Download or read book Convection During High gravity Solidification written by Tracy Lynn Sayre and published by . This book was released on 1995 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Processing in High Gravity written by Liya L. Regel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two motives for studying materials processing in centrifuges. First, such research improves our understanding of the influence of acceleration and convection on materials processing. Second, there are commercial opportunities for production of unique and improved materials that cannot be prepared under normal earth conditions or in space. Through a combination of experiments and theory, we are gaining an understanding of centrifugation on phenomena of importance to materials processing. We find that it is necessary to consider not only acceleration, but also the Corio lis effect and the variation of acceleration with position. As one consequence, the vigor of buoyancy-driven convection is sometimes increased by centrifugation and sometimes decreased. Similarly, the tendency of the convection to become unstable or oscillatory may either be increased or decreased by centrifugation. On the other hand, the observed effects of centrifugation on product quality have largely gone unexplained. This volume constitutes the proceedings of The Second International Workshop on Materials Processing at High Gravity, hosted by Clarkson University in June of 1993. The concept for a workshop on materials processing in centrifuges was born at a series of informal meetings held in Paris in 1990. The First International Workshop on Materials Processing at High Gravity was held in May of 1991 in Dubna, USSR, on the banks of the Volga River. The proceedings of this workshop was published in 1992 as a special issue of the Journal of Crystal Growth.

Download or read book The Effect of Gravity Modulation on Solutal Convection During Directional Solidification Classic Reprint written by B. T. Murray and published by Forgotten Books. This book was released on 2017-10-29 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Effect of Gravity Modulation on Solutal Convection During Directional Solidification More recently, Wadih and Roux [13] have considered the effect of gravity modulation on an infinite vertical cylinder of fluid subject to a constant vertical temperature gradient. A three-dimensional simulation of rayleigh-benard convection with gravitational modulation has been performed by Biringen and Peltier Nonlinear convection was simulated te sulting from both sinusoidal and random modulation with and without a one-g background. They obtained synchronous and subhamionic response resulting from sinusoidal modulation in agreement with Gresho and Sani, and showed how the finite-amplitude solutions transport heat under various modulation conditions. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Download or read book Convection in Porous Media written by D.A. Nield and published by Springer Science & Business Media. This book was released on 2006-12-06 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes nearly 1000 new references.

Download or read book The Effect of Gravity Modulation on Solutal Convection During Directional Solidification written by B. T. Murray and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Convection in Porous Media written by Donald A. Nield and published by Springer. This book was released on 2017-03-15 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of a widely admired text provides a user-friendly introduction to the field that requires only routine mathematics. The book starts with the elements of fluid mechanics and heat transfer, and covers a wide range of applications from fibrous insulation and catalytic reactors to geological strata, nuclear waste disposal, geothermal reservoirs, and the storage of heat-generating materials. As the standard reference in the field, this book will be essential to researchers and practicing engineers, while remaining an accessible introduction for graduate students and others entering the field. The new edition features 2700 new references covering a number of rapidly expanding fields, including the heat transfer properties of nanofluids and applications involving local thermal non-equilibrium and microfluidic effects.

Download or read book Solidification and Gravity V written by A. Roósz and published by Trans Tech Publications Ltd. This book was released on 2010-05-04 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the FIFTH INTERNATIONAL CONFERENCE ON SOLIDIFICATION AND GRAVITY, University of Miskolc, Miskolc-Lillafüred, Hungary

Download or read book Studies of Convection in a Solidifying System with Surface Tension at Reduced Gravity written by B. N. Antar and published by . This book was released on 1978 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Studies of Convection in a Solidifying System with Surface Tension at Reduced Gravity written by Basil N. Antar and published by . This book was released on 1978 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interactive Dynamics of Convection and Solidification written by S.H. Davis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phase transformation from liquid to solid is a phenomenon central to a wide range of manufacturing and natural processes. The presence of phase transformation can drive convection in the melt through the liberation of latent heat, the rejection of solute, and the change of density upon freezing. The fluid mechanics itself can playa central role; the phase transformation can be strongly altered by convective transport in the liquid through the modification of the thermal and solutal environment of the solid-liquid interface; these local fields control the freezing characteristics at the interface. The convection can be generated naturally by buoyancy forces arising from gradients of temperature and concentration in the liquid, by density changes upon freezing, and by thermocapillary and solutocapillary forces on liquid-solid interfaces. The interactive coupling between solidification and convection forms the subject of this volume. Such coupled processes are significant on a large range of scales. Among the applications of interest are the manufacture of single crystals, the processing of surfaces using laser or molecular beams, and the processes of soldering and welding. One wants to understand and predict macrosegregation in castings, transport and fractionation in geological and geophysical systems, and heat accumulation in energy redistribution and storage systems. This volume contains papers presented at the NATO Advanced Research Workshop on "Interactive Dynamics of Convection and Solidification" held in Chamonix, France, March 8-13, 1992.

Download or read book Solidification and Gravity IV written by A. Roósz and published by Trans Tech Publications Ltd. This book was released on 2006-03-15 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection of papers provides the most up-to-date information available for researchers and engineers who are interested in any aspect of the field of solidification processes. Herein, theoretical analyses are presented, as well as studies of the technological problems which are associated with solidification in various gravitational environments. The topics covered range from fundamental aspects and modelling, to practical engineering applications.

Download or read book Processing by Centrifugation written by Liya L. Regel and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the Fourth International Workshop on Materials Processing at High Gravity, held at Clarkson University, May 29 to June 2, 2000. There were 73 attendees from 16 countries. Since the topics extended well beyond materials processing, it was felt appropriate to name this proceedings "Centrifugal Processing." Processing by Centrifugation includes the traditional bench-scale centrifuges, as well as all rotating systems utilizing the centrifugal and Coriolis forces to provide unique performance. Centrifugation led to the formation of sticky porous Teflon membranes, as well as improved polymeric solar cells. Centrifugation on large equipment improved the chemical vapor deposition of diamond films, influenced the growth and dissolution of semiconductor crystals, and elucidated the influence of gravity on coagulation of colloidal Teflon. A million g centrifuge was constructed and used to study sedimentation in solids and to prepare compositionally graded materials and new phases. Rotation of a pipe about its axis allowed the casting of large-diameter metal alloy pipes as well as coating the interior of pipes with a cermet utilizing self-propagating high-temperature synthesis. Such coatings are highly corrosion and erosion resistant. Flow on a rotating disk was shown to be useful for process intensification, such as large-scale manufacturing of nano-particles, polymerization reactions, and heat & mass transfer. Several theoretical studies dealt with the influence of rotation on fluid convection on surfaces and in pipes, tubes, and porous media. These have applications to integrated-circuit chip manufacturing, alloy casting, oil production, crystal growth, and the operation of rotating machinery.

Download or read book Science and Engineering of Casting Solidification written by Doru Michael Stefanescu and published by Springer. This book was released on 2015-08-27 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this popular textbook covers current topics in all areas of casting solidification. Partial differential equations and numerical analysis are used extensively throughout the text, with numerous calculation examples, to help the reader in achieving a working knowledge of computational solidification modeling. The features of this new edition include: • new chapters on semi-solid and metal matrix composites solidification • a significantly extended treatment of multiscale modeling of solidification and its applications to commercial alloys • a survey of new topics such as solidification of multicomponent alloys and molecular dynamic modeling • new theories, including a theory on oxide bi-films in the treatment of shrinkage problems • an in-depth treatment of the theoretical aspects of the solidification of the most important commercial alloys including steel, cast iron, aluminum-silicon eutectics, and superalloys • updated tables of material constants.

Download or read book Physics of Fluids in Microgravity written by Rodolfo Monti and published by CRC Press. This book was released on 2002-01-10 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a microgravity experiment, the conditions prevalent in fluid phases can be substantially different from those on the ground and can be exploited to improve different processes. Fluid physics research in microgravity is important for the advancement of all microgravity scients: life, material, and engineering. Space flight provides a unique laboratory that allows scientists to improve their understanding of the behaviour of fluids in low gravity, allowing the investigation of phenomena and processes normally masked by the effects of gravity and thus difficult to study on Earth. Physics of Fluids in Microgravity provides a clear view of recent research and progress in the different fields of fluid research in space. The topics presented include bubles and drops dynamics, Maragoni flows, diffustion and thermodiffusion, solidfication,a nd crystal growth. The results obtained so far are, in some cases, to be confirmed by extensive research activities on the International Space station, where basic and applied microgravity experimentation will take place in the years to come.

Download or read book Science and Engineering of Casting Solidification Second Edition written by Doru Michael Stefanescu and published by Springer Science & Business Media. This book was released on 2008-12-03 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stefanescu here attempts to describe solidification theory through the complex mathematical apparatus required for a fundamental treatment of the problem. The mathematics is however restricted to the elements essential to attain a working knowledge in the field. This is in line with the main goal of the book, which is to educate the reader in the fast moving area of computational modeling of solidification of castings. A special effort has been made to introduce the reader to the latest developments in solidification theory including, in this second edition, a new chapter on semi-solid casting.

Download or read book Solidification of Containerless Undercooled Melts written by Dieter M. Herlach and published by John Wiley & Sons. This book was released on 2012-05-21 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: All metallic materials are prepared from the liquid state as their parent phase. Solidification is therefore one of the most important phase transformation in daily human life. Solidification is the transition from liquid to solid state of matter. The conditions under which material is transformed determines the physical and chemical properties of the as-solidified body. The processes involved, like nucleation and crystal growth, are governed by heat and mass transport. Convection and undercooling provide additional processing parameters to tune the solidification process and to control solid material performance from the very beginning of the production chain. To develop a predictive capability for efficient materials production the processes involved in solidification have to be understood in detail. This book provides a comprehensive overview of the solidification of metallic melts processed and undercooled in a containerless manner by drop tube, electromagnetic and electrostatic levitation, and experiments in reduced gravity. The experiments are accompanied by model calculations on the influence of thermodynamic and hydrodynamic conditions that control selection of nucleation mechanisms and modify crystal growth development throughout the solidification process.

Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology