Download or read book Controlling Design Variants written by Anna Ericsson and published by Society of Manufacturing Engineers. This book was released on 1999 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Introduces the concept of modular design within the product platform approach, intended to increase company efficiency while reducing costs and time to market. Companies can achieve significant advantages by separating parts that should vary to satisfy customer needs from parts that should be kept as common units. The terminology and a five-step method for creating modular product platforms are developed."--Back cover.
Download or read book Modular System Design and Evaluation written by Mark Sh. Levin and published by Springer. This book was released on 2014-09-06 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines seven key combinatorial engineering frameworks (composite schemes consisting of algorithms and/or interactive procedures) for hierarchical modular (composite) systems. These frameworks are based on combinatorial optimization problems (e.g., knapsack problem, multiple choice problem, assignment problem, morphological clique problem), with the author’s version of morphological design approach – Hierarchical Morphological Multicritieria Design (HMMD) – providing a conceptual lens with which to elucidate the examples discussed. This approach is based on ordinal estimates of design alternatives for systems parts/components, however, the book also puts forward an original version of HMMD that is based on new interval multiset estimates for the design alternatives with special attention paid to the aggregation of modular solutions (system versions). The second part of ‘Modular System Design and Evaluation’ provides ten information technology case studies that enriches understanding of the design of system design, detection of system bottlenecks and system improvement, amongst others. The book is intended for researchers and scientists, students, and practitioners in many domains of information technology and engineering. The book is also designed to be used as a text for courses in system design, systems engineering and life cycle engineering at the level of undergraduate level, graduate/PhD levels, and for continuing education. The material and methods contained in this book were used over four years in Moscow Institute of Physics and Technology (State University) in the author’s faculty course “System Design”.
Download or read book Modern Epidemiology written by Kenneth J. Rothman and published by Lippincott Williams & Wilkins. This book was released on 2008 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thoroughly revised and updated Third Edition of the acclaimed Modern Epidemiology reflects both the conceptual development of this evolving science and the increasingly focal role that epidemiology plays in dealing with public health and medical problems. Coauthored by three leading epidemiologists, with sixteen additional contributors, this Third Edition is the most comprehensive and cohesive text on the principles and methods of epidemiologic research. The book covers a broad range of concepts and methods, such as basic measures of disease frequency and associations, study design, field methods, threats to validity, and assessing precision. It also covers advanced topics in data analysis such as Bayesian analysis, bias analysis, and hierarchical regression. Chapters examine specific areas of research such as disease surveillance, ecologic studies, social epidemiology, infectious disease epidemiology, genetic and molecular epidemiology, nutritional epidemiology, environmental epidemiology, reproductive epidemiology, and clinical epidemiology.
Download or read book Mechatronic Systems Design written by Klaus Janschek and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of the material.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XIII written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book An Architectural Approach to Instructional Design written by Andrew S. Gibbons and published by Routledge. This book was released on 2013-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2014 AECT Design & Development Outstanding Book Award An Architectural Approach to Instructional Design is organized around a groundbreaking new way of conceptualizing instructional design practice. Both practical and theoretically sound, this approach is drawn from current international trends in architectural, digital, and industrial design, and focuses on the structural and functional properties of the artifact being designed rather than the processes used to design it. Harmonious with existing systematic design models, the architectural approach expands the scope of design discourse by introducing new depth into the conversation and merging current knowledge with proven systematic techniques. An architectural approach is the natural result of increasing technological complexity and escalating user expectations. As the complexity of design problems increases, specialties evolve their own design languages, theories, processes, tools, literature, organizations, and standards. An Architectural Approach to Instructional Design describes the implications for theory and practice, providing a powerful and commercially relevant introduction for all students of instructional design.
Download or read book Research in Interactive Design Vol 4 written by Xavier Fischer and published by Springer. This book was released on 2016-03-02 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.
Download or read book Uniform Output Regulation of Nonlinear Systems written by Alexey Pavlov and published by Springer Science & Business Media. This book was released on 2006 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study of the nonlinear output regulation problem embraces local as well as global cases, covering such aspects as controller design and practical implementation issues. From the reviews: "The authors treat the problem of output regulation for a nonlinear control system...[they] develop a global approach to output regulation along familiar lines....I found the book to be ambitious and rigorous, tackling some hard conceptual issues." --IEEE TRANSACTIONS ON AUTOMATIC CONTROL
Download or read book Information and Management Systems for Product Customization written by Thorsten Blecker and published by Springer Science & Business Media. This book was released on 2005-12-28 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's competitive environment, manufacturing and service companies are intensifying their customization processes. Customization means companies must meet the challenge of providing individualized products and services, without introducing high costs. Therefore, companies must address both customization and cost factors to gain a competitive advantage. While product customization is the manufacturing of products according to individual customer needs, it does not involve any focus on the cost perspective. Information and Management Systems for Product Customization will concentrate on both product customization and costs' efficiency, which is termed as mass customization. Moreover, mass customization with its multi-dimensions is the new business paradigm challenging today's manufacturing companies.
