic events. The book summarizes both advances and applications in the field, thus meeting the needs of both fundamental and practical seismology. Merging the needs of the classical field and the very modern terms of complexity science, this book covers theory and its application to advanced nonlinear time series tools to investigate Earth's vibrations, making it a valuable tool for seismologists, hazard managers and engineers. - Covers the topic of Earth's vibrations involving many different aspects of theoretical and observational seismology - Identifies applications of advanced nonlinear time series tools for the characterization of these Earth's signals - Merges the needs of geophysics with the applications of complexity theory - Describes different methodologies to analyze problems, not only in the context of geosciences, but also those associated with different complex systems across disciplines
Download or read book An Adaptive Automatic Phase picking and Epicenter Locating Program Based on Waveform Cross correlation and Its Application for Processing Seismic Data in New Mexico written by Wenzheng Yang and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Independent Study (M.S.)--New Mexico Institute of Mining and Technology, Department of Earth and Environmental Science, Geophysics, 2004.
Download or read book Routine Data Processing in Earthquake Seismology written by Jens Havskov and published by Springer Science & Business Media. This book was released on 2010-06-16 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to get a practical understanding of the most common processing techniques in earthquake seismology. The book deals with manual methods and computer assisted methods. Each topic will be introduced with the basic theory followed by practical examples and exercises. There are manual exercises entirely based on the printed material of the book, as well as computer exercises based on public domain software. Most exercises are computer based. The software used, as well as all test data are available from http://extras.springer.com. This book is intended for everyone processing earthquake data, both in the observatory routine and in connection with research. Using the exercises, the book can also be used as a basis for university courses in earthquake processing. Since the main emphasis is on processing, the theory will only be dealt with to the extent needed to understand the processing steps, however references will be given to where more extensive explanations can be found. Includes: • Exercises • Test data • Public domain software (SEISAN) available from http://extras.springer.com
Download or read book Covariance Analysis for Seismic Signal Processing written by R. Lynn Kirlin and published by SEG Books. This book was released on 1999 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rather than address one seismic data-processing problem and present several methods, this book presents one fundamental methodology - analysis of the sample covariance matrix - and many seismic data problems to which it applies, providing the geophysical signal analyst with sufficient material to understand the usefulness of this approach.
Download or read book Model Based Signal Processing written by D. Harris and published by . This book was released on 2006 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent applications of correlation methods to seismological problems illustrate the power of coherent signal processing applied to seismic waveforms. Examples of these applications include detection of low amplitude signals buried in ambient noise and cross-correlation of sets of waveforms to form event clusters and accurately measure delay times for event relocation and/or earth structure. These methods rely on the exploitation of the similarity of individual waveforms and have been successfully applied to large sets of empirical observations. However, in cases with little or no empirical event data, such as aseismic regions or exotic event types, correlation methods with observed seismograms will not be possible due to the lack of previously observed similar waveforms. This study uses model-based signals computed for three-dimensional (3D) Earth models to form the basis for correlation detection. Synthetic seismograms are computed for fully 3D models estimated from the Markov Chain Monte-Carlo (MCMC) method. MCMC uses stochastic sampling to fit multiple seismological data sets. Rather than estimate a single ''optimal'' model, MCMC results in a suite of models that sample the model space and incorporates uncertainty through variability of the models. The variability reflects our ignorance of Earth structure, due to limited resolution, data and modeling errors, and produces variability in the seismic waveform response. Model-based signals are combined using a subspace method where the synthetic signals are decomposed into an orthogonal basis by singular-value decomposition (SVD) and the observed waveforms are represented with a linear combination of a sub-set of eigenvectors (signals) associated with the most significant eigenvalues. We have demonstrated the method by modeling long-period (80-10 seconds) regional seismograms for a moderate (M{approx}5) earthquake near the China-North Korea border. Synthetic seismograms are computed with the Spectral Element Method for a suite of long-wavelength (2 degree) seismic velocity models based on the MCMC method. We are working on higher resolution (1 degree) models for the same region and methods to increase the frequency content of the synthetic seismograms.
Download or read book Advances in Seismic Event Location written by Cliffort H. Thurber and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Seismic Event Location provides a broad overview of the fundamental issues involved in seismic event location, and presents a variety of state-of-the-art location methods and applications at a wide range of spatial scales. Three important themes in the book are: seismic monitoring for a Comprehensive Nuclear-Test-Ban Treaty (CTBT), seismic event location in three-dimensional Earth models, and methods for multiple-event location. Each chapter contains background material to help readers less familiar with the topics covered, as well as to provide abundant references for readers interested in probing deeper into a topic. However, most of the emphasis is on recent advances in methodology and their application. Audience: The book is intended primarily for academic and professional researchers and graduate students in seismology.
Download or read book Instrumentation in Earthquake Seismology written by Jens Havskov and published by Springer Science & Business Media. This book was released on 2010-02-11 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is unique and comprehensive coverage of modern seismic instrumentation, based on the authors’ practical experience of a quarter-century in seismology and geophysics. Their goal is to provide not only detailed information on the basics of seismic instruments but also to survey equipment on the market, blending this with only the amount of theory needed to understand the basic principles. Seismologists and technicians working with seismological instruments will find here the answers to their practical problems. Instrumentation in Earthquake Seismology is written to be understandable to the broad range of professionals working with seismological instruments and seismic data, whether students, engineers or seismologists. Whether installing seismic stations, networks and arrays, working and calibrating stationary or portable instruments, dealing with response information, or teaching about seismic instruments, professionals and academics now have a practical and authoritative sourcebook. Includes: SEISAN and SEISLOG software systems that are available from http://extras.springer.com and http://www.geo.uib.no/seismo/software/software.html
Download or read book The Polarization Method of Seismic Exploration written by E.I. Galperin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: variegated seismological conditions has been accumulated. The method has been developed further in two main directions: - the perfection of the techniques and equipment of three-component field studies incorporating a continuous control of the identity of equipment both in deep boreholes and on the surface; - the creation of efficient and straightforward software for the automatic processing of PM data. Whereas the early stages of development of the method have been conspicuous chiefly by the use of polarization for the discrimination of the wave field, in recent years the emphasis shifts to the use of polarization parameters to obtain additional information about the Earth. This is especially important, as the polarization parameters are very sensitive to inhomogeneities in cross-section and enable those parameters of the Earth to be studies which cannot be obtained from kinematics. Here one should especially mention the polarization of transverse waves, which can act as one of the most reliable parameters for identifying and studying anisotropic properties of the Earth. At present various modifications of PM are being developed applicable both to uphole - (PM RW = reflected waves method, PM CDP = common-depth-point method, PM refracted-wave method, PM of regional studies utilizing earthquakes) and to downhole observations (PM VSP = vertical seismic profiling). Not all the PM modifications are developing at the same rate. The method which has up to now been developed most extenSively is PM VSP.
