Download or read book Coordinated Control of Multiple Robotic Manipulators Based on Differential Flatness written by Elisha Didam Markus and published by . This book was released on 2015 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses how multiple robot formations are required to share and synchronize information among themselves. This shared information may be in the form of relative positions, velocities or acceleration referred to as the robot states. Each robot state must asymptotically reach a common value which we may refer to as reaching consensus or synchronization. To achieve cooperation among the robots towards completing a given task, an effective coordinating control strategy is required. This will harness each robot in the network towards the goal at hand. One major limitation of model based synchronization control in robotics is that the dynamics considered are often approximated or typically too simple for modelling complex robotic scenarios. Higher order systems are reduced to lower order to enable easier analysis. Coordinating motion for a group of Multiple robots also means that the dynamics of the coupled robotic network becomes too large and almost intractable to solve. This research work seeks to apply differential flatness to improve coordination control of model based multi-robotic manipulators. The computational burden is thereby reduced since linear tools are employed to solve the nonlinear problem. In this study, the motion control problem of cooperating robots is formulated as follows: 1. Controllability and differential flatness analysis of robot ; 2. Motion/trajectory planning and controller design and 3. Synchronization control of multiple robot manipulators.
Download or read book Coordinated Control of Multiple Robotic Manipulators written by Jiabin Wang and published by . This book was released on 1996 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Robotic Manipulators with Contact and Friction written by Shiping Liu and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the friction, contact and impact on robot control and force feedback mechanism Dynamics and Control of Robotic Manipulators with Contact and Friction offers an authoritative guide to the basic principles of robot dynamics and control with a focus on contact and friction. The authors discuss problems in interaction between human and real or virtual robot where dynamics with friction and contact are relevant. The book fills a void in the literature with a need for a text that considers the contact and friction generated in robot joints during their movements. Designed as a practical resource, the text provides the information needed for task planning in view of contact, impact and friction for the designer of a robot control system for high accuracy and long durability. The authors include a review of the most up-to-date advancements in robot dynamics and control. It contains a comprehensive resource to the effective design and fabrication of robot systems and components for engineering and scientific purposes. This important guide: Offers a comprehensive reference with systematic treatment and a unified framework Includes simulation and experiments used in dynamics and control of robot considering contact, impact and friction Discusses the most current tribology methodology used to treat the multiple–scale effects Contains valuable descriptions of experiments and software used Presents illustrative accounts on the methods employed to handle friction in the closed loop, including the principles, implementation, application scope, merits and demerits Offers a cohesive treatment that covers tribology and multi-scales, multi-physics and nonlinear stochastic dynamics control Written for graduate students of robotics, mechatronics, mechanical engineering, tracking control and practicing professionals and industrial researchers, Dynamics and Control of Robotic Manipulators with Contact and Friction offers a review to effective design and fabrication of stable and durable robot system and components.
Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators. Sample Chapter(s). Chapter 1: Flexible-link Manipulators: Modeling, Nonlinear Control and Observer (235 KB). Contents: Flexible-Link Manipulators: Modeling, Nonlinear Control and Observer (M A Arteaga & B Siciliano); Energy-Based Control of Flexible Link Robots (S S Ge); Trajectory Planning and Compliant Control for Two Manipulators to Deform Flexible Materials (O Al-Jarrah et al.); Force Control of Flexible Manipulators (F Matsuno); Experimental Study on the Control of Flexible Link Robots (D Wang); Sensor Output Feedback Control of Flexible Robot Arms (Z-H Luo); On GA Based Robust Control of Flexible Manipulators (Z-Q Xiao & L-L Cui); Analysis of Poles and Zeros for Tapered Link Designs (D L Girvin & W J Book); Optimum Shape Design of Flexible Manipulators with Tip Loads (J L Russell & Y-Q Gao); Mechatronic Design of Flexible Manipulators (P-X Zhou & Z-Q Xiao); A Comprehensive Study of Dynamic Behaviors of Flexible Robotic Links: Modeling and Analysis (Y-Q Gao & F-Y Wang). Readership: Researchers, lecturers and graduate students in robotics & automated systems, electrical & electronic engineering, and industrial engineering
Download or read book Control of Robot Manipulators in Joint Space written by Rafael Kelly and published by Springer Science & Business Media. This book was released on 2007-12-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tutors can design entry-level courses in robotics with a strong orientation to the fundamental discipline of manipulator control pdf solutions manual Overheads will save a great deal of time with class preparation and will give students a low-effort basis for more detailed class notes Courses for senior undergraduates can be designed around Parts I – III; these can be augmented for masters courses using Part IV
Download or read book The Coordination of Multiple Robotic Manipulators written by Reed F. Young and published by . This book was released on 1987 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, the problem of the coordination of multiple robots is investigated at length. Included in the discussion are the position control, path planning, and collision avoidance strategies involved in the control of two robots mutually holding an object. The theories and algorithms presented in this thesis are tested and implemented in the computer simulation CoordSim. Major results from this thesis include a verification of the resolved position control theory as it drives the robots to any position and orientation. Also, a concatenation and adaption of various single robot theories is made and introduced as the Striving Technique. This solution is a complete movement algorithm which drives the two robots mutually holding an object through a field with obstacles. The algorithm also generates a path function given only the start and end positions and orientations. Finally, the concepts of the coordinated work envelope and twisting collision are derived and discussed. Keywords: Theses; Computer graphics.
