Download or read book Copper and Its Alloys written by Edward George West and published by Ellis Horwood. This book was released on 1982 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper Alloys written by Luca Collini and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper has been used for thousands of years. In the centuries, both handicraft and industry have taken advantage of its easy castability and remarkable ductility combined with good mechanical and corrosion resistance. Although its mechanical properties are now well known, the simple f.c.c. structure still makes copper a model material for basic studies of deformation and damage mechanism in metals. On the other hand, its increasing use in many industrial sectors stimulates the development of high-performance and high-efficiency copper-based alloys. After an introduction to classification and casting, this book presents modern techniques and trends in processing copper alloys, such as the developing of lead-free alloys and the role of severe plastic deformation in improving its tensile and fatigue strength. Finally, in a specific section, archaeometallurgy techniques are applied to ancient copper alloys. The book is addressed to engineering professionals, manufacturers and materials scientists.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Woodhead Publishing. This book was released on 2007-05-17 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships' hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures.Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials.
Download or read book Copper and Copper Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a comprehensive guide to the selection and applications of copper and copper alloys, which constitute one of the largest and most diverse families of engineering materials. The handbook includes all of the essential information contained in the ASM Handbook series, as well as important reference information and data from a wide variety of ASM publications and industry sources.
Download or read book Copper Brass and Bronze Surfaces written by L. William Zahner and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A FULL-COLOR GUIDE FOR ARCHITECTS AND DESIGN PROFESSIONALS TO THE SELECTION AND APPLICATION OF COPPER, BRASS, AND BRONZE Copper, Brass, and Bronze Surfaces, third in Zahner's Architectural Metals Series, provides a comprehensive and authoritative treatment of copper, brass, and bronze applications in architecture and art. If offers architecture and design professionals the information they need to ensure proper maintenance and fabrication techniques through detailed information and full-color images. It covers everything from the history of the metals and choosing the right alloy, to detailed information on a variety of surface and chemical finishes and corrosion resistance. The book also features case studies that offer strategies for designing and executing successful projects using copper, brass, and bronze. Copper, Brass, and Bronze Surfaces is filled with illustrated case studies that present comprehensive coverage of how each metal is used in creating surfaces for building exteriors, interiors, and art finishes. All the books in Zahner's Architectural Metals Series offer in-depth coverage of today's most commonly used metals in architecture and art. This visual guide: Features full-color images of a variety of copper, brass, and bronze finishes, colors, textures, and forms Includes case studies with performance data that feature strategies on how to design and execute successful projects using copper, brass, and bronze Offers methods to address corrosion, before and after it occurs Explains the significance of the different alloys and the forms available to the designer Discusses what to expect when using copper, brass, and bronze in various exposures Written for architecture professionals, metal fabricators and developers, architecture students, designers, and artists working with metals, Copper, Brass, and Bronze Surfaces offers a logical framework for the selection and application of copper, brass, and bronze in all aspects of architecture.
Download or read book Springer Handbook of Condensed Matter and Materials Data written by Werner Martienssen and published by Springer Science & Business Media. This book was released on 2006-09-21 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Springer Handbook of Condensed Matter and Materials Data provides a concise compilation of data and functional relationships from the fields of solid-state physics and materials in this 1200 page volume. The data, encapsulated in 914 tables and 1025 illustrations, have been selected and extracted primarily from the extensive high-quality data collection Landolt-Börnstein and also from other systematic data sources and recent publications of physical and technical property data. Many chapters are authored by Landolt-Börnstein editors, including the prominent Springer Handbook editors, W. Martienssen and H. Warlimont themselves. The Handbook is designed to be useful as a desktop reference for fast and easy retrieval of essential and reliable data in the lab or office. References to more extensive data sources are also provided in the book and by interlinking to the relevant sources on the enclosed CD-ROM. Physicists, chemists and engineers engaged in fields of solid-state sciences and materials technologies in research, development and application will appreciate the ready access to the key information coherently organized within this wide-ranging Handbook. From the reviews: "...this is the most complete compilation I have ever seen... When I received the book, I immediately searched for data I never found elsewhere..., and I found them rapidly... No doubt that this book will soon be in every library and on the desk of most solid state scientists and engineers. It will never be at rest." -Physicalia Magazine
Download or read book Copper and Copper Base Alloys written by Richard Alfred Wilkins and published by . This book was released on 2013-04 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Corrosion of Copper Tin and Their Alloys written by Henry Leidheiser and published by . This book was released on 1971 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper written by Günter Joseph and published by ASM International. This book was released on 1998-12-31 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the technical and commercial considerations regarding the viability of copper for engineering applications. Further, this work presents representative numerical data selected from the scientific literature as well as data collected from industrial sources from around the world.
Download or read book Beyond Provenance written by A. M. Pollard and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last 180 years, scientists have been attempting to determine the 'provenance' (geological source) of the copper used in Bronze Age artefacts. However, despite advances in analytical technologies, the theoretical approach has remained virtually unchanged over this period, with the interpretative methodology only changing to accommodate the increasing capacity of computers. This book represents a concerted effort to think about the composition of Bronze Age metal as the product of human intentionality as well as of geology. It considers the trace element composition of the metal, the alloying elements, and the lead isotopic composition, showing how a combination of these aspects, along with archaeological context and typology, can reveal much more about the life history of such artefacts, expanding considerably upon the rather limited ambition of knowing where the ore was extracted.
Download or read book Radiation in Art and Archeometry written by D.C. Creagh and published by Elsevier. This book was released on 2000-06-14 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: /inca/publications/misc/creaghcov.htmAbout the cover This book contains twenty chapters covering a wide range of research in the fields of scientific conservation of art and archaeometry. The common thread is the use of radiation in these analyses. The term "radiation" is used in the widest possible sense. The book encompasses the use of electromagnetic radiation in its microwave, infrared, visible, ultraviolet, x ray and &ggr; ray forms and the use of particulate forms such as electrons, neutrons and charged particles for which the Planck's Law relation applies. In many cases there is an interplay between the two forms: for example, proton induced x ray emission (PIXE), secondary ion mass spectrometry (SIMS). As far as possible the chapters have been arranged in order of ascending particle energy. Thus it commences with the use of microwaves and finishes with the use of &ggr; rays. The authors were chosen on the basis of their expertise as practitioners of their particular field of study. This means that, for example, the mature fields of study such as the IR and UV study of paintings have been written by senior researchers, whereas for the emerging fields of synchrotron and neutron techniques the chapters have been written by talented researchers at the commencement of their careers.
Download or read book Corrosion Resistance of Copper and Copper Alloys written by Michael Schütze and published by Wiley-VCH. This book was released on 2011-11-30 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and its alloys have been utilized for more than 10,000 years. Today, copper is one of the most commonly used metals in the world; 24 million tons are consumed worldwide. A wide variety of copper alloys are used in a range of applications. As well as good mechanical properties, the excellent electrical conductivity and thermal conduction are reasons copper alloys are deployed in many industrial fields. Copper plays a role in electronic and electrical applications and all forms of heat transfer. In automobiles as well as in houses copper could not be replaced. In the sanitary industry copper and brass are well established, for example, drinking water pipes have been used for decades without problems. While the corrosion resistance of copper and its alloys is excellent in unpolluted air and drinking water, corrosion rates in impure environments can be much higher and lead to severe material damage. Corrosion is a system property, so it is important to find the right copper material with regard to the environmental conditions it will be exposed to. This handbook highlights the limitations of the use of copper and its alloys in various corrosive solutions and provides vital information on corrosion protection measures.
Download or read book Copper and Its Alloys in Engineering and Technology written by Copper Development Association and published by . This book was released on 1957 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper written by Allison Butts and published by . This book was released on 1954 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper and Its Alloys in Ancient India written by Dilip K. Chakrabarti and published by . This book was released on 1996 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrations: Numerous B/w Illustrations Description: This book offers a comprehensive discussion on the distribution of ores of copper and its alloys in the Indian subcontinent and critically reviews the related archaeological and metallurgical data, underscoring the tremendous richness and complexity of this tradition in early India. Summary: This volume undertakes a detailed study of the rich and continuing preindustrial tradition of Indian copper and copper-alloy metallurgy and unequivocally brings out its significance in understanding the ancient context.
Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics. Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
