Download or read book Copper Indium Gallium Selenide Thin Film Solar Cells written by Yang Tang and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The solar energy as one of the new energy sources and a regenerated energy is abundant and pollution-free. Most photovoltaic devices (solar cells) sold in the market today are based on silicon wafers, the so-called first generation" technology. The market at present is on the verge of switching to a "second generation" of thin film solar cell technology which offers prospects for a large reduction in material costs by eliminating the costs of the silicon wafers. Cadmium telluride (CdTe).

Download or read book Photoenergy and Thin Film Materials written by Xiao-Yu Yang and published by John Wiley & Sons. This book was released on 2019-03-19 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest research & developments and future trends in photoenergy and thin film materials—two important areas that have the potential to spearhead the future of the industry. Photoenergy materials are expected to be a next generation class of materials to provide secure, safe, sustainable and affordable energy. Photoenergy devices are known to convert the sunlight into electricity. These types of devices are simple in design with a major advantage as they are stand-alone systems able to provide megawatts of power. They have been applied as a power source for solar home systems, remote buildings, water pumping, megawatt scale power plants, satellites, communications, and space vehicles. With such a list of enormous applications, the demand for photoenergy devices is growing every year. On the other hand, thin films coating, which can be defined as the barriers of surface science, the fields of materials science and applied physics are progressing as a unified discipline of scientific industry. A thin film can be termed as a very fine, or thin layer of material coated on a particular surface, that can be in the range of a nanometer in thickness to several micrometers in size. Thin films are applied in numerous areas ranging from protection purposes to electronic semiconductor devices. The 16 chapters in this volume, all written by subject matter experts, demonstrate the claim that both photoenergy and thin film materials have the potential to be the future of industry.

Download or read book Fabrication of Thin film Copper Indium Gallium Selenide CIGS Solar Cells for Space based Assets written by Joel P. Freyenhagen (CAPT, USAF.) and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Efficiency Enhancement of Copper Indium Gallium Di selenide Thin Film Solar Cell Using Optimez Material Propeties written by Nima Khoshsirat and published by . This book was released on 2014 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Copper Zinc Tin Sulfide Based Thin Film Solar Cells written by Kentaro Ito and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and toxicity issues. The device performance of CZTS-based thin film solar cells has been steadily improving over the past 20 years, and they have now reached near commercial efficiency levels (10%). These achievements prove that CZTS-based solar cells have the potential to be used for large-scale deployment of photovoltaics. With contributions from leading researchers from academia and industry, many of these authors have contributed to the improvement of its efficiency, and have rich experience in preparing a variety of semiconducting thin films for solar cells.

Download or read book Characterization of Photocurrent and Voltage Limitations of Copper indium Gallium selenide Thin film Polycrystalline Solar Cells written by Christopher P. Thompson and published by ProQuest. This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film polycrystalline CdS/Cu(In, Ga)(Se, S) 2 solar cells have great potential as a candidate for high efficiency, high throughput, low cost production. Cu(In, Ga)Se 2 devices have laboratory efficiencies approaching 20% and module efficiencies around 11%. However, most progress in device optimization has been the result of empirical studies; little is known about the device defect structure, and even less is known about the control of defects within the Cu(In, Ga)(Se, S) 2 absorber. Despite years of study, the complex nature of the Cu(In, Ga)(Se, S) 2 system has made progress towards a fundamental understanding of device behavior, and limiting defects a slow affair. The goal of this work is to shed further light on the nature of the limitations on photocurrent and voltage. The main topics covered in this thesis are: (1) fitting quantum efficiency curves calculated from an analytical model to measured quantum efficiency curves, and (2) Open circuit voltage temperature measurements. For the first section, series of devices with varying absorber layers will be analyzed, using the minority carrier diffusion length as the only fitting parameter. All other variables within the model will be supplied from direct and indirect measurements. We show that by using quantum efficiency, capacitance-voltage, and current-voltage measurements, we can generate excellent fits using only diffusion length as a fitting parameter. It is found that for Cu(In, Ga)Se 2 devices with E G [approximate]1.2eV, L=1000-1500nm.; for wide bandgap devices, with E G [approximate]1.4eV, L=10-400nm; for devices with E G [approximate]1.2eV, deposited with a low substrate temperature, L=650nm. Wide bandgap devices long wavelength collection is limited by minority carrier diffusion. For the second section, V OC (T) measurements are taken on devices with a wide range of absorbers, including some previously un-measured devices; absorbers grown with a Na deficiency. Analysis will focus on the activation energy of the dominant recombination mechanism, as well as low temperature saturation of V OC . Both of these parameters shed light on the limiting properties of devices. Cu(In, Ga)Se 2 with bandgap ranging from 1.2eV-1.4eV are limited by Shockley Read Hall recombination, and have a ratio of saturation voltage to bandgap of 80%. Lowering the electrical quality of the absorber by depositing the Cu(In, Ga)Se 2 layer at lower substrate temperature decreases the ratio of saturation voltage to bandgap to 64%, as a result of increased bandtail defect states. CuInS 2 devices and Cu(In, Ga)Se 2 devices with low or no Na are limited by hetero-interface recombination, and have a saturation voltage to bandgap ratio of ~60%.

Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvest energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for their notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, environment, and economy friendly and operational costs are quite low compared to other forms of power generation. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Aiming at large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents.

Download or read book Chemical and Electronic Characterization of Copper Indium Gallium Diselenide Thin Film Solar Cells and Correlation of These Characteristics to Solar Cell Operation written by Michael Justin Hetzer and published by . This book was released on 2009 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This dissertation embodies solid state physics research to understand the basic physical mechanisms underlying the movement of charge inside solar cells, in particular, the high efficiency copper indium gallium diselenide (CIGS) solar cell. The fundamental physics of the operation of these complex polycrystalline alloys remains incompletely understood. CIGS based solar cells have obtained conversion efficiencies of nearly 20%. Solar cells based on this material have been examined in this work using high resolution, atomic scale techniques to better understand the fundamental operation of these solar cells as well as correlating these basic properties to the operation of the finished full solar cell devices. Auger Electron Spectroscopy (AES) measurements of the chemical composition taken with nanometer resolution in an ultra high vacuum secondary electron microscope show evidence for compositional changes at the grain boundaries of the CIGS layer. These findings support theoretical calculations that predict higher solar cell performance as a result. Additionally, measurements have been taken with cathodoluminescence spectroscopy (CLS) studying the band structure locally within the CIGS layers. Significant variation is present in the resulting spectra, even within single grains indicating improved uniformity could be a path to better solar cell operation. Attempts to correlate the chemical composition and the energy band structure using AES and CLS measurements have yielded some interesting initial results but more work remains to be done to obtain a deeper understanding of the physics involved in these solar cells. Correlations have been observed between the energy band structure and the performance parameters of the solar cell, such as efficiency. These results indicate the possibility of alloying between the different layers of the solar cell and also that this intermixing is detrimental to the performance of the solar cell. This work has revealed important fundamental characteristics of these materials regarding changes in the atomic composition and energy band structure and how these changes influence the performance of the CIGS layer.

Download or read book Recycling and Recovery of Valuable Materials from Thin Film Solar Cells From Copper Indium Gallium Selenide Solar Panels to Perovskite Solar Cells written by Fan-Wei Liu and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Thin Film Solar Cells written by I. M. Dharmadasa and published by CRC Press. This book was released on 2018-09-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar energy conversion plays a very important role in the rapid introduction of renewable energy, which is essential to meet future energy demands without further polluting the environment, but current solar panels based on silicon are expensive due to the cost of raw materials and high energy consumption during production. The way forward is to move towards thin-film solar cells using alternative materials and low-cost manufacturing methods. The photovoltaic community is actively researching thin-film solar cells based on amorphous silicon, cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and dye-sensitised and organic materials. However, progress has been slow due to a lack of proper understanding of the physics behind these devices. This book concentrates on the latest developments and attempts to improve our understanding of solid-state device physics. The material presented is mainly experimental and based on CdTe thin-film solar cells. The author extends these new findings to CIGS thin-film solar cells and presents a new device design based on graded bandgap multi-layer solar cells. This design has been experimentally tested using the well-researched GaAs/AlGaAs system, and initial devices have shown impressive device parameters. These devices are capable of absorbing all radiation (UV, visible and infra-red) within the solar spectrum and combine "impact ionisation" and "impurity photovoltaic" effects. The improved device understanding presented in this book should impact and guide future photovoltaic device development and low-cost thin-film solar panel manufacture. This new edition features an additional chapter besides exercises and their solutions, which will be useful for academics teaching in this field.

Download or read book A Study of Hot Carrier Copper Indium Gallium Diselenide Based Thin Film Solar Cells written by Yige Hu and published by . This book was released on 2013 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments were performed on the national renewable energy laboratory (NREL) conventional solar cell SC1. Comparison of the current-voltage relationships of CIGS illuminated under low energy and high energy photon wavelengths shows evidence of hot carriers contributing to the collection. A modified Shockley lucky electron model is developed to extract the initial carrier energies and the phonon mean free paths by applying the hot carrier concept to the traditional thin film CIGS cell design. An improvement using the hot carrier theory is made by imbedding the traditional design with a barrier between the buffer layer and absorber layer for blocking the cold diffusion carriers while allowing most hot carriers to pass through. A barrier consisting of Zn0.3Cd0.7S is proposed for optimal effectiveness.

Download or read book Preparation and Characterization of Silver Copper Indium Gallium Diselenide Thin film Solar Cells written by 吳俊杰 and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Handbook of Photovoltaics written by Augustin McEvoy and published by Academic Press. This book was released on 2012 with total page 1269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook opens with an overview of solar radiation and how its energy can be tapped using photovoltaic cells. Other chapters cover the technology, manufacture and application of PV cells in real situations. The book ends by exploring the economic and business aspects of PV systems.

Download or read book New Materials for Thin Film Solar Cells written by Senthil T S and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film technology has a world-wide reputation in the field of thin film deposition process and also it paves a way for innovative techniques in large scale applications. Modern thin film technology has evolved into a sophisticated way to increase the performance and esthetic value for making new functional devices. One such application is search of new materials for thin film solar cells as it provides the solution for the today,Äôs concern of energy crisis. Depending on the processing technology solar cells are of various types. Among them, silicon wafer solar cells and thin film solar cells are most promising. Thin film technology has made solar cells more feasible to be employed in terms of device design and fabrication. The efficiencies produced by these solar cells still need to be improved. For this many investigations for further improvement from CIGS (copper indium gallium selenide) solar cell to dye sensitized solar cells and perovskite solar cells. Due to toxic nature and environmental impact the use of lead in perovskite solar cells are replaced by tin or some materials which would equalize the achieved efficiency of lead. Hence the developments in search of innovative materials continue its path in thin film solar cells to develop the photovoltaic field by enhancing its efficiency.

Download or read book Polycrystalline Thin Film Research Copper Indium Gallium Diselenide written by and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper indium gallium diselenide (CIGS) solar cells are one of the primary focuses of research by the Thin Film Material Science and Processing Group. The group develops processes and materials related to thin-film polycrystalline photovoltaic (PV) devices as well as the equipment required for routine analysis of these devices and materials. We work closely with other groups in the Materials Science Center to achieve a deeper understanding of thin-film materials and devices.

Download or read book Optical and Photovoltaic Properties of Copper Indium gallium Diselenide Materials and Solar Cells written by Puruswottam Aryal and published by . This book was released on 2014 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for clean and renewable energy sources in recent years has motivated research on the development of low cost, thin film photovoltaic devices. As a consequence, tools for the investigation and characterization of thin film photovoltaic component materials and devices, which can be implemented in real time as well as under in-line and off-line measurement conditions, are becoming increasingly important. Real time spectroscopic ellipsometry (RTSE) and ex-situ mapping spectroscopic ellipsometry (SE) are powerful characterization tools suitable for applications in the optimization of device performance and the evaluation of thin film photovoltaics technology scale-up from dot cell sizes in research laboratories to full module sizes in factories. These non-destructive optical probes implement multichannel spectroscopic detection for achieving high measurement speed, while simultaneously yielding high precision light-matter interaction parameters. The interaction parameters can be analyzed to obtain layer thicknesses as well as their optical properties from which material properties such as composition can be determined. The layer thicknesses and their optical properties in turn provide insights into the fraction of incident light absorbed in the active layer of the solar cell and also provide a basis for short-circuit current optimization through optical simulations. In this dissertation research, Cu(In, Ga)Se2 films with different Ga contents have been prepared by a one stage co-evaporation process. These films have been studied by spectroscopic ellipsometry (RTSE) in real time during their deposition, which has been performed at high temperature (570oC). After cooling the films to room temperature, in-situ SE measurements were undertaken in order to extract the dielectric functions of the thin film materials. An extended parameterization was established through the fitting of these dielectric functions to analytical functions, followed by the development of expressions in the free parameters that describe these analytical functions versus the Ga content. As a result of this parameterization, dielectric function spectra can be predicted for any desired composition. This capability was applied for the structural and compositional mapping of CIGS thin films and solar cells deposited over 10 cm × 10 cm substrate areas. Correlations of the deduced structural and compositional parameters with the corresponding device performance characteristics have yielded important insights with the potential to assist in the optimization of solar cell devices incorporating thin CIGS layers. In addition, a methodology of external quantum efficiency simulation (EQE) has been developed that relies on ex-situ spectroscopic ellipsometry analysis of complete thin film solar cells and so does not require free parameters. The simulations have been applied to CIGS and a-Si:H solar cells, based on the assumption that all photo-generated carriers within the active layers of these cells are collected without any recombination losses. Thus, it should be noted the predicted EQE is the maximum that the solar cell having the given structure can generate, and the difference between the predicted and measured EQE for the same device can provide insights into recombination losses in the device. Because the predicted EQE is based on specular interfaces, it can also be lower than the measured values due to light trapping caused by rough surfaces and interfaces. In another research area of interest for CIGS materials and solar cells, the role of the stage II/III substrate temperature (540oC - 640oC) in the deposition of the films by the three stage process has been studied, as has its effect on device performance, sodium diffusion, and grain size. Since standard soda-lime glass does not tolerate temperatures above 570oC due to glass softening, specially engineered high temperature soda-lime glass produced by Nippon Electric Glass Co., Japan was used as the substrate material in this study. It was found that the average device performance improves up to 620oC as a consequence of reduced shunting and improved diode quality factor which affect the fill factor of the device. At 640oC, however, these parameters have exhibited a wider distribution, and thus have yielded a lower average efficiency for the cells. SEM micrographs of these devices showed that the grain size first increased with increasing temperature up to 620oC, and then showed a bimodal distribution at 640oC. Finally, ex-situ mapping ellipsometry has been applied in the study of silver nanoparticle thin films prepared by the drop casting method. These films are important because of the plasmonic effects they exhibit. Such effects can be exploited by integrating the nanoparticle layers into solar cells in order to promote light trapping, and hence, increase the overall efficiency of the cells. A study of these films with mapping spectroscopic ellipsometry provides a means of determining thickness uniformity over large areas that is critical for scale-up of the deposition processes. The uniformity of other parameters of the films such as the plasmon resonance energy and its broadening are equally important to ensure maximum coupling of light into the solar cell absorber layer.

Download or read book Preparation and Characterization of Copper Indium Gallium Diselenide Films Used in the Absorber Layers of Thin film Solar Cells written by 陳富珊 and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: