Download or read book Cooperative Decision Making in Modular Product Family Design written by Marc Windheim and published by Springer Nature. This book was released on 2019-11-21 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of modular product families holds enormous economic potential for companies, as there are always great opportunities but also risks associated with all life phases of a product. However, these fundamental and far-reaching effects inevitably lead to conflicting objectives when defining modular product structures, which makes decision-making in product development particularly complex.Considering relevant theories from decision theory and product family design, this book presents an innovative method to support decision makers in the development of modular product families. The central element of the method is a novel Modularity Decision Dashboard (MDD), which interactively visualizes all decision-relevant data. The findings presented here confirm that applying the method to real-world decision-making problems leads to a more balanced ratio between internal and external variety, and thus significantly contributes to the efficient economic benefit of modularization.
Download or read book Performance simulation of modular product architectures by model based configuration written by Florian M. Dambietz and published by Springer Nature. This book was released on 2021-09-30 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of modular product architectures can significantly increase the efficiency in manufacturing companies. Various modularization methods are used in the development of these architectures, but they always result in different architecture alternatives. This thesis describes the development of a model-based simulation for multi-dimensional performance assessment of these architecture alternatives with their corresponding modular kits. The central element of this simulation is formed by a model-based configuration system, identifying individually valid product variants using concepts and tools of Model-based-systems-engineering (MBSE). Based on the developed Hyperspace algorithm, a geometric-mathematical solution approach, these variants are then evaluated considering multiple parameters. By recursively configuring multiple customer requests using alternative modular kits, an individual performance criterion of these alternatives can be generated, including customer-, market- and company parameters. This thesis describes the development of the performance simulation on the basis of a simplified explanation example. A validation based on customer-specific laser welding systems is also shown.
Download or read book Handbook of Research in Mass Customization and Personalization written by Frank T. Piller and published by World Scientific. This book was released on 2010 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of "long tail markets", exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands. The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields. Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Research in Mass Customization and Personalization written by Mitchell and published by World Scientific. This book was released on 2009-12-01 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of ';long tail markets';, exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands.The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields.Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Handbook Of Research In Mass Customization And Personalization In 2 Volumes Volume 1 Strategies And Concepts Volume 2 Applications And Cases written by Frank T Piller and published by World Scientific. This book was released on 2009-12-30 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of ';long tail markets';, exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands.The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields.Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Advances in Product Family and Product Platform Design written by Timothy W. Simpson and published by Springer Science & Business Media. This book was released on 2013-09-13 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design along with successful applications in industry. This book provides not only motivation for product family and product platform design (i.e., address questions about “why and when should we platform”) but also methods and tools to support the design and development of families of products based on shared platforms (i.e. address the “how” and “what” questions about platforming). It begins with a general overview of product family design to introduce the general reader to the topic and then progress to more advanced topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies for their company. Finally, successful industry applications provide readers and practitioners with case studies and “talking points” to become platform advocates and leaders within their organization.
Download or read book Advances in Mechanical Design written by Jianrong Tan and published by Springer Nature. This book was released on 2022-03-15 with total page 2373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on innovation, main objectives are to bring the community of researchers in the fields of mechanical design together; to exchange and discuss the most recent investigations, challenging problems and new trends; and to encourage the wider implementation of the advanced design technologies and tools in the world, particularly throughout China. The theme of 2021 ICMD is “Interdisciplinary and Design Innovation” and this conference is expected to provide an excellent forum for cross-fertilization of ideas so that more general, intelligent, robust and computationally economical mechanical design methods are created for multi-disciplinary applications.
Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer Science & Business Media. This book was released on 2005-09-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2005, held in Palma de Mallorca, Spain, in September 2005. The 28 revised full papers presented were carefully reviewed and selected from over 100 submissions. The papers cover all current issues in cooperative design, visualization, engineering, and other cooperative applications. Topics addressed are such as constraint maintenance, decision support, and security enforcement for CDVE. Case studies and application specific developments are among the cooperative visualization papers. Along the line of cooperative engineering, knowledge management, reconfigurability, and concurrency control are major issues addressed.
Download or read book Modular System Design and Evaluation written by Mark Sh. Levin and published by Springer. This book was released on 2014-09-06 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines seven key combinatorial engineering frameworks (composite schemes consisting of algorithms and/or interactive procedures) for hierarchical modular (composite) systems. These frameworks are based on combinatorial optimization problems (e.g., knapsack problem, multiple choice problem, assignment problem, morphological clique problem), with the author’s version of morphological design approach – Hierarchical Morphological Multicritieria Design (HMMD) – providing a conceptual lens with which to elucidate the examples discussed. This approach is based on ordinal estimates of design alternatives for systems parts/components, however, the book also puts forward an original version of HMMD that is based on new interval multiset estimates for the design alternatives with special attention paid to the aggregation of modular solutions (system versions). The second part of ‘Modular System Design and Evaluation’ provides ten information technology case studies that enriches understanding of the design of system design, detection of system bottlenecks and system improvement, amongst others. The book is intended for researchers and scientists, students, and practitioners in many domains of information technology and engineering. The book is also designed to be used as a text for courses in system design, systems engineering and life cycle engineering at the level of undergraduate level, graduate/PhD levels, and for continuing education. The material and methods contained in this book were used over four years in Moscow Institute of Physics and Technology (State University) in the author’s faculty course “System Design”.
Download or read book The Competitive Edge written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals. Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities: Advanced engineered materials that offer the prospect of better life-cycle performance and other gains. Equipment reliability and maintenance practices for better returns on capital investment. Rapid product realization techniques to speed delivery to the marketplace. Intelligent manufacturing control for improved reliability and greater precision. Building a workforce with the multidisciplinary skills needed for competitiveness. This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.
Download or read book Co oP written by Tung X. Bui and published by Springer. This book was released on 1987 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes an approach to analyzing, designing and implementing Group Decision Support Systems (GDSS). The experience gained in developing a concrete system, Co-oP, suggests that GDSS should be distributed, loosely-coupled and process-driven. A distributed and loosely-coupled GDSS architecture provides autonomy and flexibility for individual decision-making, and homogeneity and simplicity for group problem solving. Also, process-driven GDSS are able to deal with the unpredictable nature of group problems since collective decision processes have been shown to be the only elements in a GDSS that are (i) stable enough to fit into most collective problems, (ii) reasonably structurable to be implementable, and (iii) sufficiently controllable to guarantee appropriate use. From a Multiple Criteria Decision-Making (MCDM) viewpoint, this book supports the integrated use of various MCDM methods to help a GDSS (i) support a wide range of decision situations, (ii) attenuate the difficulty of information search, (iii) allow division of decision-making tasks, and (iv) permit consensus seeking analysis. Co-oP runs on a network of individual workstations. It contains a set of MCDM methods, techniques of aggregation of preferences, and a consensus seeking algorithm to support negotiation. Electronic communication among group members is monitored by a group norm filter which is adaptable to a large number of collective decision situations. This book also reports some empirical evaluations of Co-oP and expands the proposed approach to non-cooperation and organizational decision-making.
Download or read book Modular Product Development for Mass Customization written by Ahm Shamsuzzoha and published by . This book was released on 2010 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Automation and Intelligent Manufacturing The Human Data Technology Nexus written by Kyoung-Yun Kim and published by Springer Nature. This book was released on 2023-02-03 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the second volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it highlights advances in micro- and nanoscales processes, additive manufacturing, artificial intelligence and robotic applications, human-robot collaboration, as well as quality control, supply chain, industrial monitoring and management strategies. It also discusses important issues related to sustainability, waste management and remanufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation.
Download or read book Product Platform and Product Family Design written by Timothy W. Simpson and published by Springer Science & Business Media. This book was released on 2006-03-20 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses how product platform and product family design can be used successfully to increase variety within a product line, shorten manufacturing lead times, and reduce overall costs within a product line. The material serves as a reference and a hands-on guide for practitioners involved in the design, planning and production of products. Real-life case studies that explain the benefits of platform based product development are included.
Download or read book Decision Science for Future Earth written by Tetsukazu Yahara and published by Springer Nature. This book was released on 2021-01-29 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a theoretical framework and case studies on decision science for regional sustainability by integrating the natural and social sciences. The cases discussed include solution-oriented transdisciplinary studies on the environment, disasters, health, governance and human cooperation. Based on these case studies and comprehensive reviews of relevant works, including lessons learned from past failures for predictable surprises and successes in adaptive co-management, the book provides the reader with new perspectives on how we can co-design collaborative projects with various conflicts of interest and how we can transform our society for a sustainable future. The book makes a valuable contribution to the global research initiative Future Earth, promoting transdisciplinary studies to bridge the gap between science and society in knowledge generation processes and supporting efforts to achieve the UN’s Sustainable Development Goals (SDGs). Compared to other publications on transdisciplinary studies, this book is unique in that evolutionary biology is used as an integrator for various areas related to human decision-making, and approaches social changes as processes of adaptive learning and evolution. Given its scope, the book is highly recommended to all readers seeking an integrated overview of human decision-making in the context of social transformation.
Download or read book The Routledge Companion to Performance Management and Control written by Elaine Harris and published by Routledge. This book was released on 2017-08-15 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance management is key to the ongoing success of any organisation, allowing it to meet its strategic objectives by designing and implementing management control systems. This book goes beyond the usual discussion of performance management in accounting and finance, to consider strategic management, human behaviour and performance management in different countries and contexts. With a global mix of world-renowned researchers, this book systematically covers the what, the who, the where and the why of performance management and control (PMC) systems. A comprehensive, state-of-the-art collection edited by a leading expert in the field, this book is a vital resource for all scholars, students and researchers with an interest in business, management and accounting.
Download or read book Concurrent Engineering Fundamentals Integrated product development written by Biren Prasad and published by Prentice Hall. This book was released on 1996 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough, original guide to using Concurrent Engineering principles to develop products that meet customer needs -- and to do so as quickly and efficiently as possible.This book shows how CE encompasses manufacturing competitiveness, life-cycle management, process reengineering, cooperative workgroups, systems engineering, information modeling, and product, process and organization integration. This book also identifies, for the first time, 25 fundamental CE metrics and measures. These are categorized into four groups: simulations and analysis, product feasibility and quality assessment, design for X-ability assessment, and process quality assessment. The book describes the new process of Concurrent Function Deployment, which allows workgroups to work concurrently on conflicting values and compare notes and common checkpoints. Extensive exercises and illustrations are included throughout. Managers involved in any type of product development.