Download or read book Adaptive Control for Robotic Manipulators written by Dan Zhang and published by CRC Press. This book was released on 2017-02-03 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotic mechanism and its controller make a complete system. As the robotic mechanism is reconfigured, the control system has to be adapted accordingly. The need for the reconfiguration usually arises from the changing functional requirements. This book will focus on the adaptive control of robotic manipulators to address the changed conditions. The aim of the book is to summarise and introduce the state-of-the-art technologies in the field of adaptive control of robotic manipulators in order to improve the methodologies on the adaptive control of robotic manipulators. Advances made in the past decades are described in the book, including adaptive control theories and design, and application of adaptive control to robotic manipulators.
Download or read book Multi Arm Cooperating Robots written by M.D. Zivanovic and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several consistent solutions for cooperative system control have recently been identified by the authors of the current monograph. This was achieved by solving three separate tasks that are essential for solving the problem of cooperative manipulation as a whole. The first task is related to the understanding of the physical nature of cooperative manipulation and finding a way for a sufficiently exact characterization of cooperative system statics, kinematics and dynamics. After successfully completing this task, in the frame of the second task, the problem of coordinated motion of the cooperative system is solved. Finally, as a solution to the third task, the control laws of cooperative manipulation are synthesized. The starting point in dealing with the above three tasks of cooperative manipulation was the assumption that the problem of force uncertainty in cooperative manipulation can be resolved by introducing elastic properties into the cooperative system, at least in the part where force uncertainty appears. In static and dynamic analysis of the elastic structure of cooperative systems the finite element method is applied. In contrast to the procedure used in the major part of the available literature where deformation work is expressed by deviations from the unloaded state of fixed elastic structure, in this monograph the deformation work is expressed by internal forces as a function of the absolute coordinates of contacts of mobile elastic structure. Coordinated motion and control in cooperative manipulation are solved as the problem of coordinated motion and control of a mobile elastic structure, taking into account the specific features of cooperative manipulation. Coordinated motion and control laws in cooperative manipulation are synthesized on the basis of a non-linear model where the problem of uncertainty is solved, which is not the case in the available literature. Simple examples demonstrate the consistent procedure of mathematical modeling and synthesis of nominal coordinated motion, as well as control of the cooperative system. This book will be useful to a wide audience of engineers, ranging from undergraduate and graduate students, new and advanced academic researchers, to practitioners (mechanical and electrical engineers, computer and system scientists). It is intended for readers whose work involves manufacturing, industrial, robotics, automation, computer and control engineering, and who wish to find out about this important new technology and its potential advantages for control engineering applications.
Download or read book Control of Coordinated Multiple Robot Manipulators written by Banu Kalaycioglu and published by . This book was released on 1991 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The theory of position control for coordinated multiple manipulator is studied. The main objective of this study is to develop a multiple arm load sharing (with minimum norms) position controller. (Abstract shortened by UMI.)" --
Download or read book Complex Systems Spanning Control and Computational Cybernetics Applications written by Peng Shi and published by Springer Nature. This book was released on 2022-09-18 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, dedicated to Professor Georgi M. Dimirovski on his anniversary, contains new research directions, challenges, and many relevant applications related to many aspects within the broadly perceived areas of systems and control, including signal analysis and intelligent systems. The project comprises two volumes with papers written by well known and very active researchers and practitioners. The first volume is focused on more foundational aspects related to general issues in systems science and mathematical systems, various problems in control and automation, and the use of computational and artificial intelligence in the context of systems modeling and control. The second volume is concerned with a presentation of relevant applications, notably in robotics, computer networks, telecommunication, fault detection/diagnosis, as well as in biology and medicine, and economic, financial, and social systems too.
Download or read book Informatics in Control Automation and Robotics written by Jean-Louis Ferrier and published by Springer Science & Business Media. This book was released on 2012-08-12 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the eighth "International Conference on Informatics in Control Automation and Robotics" (ICINCO 2011), held in Noordwijkerhout, The Netherlands, from 28 to 31 July 2011. The conference was organized in four simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation", "Signal Processing, Sensors, Systems Modeling and Control" and "Industrial Engineering, Production and Management". The book is based on the same structure. ICINCO received 322 paper submissions, not including those of workshops or special sessions, from 52 countries, in all continents. After a double blind paper review performed by the Program Committee only 33 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 10%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2011. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Download or read book Coordinated Control of Multiple Robotic Maniputators written by Jiabin Wang and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotic Manipulators and Vehicles written by Gerasimos Rigatos and published by Springer. This book was released on 2018-05-24 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.
Download or read book Interaction Control of Robot Manipulators written by Ciro Natale and published by Springer Science & Business Media. This book was released on 2003-01-08 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot interaction control is one of the most challenging targets for industrial robotics. While it would provide the robotic systems with a high degree of autonomy, its effectiveness is limited by the complexity of this problem and by the necessity of special sensors (six-dof force sensors). On the other hand, the control methodologies to be adopted for addressing this problem can be considered mature and well-assessed. All the known interaction control strategies (e.g. impedance, direct force control) are tackled and reshuffled in a geometrically consistent way for simplification of the task specification and enhancement of the execution performance. This book represents the first step towards the application of theoretical results at an industrial level; in fact each proposed control algorithm is experimentally tested here on an industrial robotic setup.
Download or read book Repetitive Motion Planning and Control of Redundant Robot Manipulators written by Yunong Zhang and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Repetitive Motion Planning and Control of Redundant Robot Manipulators presents four typical motion planning schemes based on optimization techniques, including the fundamental RMP scheme and its extensions. These schemes are unified as quadratic programs (QPs), which are solved by neural networks or numerical algorithms. The RMP schemes are demonstrated effectively by the simulation results based on various robotic models; the experiments applying the fundamental RMP scheme to a physical robot manipulator are also presented. As the schemes and the corresponding solvers presented in the book have solved the non-repetitive motion problems existing in redundant robot manipulators, it is of particular use in applying theoretical research based on the quadratic program for redundant robot manipulators in industrial situations. This book will be a valuable reference work for engineers, researchers, advanced undergraduate and graduate students in robotics fields. Yunong Zhang is a professor at The School of Information Science and Technology, Sun Yat-sen University, Guangzhou, China; Zhijun Zhang is a research fellow working at the same institute.
Download or read book Control of Robot Manipulators in Joint Space written by Rafael Kelly and published by Springer. This book was released on 2009-10-12 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tutors can design entry-level courses in robotics with a strong orientation to the fundamental discipline of manipulator control pdf solutions manual Overheads will save a great deal of time with class preparation and will give students a low-effort basis for more detailed class notes Courses for senior undergraduates can be designed around Parts I – III; these can be augmented for masters courses using Part IV
Download or read book Emerging Technologies for Developing Countries written by Muthoni Masinde and published by Springer Nature. This book was released on 2023-07-05 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed conference proceedings of the 5th International Conference on Emerging Technologies for Developing Countries, AFRICATEK 2022, held in Bloemfontein, South Africa, in December 5-7, 2022. The 14 full papers included in this book were carefully reviewed and selected from 24 submissions. They were organized in topical sections as follows: answer set programming; Education in the 4IR Era, Opportunities for driving Efficiencies and Effectiveness, Key 4IR Baseline Architectures, Application of 4IR in Environment and Agriculture Monitoring.
