Download or read book Copper and Copper Alloys Determination of Main Constituents and Impurities by Wavelength Dispersive X Ray Fluorescence Spectrometry XRF Guidelines to the Routine Method written by British Standards Institute Staff and published by . This book was released on 2006-11-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper, Copper alloys, Non-ferrous alloys, Chemical analysis and testing, Determination of content, Impurities, X-ray fluorescence spectrometry, Fluorimetry, Test equipment, Calibration, Control samples, Test specimens, Performance
Download or read book Copper and Copper Alloys Determination of Main Constituents and Impurities by Wavelength Dispersive X Ray Fluorescence Spectrometry XRF Routine Method written by British Standards Institute Staff and published by . This book was released on 2006-11-30 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper, Test specimens, Impurities, Calibration, Fluorimetry, Chemical analysis and testing, Determination of content, X-ray fluorescence spectrometry, Non-ferrous alloys, Copper alloys, Test equipment
Download or read book Handheld XRF in Cultural Heritage written by Aniko Bezur and published by . This book was released on 2019-05-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Methods for Geochemical Analysis written by Philip A. Baedecker and published by . This book was released on 1987 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.
Download or read book Energy Dispersive X ray Fluorescence Analysis written by Bohdan Dziunikowski and published by . This book was released on 1989 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Practical X Ray Fluorescence Analysis written by Burkhard Beckhoff and published by Springer Science & Business Media. This book was released on 2007-05-18 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray fluorescence analysis is an established technique for non-destructive elemental materials analysis. This book gives a user-oriented practical guidance to the application of this method. The book gives a survey of the theoretical fundamentals, analytical instrumentation, software for data processing, various excitation regimes including gracing incidents and microfocus measurements, quantitative analysis, applications in routine and micro analysis, mineralogy, biology, medicine, criminal investigations, archeology, metallurgy, abrasion, microelectronics, environmental air and water analysis. This book is the bible of X-Ray fluorescence analysis. It gives the basic knowledge on this technique, information on analytical equipment and guides the reader to the various applications. It appeals to researchers, analytically active engineers and advanced students.
Download or read book Handbook of X Ray Spectrometry written by Rene Van Grieken and published by CRC Press. This book was released on 2001-11-27 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Updates fundamentals and applications of all modes of x-ray spectrometry, including total reflection and polarized beam x-ray fluorescence analysis, and synchrotron radiation induced x-ray emission. Promotes the accurate measurement of samples while reducing the scattered background in the x-ray spectrum."
Download or read book X rays for Archaeology written by M. Uda and published by Springer Science & Business Media. This book was released on 2005-08-10 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of X-rays to objects of archaeology and insights into construction and chemical composition in a non-destructive manner date back to the discovery of radiation. This book contains measurement data taken with portable XRF and XRD, and data taken with accelerating ion beams and synchrotron radiations, and with their explanation.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co
Download or read book Sample Preparation for Trace Element Analysis written by Zoltan Mester and published by Elsevier. This book was released on 2003-12-16 with total page 1339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the collection of a sample, every analytical chemist will agree that its subsequent preservation and processing are of paramount importance. The availability of high performance analytical instrumentation has not diminished this need for careful selection of appropriate pretreatment methodologies, intelligently designed to synergistically elicit optimum function from these powerful measurement tools. Sample Preparation for Trace Element Analysis is a modern, comprehensive treatise, providing an account of the state-of-the art on the subject matter. The book has been conceived and designed to satisfy the varied needs of the practicing analytical chemist. It is a multi-author work, reflecting the diverse expertise arising from its highly qualified contributors. The first five chapters deal with general issues related to the determination of trace metals in varied matrices, such as sampling, contamination control, reference materials, calibration and detection techniques. The second part of the book deals with extraction and sampling technologies (totaling 15 chapters), providing theoretical and practical hints for the users on how to perform specific extractions. Subsequent chapters overview seven major representative matrices and the sample preparation involved in their characterization. This portion of the book is heavily based on the preceding chapters dealing with extraction technologies. The last ten chapters are dedicated to sample preparation for trace element speciation.- First title to provide comprehensive sample preparation information, dealing specifically with the analysis of samples for trace elements. - The 39 chapters are authored by international leaders of their fields.
Download or read book Infrared Spectroscopy in Conservation Science written by Michele R. Derrick and published by Getty Publications. This book was released on 2000-03-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical information on the use of infrared (IR) spectroscopy for the analysis of materials found in cultural objects. Designed for scientists and students in the fields of archaeology, art conservation, microscopy, forensics, chemistry, and optics, the book discusses techniques for examining the microscopic amounts of complex, aged components in objects such as paintings, sculptures, and archaeological fragments. Chapters include the history of infrared spectroscopy, the basic parameters of infrared absorption theory, IR instrumentation, analysis methods, sample collection and preparation, and spectra interpretation. The authors cite several case studies, such as examinations of Chumash Indian paints and the Dead Sea Scrolls. The Institute’s Tools for Conservation series provides practical scientific procedures and methodologies for the practice of conservation. The series is specifically directed to conservation scientists, conservators, and technical experts in related fields.
Download or read book Passive Nondestructive Assay of Nuclear Materials written by Doug Reilly and published by . This book was released on 1991 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical and Process Technology Encyclopedia written by Douglas M. Considine and published by McGraw-Hill Companies. This book was released on 1974 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings together in a single volume the many facets of inorganic, organic and physical chemistry, and of chemical, metallurgical and process engineering.
Download or read book A Consumer s Guide to Archaeological Science written by Mary E. Malainey and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many archaeologists, as primarily social scientists, do not have a background in the natural sciences. This can pose a problem because they need to obtain chemical and physical analyses on samples to perform their research. This manual is an essential source of information for those students without a background in science, but also a comprehensive overview that those with some understanding of archaeological science will find useful. The manual provides readers with the knowledge to use archaeological science methods to the best advantage. It describes and explains the analytical techniques in a manner that the average archaeologist can understand, and outlines clearly the requirements, benefits, and limitations of each possible method of analysis, so that the researcher can make informed choices. The work includes specific information about a variety of dating techniques, provenance studies, isotope analysis as well as the analysis of organic (lipid and protein) residues and ancient DNA. Case studies illustrating applications of these approaches to most types of archaeological materials are presented and the instruments used to perform the analyses are described. Available destructive and non-destructive approaches are presented to help archaeologists select the most effective technique for gaining the target information from the sample. Readers will reach for this manual whenever they need to decide how to best analyze a sample, and how the analysis is performed.