Download or read book Co design Approaches to Dependable Networked Control Systems written by Daniel Simon and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems (NCS) is a growing field of application and calls for the development of integrated approaches requiring multidisciplinary skills in control, real-time computing and communication protocols. This book describes co-design approaches, and establishes the links between the QoC (Quality of Control) and QoS (Quality of Service) of the network and computing resources. The methods and tools described in this book take into account, at design level, various parameters and properties that must be satisfied by systems controlled through a network. Among the important network properties examined are the QoC, the dependability of the system, and the feasibility of the real-time scheduling of tasks and messages. Correct exploitation of these approaches allows for efficient design, diagnosis, and implementation of the NCS. This book will be of great interest to researchers and advanced students in automatic control, real-time computing, and networking domains, and to engineers tasked with development of NCS, as well as those working in related network design and engineering fields.
Download or read book Organic Computing A Paradigm Shift for Complex Systems written by Christian Müller-Schloer and published by Springer Science & Business Media. This book was released on 2011-04-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Computing has emerged as a challenging vision for future information processing systems. Its basis is the insight that we will increasingly be surrounded by and depend on large collections of autonomous systems, which are equipped with sensors and actuators, aware of their environment, communicating freely, and organising themselves in order to perform actions and services required by the users. These networks of intelligent systems surrounding us open fascinating ap-plication areas and at the same time bear the problem of their controllability. Hence, we have to construct such systems as robust, safe, flexible, and trustworthy as possible. In particular, a strong orientation towards human needs as opposed to a pure implementation of the tech-nologically possible seems absolutely central. The technical systems, which can achieve these goals will have to exhibit life-like or "organic" properties. "Organic Computing Systems" adapt dynamically to their current environmental conditions. In order to cope with unexpected or undesired events they are self-organising, self-configuring, self-optimising, self-healing, self-protecting, self-explaining, and context-aware, while offering complementary interfaces for higher-level directives with respect to the desired behaviour. First steps towards adaptive and self-organising computer systems are being undertaken. Adaptivity, reconfigurability, emergence of new properties, and self-organisation are hot top-ics in a variety of research groups worldwide. This book summarises the results of a 6-year priority research program (SPP) of the German Research Foundation (DFG) addressing these fundamental challenges in the design of Organic Computing systems. It presents and discusses the theoretical foundations of Organic Computing, basic methods and tools, learning techniques used in this context, architectural patterns and many applications. The final outlook shows that in the mean-time Organic Computing ideas have spawned a variety of promising new projects.
Download or read book Adaptive Control of Chemical Processes 1985 written by H. Unbehauen and published by Elsevier. This book was released on 2014-05-23 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents reports on recent industrial applications, experiences and advances in the use of adaptive and self-tuning control in chemical and related processes. Material covered includes new, practically orientated adaptive control algorithms as well as the control of various chemical plants such as distillation columns, chemical reactors, drying and bleaching plants, plastic extruders and wastewater neutralization plants. Contains 34 papers.
Download or read book Critical Systems Formal Methods and Automated Verification written by Maurice H. ter Beek and published by Springer. This book was released on 2016-09-12 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Joint 21st International Workshop on Formal Methods for Industrial Critical Systems and the 16th International Workshop on Automated Verification of Critical Systems, FMICS-AVoCS 2016, held in Pisa, Italy, in September 2016.The 11 full papers and 4 short papers presented together with one invited talk were carefully reviewed and selected from 24 submissions. They are organized in the following sections: automated verification techniques; model-based system analysis; and applications and case studies.
Download or read book New Production Technologies in Aerospace Industry written by Berend Denkena and published by Springer Science & Business Media. This book was released on 2013-09-18 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning. The target audience primarily comprises researchers and experts in the field but the book may also be beneficial for graduate students.
Download or read book Software Product Line Engineering written by Klaus Pohl and published by Springer Science & Business Media. This book was released on 2005-08-03 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software product line engineering has proven to be the methodology for developing a diversity of software products and software intensive systems at lower costs, in shorter time, and with higher quality. In this book, Pohl and his co-authors present a framework for software product line engineering which they have developed based on their academic as well as industrial experience gained in projects over the last eight years. They do not only detail the technical aspect of the development, but also an integrated view of the business, organisation and process aspects are given. In addition, they explicitly point out the key differences of software product line engineering compared to traditional single software system development, as the need for two distinct development processes for domain and application engineering respectively, or the need to define and manage variability.
Download or read book Statistics for Epidemiology written by Nicholas P. Jewell and published by CRC Press. This book was released on 2003-08-26 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical ideas have been integral to the development of epidemiology and continue to provide the tools needed to interpret epidemiological studies. Although epidemiologists do not need a highly mathematical background in statistical theory to conduct and interpret such studies, they do need more than an encyclopedia of "recipes."Statistics for E
Download or read book Multidisciplinary Research in Control written by Laura Giarré and published by Springer Science & Business Media. This book was released on 2003-05-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mohammed Dahleh symposium brought together leading researchers in several areas of engineering and science. Many of the presentations focused on new emerging research areas of key significance. These new areas have in common that the dynamics and control theory and methods provide the appropriate framework for the understanding of the corresponding phenomena, while at the same time providing many of the tools necessary for their application to relevant technologies. Examples of these opportunities include the areas of systems biology, quantum feedback and control, fluid dynamics, and control applications in nanotechnology. This collected volume demonstrates the importance of these emerging areas in the current research agenda in science and technology and shows that a unique opportunity exists to drastically extend the scope and impact of dynamics and control methods far beyond their traditional areas of application in engineering.
