Download or read book Thermal Design of Electronic Equipment written by Ralph Remsburg and published by CRC Press. This book was released on 2017-12-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a field where change and growth is inevitable, new electronic packaging problems continually arise. Smaller, more powerful devices are prone to overheating, causing intermittent system failures, corrupted signals, lower MTBF, and outright system failure. Since convection cooling is the heat transfer path most engineers take to deal with thermal problems, it is appropriate to gain as much understanding about the underlying mechanisms of fluid motion as possible. Thermal Design of Electronic Equipment is the only book that specifically targets the formulas used by electronic packaging and thermal engineers. It presents heat transfer equations dealing with polyalphaolephin (PAO), silicone oils, perfluorocarbons, and silicate ester-based liquids. Instead of relying on theoretical expressions and text explanations, the author presents empirical formulas and practical techniques that allow you to quickly solve nearly any thermal engineering problem in electronic packaging.
Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.
Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 1998-02-28 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: With today's high density, high performance electronic systems, packaging and more specifically thermal engineering has become the critical factor that limits on-time product introduction and reliability in the field. This book serves as a reference for engineers who must predict the thermal performance of a company's latest product as well as the technicians who must quickly solve the problem of an overheating chip in a product that is already on the shelves.
Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 1994-02-28 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.
Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of electronic packaging continues to grow at an amazing rate. To be successful in this field requires analytical skills, a foundation in mechanical engineering, and access to the latest developments in the electronics field. The emphasis for each project that the electronic packaging engineer faces changes from project to project, and from company to company, yet some constants should continue into the foreseeable future. One of these is the emphasis on ther mal design. Although just a few years ago thermal analysis of electronic equipment was an afterthought, it is becoming one of the primary aspects of many packaging jobs. It seems that the days of just adding a bigger fan to reduce the overheat ing problem are almost over. Replacing that thought is the up-front commitment to CFD (Computational Fluid Dynamics) software code, FEA (Finite Element Analysis) software, and the realization that the problem will only get worse. As the electronic circuit size is reduced, speed is increased. As the power of these systems increases and the volume allowed diminishes, heat flux or density (heat per unit area, W/m 2 or Btulh ft2) has spiraled. Much of the improvement in the reliability and packaging density of electronic circuits can be traced to advances in thermal design. While air cooling is still used extensively, advanced heat transfer techniques using exotic synthetic liquids are becoming more prominent, allowing still smaller systems to be manufactured. The appli cation of advanced thermal management techniques requires a background in fluid dynamics.
Download or read book Cooling Techniques for Electronic Equipment written by Dave S. Steinberg and published by . This book was released on 1980-11-07 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details methods for designing electronic hardware to withstand severe thermal environments without failing. Presents techniques for development of varied and reliable electronic systems without the necessity of high-speed digital computers. Also includes mathematical modeling techniques, using analog resistor networks, to provide for the breakup of complex systems into many individual thermal resistors and nodes, for those who prefer high-speed digital computer solutions to thermal problems. Uses both SI and English units throughout.
Download or read book Air Cooling Technology for Electronic Equipment written by Sung Jin Kim and published by CRC Press. This book was released on 2020-07-24 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear your bookcase of references containing bits and pieces of useful information and replace them with this thorough, single-volume guide to thermal analysis. Air Cooling Technology for Electronic Equipment is a helpful, practical resource that answers questions frequently asked by thermal and packaging engineers grappling with today's demand for increased thermal control in electronics. Superbly organized for quick reference, the book dedicates each chapter to answering fundamental questions, such as: What is the optimal spacing between the printed circuit boards? What is a good estimate of the heat transfer coefficient and the associate pressure drop for forced convection over package arrays? How are heat transfer and fluid flow characteristics in the entrance region different from those in the fully developed region? What is the effect of substrate conduction on convection cooling? The chapters, written by engineers and engineering educators who are experts in electronic cooling, are packed with details and present the latest developments in air cooling techniques and thermal design guidelines. They provide problem-solving analyses that are jargon-free, straightforward, and easy to understand. Air Cooling Technology for Electronic Equipment is a handy source of technical information for anyone who wants to get the most out of air cooling.
Download or read book Cooling and Thermal Design of Electronic Systems written by and published by . This book was released on 1995 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Heat Transfer written by Younes Shabany and published by CRC Press. This book was released on 2009-12-17 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuing trend toward miniaturization and high power density electronics results in a growing interdependency between different fields of engineering. In particular, thermal management has become essential to the design and manufacturing of most electronic systems.Heat Transfer: Thermal Management of Electronics details how engineers can use
Download or read book Thermal Management of Electronic Systems written by C.J. Hoogendoorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eurotherm Committee has chosen Thermal Management of Electronic Systems as the subject of its 29th Seminar, at Delft University of Technology, the Netherlands, 14-16 June 1993. This volume constitutes the proceedings of the Seminar. Thermal Management is but one of the several critical topics in the design of electronic systems. However, as a result of the combined effects of increasing heat fluxes, miniaturisation and the striving for zero defects, preferably in less time and at a lower cost than before, thermal management has become an increasingly tough challenge. Therefore, it is being increasingly recognised that cooling requirements could eventually hamper the technical progress in miniaturisation. It might be argued that we are on the verge of a revolution in thermal management techniques. Previously, a packaging engineer had no way of predicting the tempera tures of critical electronic parts with the required accuracy. He or she· had to rely on full-scale experiments, doubtful design rules, or worst-case estimates. This situation is going to be changed in the foreseeable future. User-friendly software tools, the acquisition and integrity of input and output data, the badly needed training mea sures, the introduction into a concurrent engineering environment: all these items will exert a heavy toll on the flexibility of the electronics industries. Fortunately, this situation is being realised at the appropriate management levels, and the interest in this seminar and the pre-conference tutorials testifies to this assertion.
Download or read book Fundamentals of Electronic Systems Design written by Jens Lienig and published by Springer. This book was released on 2017-04-25 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design of electronic systems from the ground up, from drawing and CAD essentials to recycling requirements. Chapter by chapter, it deals with the challenges any modern system designer faces: The design process and its fundamentals, such as technical drawings and CAD, electronic system levels, assembly and packaging issues and appliance protection classes, reliability analysis, thermal management and cooling, electromagnetic compatibility (EMC), all the way to recycling requirements and environmental-friendly design principles. "This unique book provides fundamental, complete, and indispensable information regarding the design of electronic systems. This topic has not been addressed as complete and thorough anywhere before. Since the authors are world-renown experts, it is a foundational reference for today’s design professionals, as well as for the next generation of engineering students." Dr. Patrick Groeneveld, Synopsys Inc.
Download or read book Advances in Thermal Modeling of Electronic Components and Systems written by Allan D. Kraus and published by . This book was released on 1993-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume opens with a sweeping overview of the physical design of electronic systems-methodology, technology, and future challenges-thermally induced failures in electronic systems. Subsequent chapters examine the causes for thermally induced failures of electronic components and the techniques used to analyze and prevent such failures. It gives a comprehensive bibliograhy of project managers and lead engineers, packaging engineers and mechanical analysts, consultants, and academic, industrial, and government laboratory researchers.
Download or read book Cooling of Electronic Equipment written by Allan W. Scott and published by Wiley-Interscience. This book was released on 1974 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Management for Opto electronics Packaging and Applications written by Xiaobing Luo and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.
Download or read book Cooling and Thermal Design of Electronic Systems written by Cristina H. Amon and published by . This book was released on 1995 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Manual of Natural Methods of Cooling Electronic Equipment written by James P. Welsh and published by . This book was released on 1962 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
