Download or read book Understanding and Using the Controller Area Network Communication Protocol written by Marco Di Natale and published by Springer Science & Business Media. This book was released on 2012-01-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book to offers a hands-on guide to designing, analyzing and debugging a communication infrastructure based on the Controller Area Network (CAN) bus. Although the CAN bus standard is well established and currently used in most automotive systems, as well as avionics, medical systems and other devices, its features are not fully understood by most developers, who tend to misuse the network. This results in lost opportunities for better efficiency and performance. These authors offer a comprehensive range of architectural solutions and domains of analysis. It also provides formal models and analytical results, with thorough discussion of their applicability, so that it serves as an invaluable reference for researchers and students, as well as practicing engineers.

Download or read book Controller Area Network written by Konrad Etschberger and published by . This book was released on 2001 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.

Download or read book A Comprehensible Guide to Controller Area Network written by Wilfried Voss and published by Copperhill Media. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controller Area Network (CAN) is a serial network technology that was originally designed for the automotive industry, but has also become a popular bus in industrial automation. The CAN bus is primarily used in embedded solutions and provides communication among microprocessors up to real-time requirements. A Comprehensible Guide To Controller Area Network represents a very thoroughly researched and complete work on CAN. It provides information on all CAN features and aspects combined with high level of readability. Book jacket.

Download or read book Embedded Networking with CAN and CANopen written by Olaf Pfeiffer and published by Copperhill Media. This book was released on 2008 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAN (Controller Area Network) is a serial communication protocol that was originally developed for the automobile industry. CAN is far superior to conventional serial technologies such as RS232 in regards to functionality and reliability and yet CAN implementations are more cost effective. CANopen, a higher layer protocol based on CAN, provides the means to apply the ingenious CAN features to a variety of industrial-strength applications. Many users, for example in the field of medical engineering, opted for CANopen because they have to meet particularly stringent safety requirements. Similar requirements had to be considered by manufacturers of other equipment with very high safety or reliability requirements (e.g. robots, lifts and transportation systems). Providing a detailed look at both CAN and CANopen, this book examines those technologies in the context of embedded networks. There is an overview of general embedded networking and an introduction to the primary functionality provided by CANopen. Everything one needs to know to configure and operate a CANopen network using off-the-shelf components is described, along with details for those designers who want to build their own CANopen nodes. The wide variety of applications for CAN and CANopen is discussed, and instructions in developing embedded networks based on the protocol are included. In addition, references and examples using MicroCANopen, PCANopen Magic, and Vector's high-end development tools are provided.

Download or read book Understanding and Using the Controller Area Network Communication Protocol written by Marco Di Natale and published by Springer Science & Business Media. This book was released on 2012-01-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book to offers a hands-on guide to designing, analyzing and debugging a communication infrastructure based on the Controller Area Network (CAN) bus. Although the CAN bus standard is well established and currently used in most automotive systems, as well as avionics, medical systems and other devices, its features are not fully understood by most developers, who tend to misuse the network. This results in lost opportunities for better efficiency and performance. These authors offer a comprehensive range of architectural solutions and domains of analysis. It also provides formal models and analytical results, with thorough discussion of their applicability, so that it serves as an invaluable reference for researchers and students, as well as practicing engineers.

Download or read book Industrial Sensors and Controls in Communication Networks written by Dong-Seong Kim and published by Springer. This book was released on 2018-12-11 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative text/reference presents a detailed review of the state of the art in industrial sensor and control networks. The book examines a broad range of applications, along with their design objectives and technical challenges. The coverage includes fieldbus technologies, wireless communication technologies, network architectures, and resource management and optimization for industrial networks. Discussions are also provided on industrial communication standards for both wired and wireless technologies, as well as for the Industrial Internet of Things (IIoT). Topics and features: describes the FlexRay, CAN, and Modbus fieldbus protocols for industrial control networks, as well as the MIL-STD-1553 standard; proposes a dual fieldbus approach, incorporating both CAN and ModBus fieldbus technologies, for a ship engine distributed control system; reviews a range of industrial wireless sensor network (IWSN) applications, from environmental sensing and condition monitoring, to process automation; examines the wireless networking performance, design requirements, and technical limitations of IWSN applications; presents a survey of IWSN commercial solutions and service providers, and summarizes the emerging trends in this area; discusses the latest technologies and open challenges in realizing the vision of the IIoT, highlighting various applications of the IIoT in industrial domains; introduces a logistics paradigm for adopting IIoT technology on the Physical Internet. This unique work will be of great value to all researchers involved in industrial sensor and control networks, wireless networking, and the Internet of Things.

Download or read book High Performance Embedded Computing written by Wayne Wolf and published by Elsevier. This book was released on 2010-07-26 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, embedded systems have emerged as an integral though unseen part of many consumer, industrial, and military devices. The explosive growth of these systems has resulted in embedded computing becoming an increasingly important discipline. The need for designers of high-performance, application-specific computing systems has never been greater, and many universities and colleges in the US and worldwide are now developing advanced courses to help prepare their students for careers in embedded computing.High-Performance Embedded Computing: Architectures, Applications, and Methodologies is the first book designed to address the needs of advanced students and industry professionals. Focusing on the unique complexities of embedded system design, the book provides a detailed look at advanced topics in the field, including multiprocessors, VLIW and superscalar architectures, and power consumption. Fundamental challenges in embedded computing are described, together with design methodologies and models of computation. HPEC provides an in-depth and advanced treatment of all the components of embedded systems, with discussions of the current developments in the field and numerous examples of real-world applications. - Covers advanced topics in embedded computing, including multiprocessors, VLIW and superscalar architectures, and power consumption - Provides in-depth coverage of networks, reconfigurable systems, hardware-software co-design, security, and program analysis - Includes examples of many real-world embedded computing applications (cell phones, printers, digital video) and architectures (the Freescale Starcore, TI OMAP multiprocessor, the TI C5000 and C6000 series, and others)

Download or read book Designing Embedded Systems with PIC Microcontrollers written by Tim Wilmshurst and published by Elsevier. This book was released on 2006-10-24 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems with PIC Microcontrollers: Principles and Applications is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, the book provides an in-depth treatment of microcontroller design as well as programming in both assembly language and C, along with advanced topics such as techniques of connectivity and networking and real-time operating systems. In this one book students get all they need to know to be highly proficient at embedded systems design. This text combines embedded systems principles with applications, using the16F84A, 16F873A and the 18F242 PIC microcontrollers. Students learn how to apply the principles using a multitude of sample designs and design ideas, including a robot in the form of an autonomous guide vehicle. Coverage between software and hardware is fully balanced, with full presentation given to microcontroller design and software programming, using both assembler and C. The book is accompanied by a companion website containing copies of all programs and software tools used in the text and a 'student' version of the C compiler. This textbook will be ideal for introductory courses and lab-based courses on embedded systems, microprocessors using the PIC microcontroller, as well as more advanced courses which use the 18F series and teach C programming in an embedded environment. Engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC microcontroller. *Gain the knowledge and skills required for developing today's embedded systems, through use of the PIC microcontroller.*Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family.*Learn how to program in Assembler and C.*Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle.*Accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a 'student' version of the C complier.

Download or read book Fieldbus Systems and Their Applications 2005 written by Miguel Leon Chavez and published by Elsevier. This book was released on 2006-11-23 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FeT series – Fieldbus Systems and their Applications Conferences started in 1995 in Vienna, Austria. Since FeT'2001 in Nancy, France, the conference became an IFAC – International Federation of Automatic Control sponsored event. These proceedings focus on 13 sessions, covering, fieldbus based systems, services, protocols and profiles, system integration with heterogeneous networks, management, real-time, safety, dependability and security, distributed embedded systems, wireless networking for field applications, education and emerging trends. Two keynote speeches from experts outside Europe are featured. The first one entitled "Bandwidth Allocation Scheme in Fieldbuses" by Prof. Seung Ho, Hanyang University, Korea. The second by, Prof. I.F. Akyildiz, Georgia Institute of Technology, USA, "Key Technologies for Wireless Networking in the Next Decade". - Featuring 36 high quality papers from 13 countries - Keynote speech reflecting the current interest of wireless communications for industrial applications - FeT'2005 was supported by a International Program Committee of around 40 members from 15 countries, 6 from Europe

Download or read book Multiplexed Networks for Embedded Systems written by Dominique Paret and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiplexed networks are essential for the unified, efficient and cost-effective exchange of electronic information within embedded component systems. This is especially important in automotive manufacturing as vehicles become increasingly reliant on robust electronic networks and systems for improved reliability, anti-lock brake systems (ABS), steering, on-board navigation systems, and much more. The latest systems such as X-by-Wire and FlexRay aim to produce faster, fault-tolerant network component interconnects, for state-of-the-art network implementation and safer, more reliable engineering of vehicular systems. This book provides a thorough and comprehensive introduction to automotive multiplexed network buses, covering the technical principles, components, implementation issues and applications. Key features: Presents a thorough coverage of the controller area network (CAN) protocol, including information on physical layers, conformity problems, hardware and software tools, and application layers. Gives a detailed description of the new local interconnect network (LIN) bus, setting out its developments, properties, problems and ways to overcome these. Examines the existing and emerging network buses such as time-triggered CAN (TTCAN), FlexRay and X-by-Wire. Explores the possibilities for linking the various buses that are discussed, explaining how the Fail-Safe-System basis chip (SBC) and other gateways are designed and constructed. Analyses wired and wireless internal and external serial links, including Safe-by-Wire plus, I2C, Media Oriented Systems Transport (MOST), remote keyless entry, tyre pressure monitoring systems (TPMS) and Bluetooth. A valuable guide to embedded systems for a range of applications, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe-by-Wire...is essential reading for electronics engineers and researchers developing electronics for the automotive industry. It is also useful for practising aerospace engineers and other practitioners interested in the application of network technologies, and advanced students taking courses on automotive and embedded system design.

Download or read book Smart Cities Cybersecurity and Privacy written by Danda B. Rawat and published by Elsevier. This book was released on 2018-12-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Cities Cybersecurity and Privacy examines the latest research developments and their outcomes for safe, secure, and trusting smart cities residents. Smart cities improve the quality of life of citizens in their energy and water usage, healthcare, environmental impact, transportation needs, and many other critical city services. Recent advances in hardware and software, have fueled the rapid growth and deployment of ubiquitous connectivity between a city's physical and cyber components. This connectivity however also opens up many security vulnerabilities that must be mitigated. Smart Cities Cybersecurity and Privacy helps researchers, engineers, and city planners develop adaptive, robust, scalable, and reliable security and privacy smart city applications that can mitigate the negative implications associated with cyber-attacks and potential privacy invasion. It provides insights into networking and security architectures, designs, and models for the secure operation of smart city applications. - Consolidates in one place state-of-the-art academic and industry research - Provides a holistic and systematic framework for design, evaluating, and deploying the latest security solutions for smart cities - Improves understanding and collaboration among all smart city stakeholders to develop more secure smart city architectures

Download or read book MSP430 Microcontroller Basics written by John H. Davies and published by Elsevier. This book was released on 2008-08-21 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MSP430 microcontroller family offers ultra-low power mixed signal, 16-bit architecture that is perfect for wireless low-power industrial and portable medical applications. This book begins with an overview of embedded systems and microcontrollers followed by a comprehensive in-depth look at the MSP430. The coverage included a tour of the microcontroller's architecture and functionality along with a review of the development environment. Start using the MSP430 armed with a complete understanding of the microcontroller and what you need to get the microcontroller up and running! - Details C and assembly language for the MSP430 - Companion Web site contains a development kit - Full coverage is given to the MSP430 instruction set, and sigma-delta analog-digital converters and timers

Download or read book Microcontroller Projects in C for the 8051 written by Dogan Ibrahim and published by Newnes. This book was released on 2000-06-05 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a thoroughly practical way to explore the 8051 and discover C programming through project work. Through graded projects, Dogan Ibrahim introduces the reader to the fundamentals of microelectronics, the 8051 family, programming in C, and the use of a C compiler. The specific device used for examples is the AT89C2051 - a small, economical chip with re-writable memory, readily available from the major component suppliers. A working knowledge of microcontrollers, and how to program them, is essential for all students of electronics. In this rapidly expanding field many students and professionals at all levels need to get up to speed with practical microcontroller applications. Their rapid fall in price has made microcontrollers the most exciting and accessible new development in electronics for years - rendering them equally popular with engineers, electronics hobbyists and teachers looking for a fresh range of projects. Microcontroller Projects in C for the 8051 is an ideal resource for self-study as well as providing an interesting, enjoyable and easily mastered alternative to more theoretical textbooks. Practical projects that enable students and practitioners to get up and running straight away with 8051 microcontrollers A hands-on introduction to practical C programming A wealth of project ideas for students and enthusiasts

Download or read book Introduction to Storage Area Networks written by Jon Tate and published by IBM Redbooks. This book was released on 2018-10-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superabundance of data that is created by today's businesses is making storage a strategic investment priority for companies of all sizes. As storage takes precedence, the following major initiatives emerge: Flatten and converge your network: IBM® takes an open, standards-based approach to implement the latest advances in the flat, converged data center network designs of today. IBM Storage solutions enable clients to deploy a high-speed, low-latency Unified Fabric Architecture. Optimize and automate virtualization: Advanced virtualization awareness reduces the cost and complexity of deploying physical and virtual data center infrastructure. Simplify management: IBM data center networks are easy to deploy, maintain, scale, and virtualize, delivering the foundation of consolidated operations for dynamic infrastructure management. Storage is no longer an afterthought. Too much is at stake. Companies are searching for more ways to efficiently manage expanding volumes of data, and to make that data accessible throughout the enterprise. This demand is propelling the move of storage into the network. Also, the increasing complexity of managing large numbers of storage devices and vast amounts of data is driving greater business value into software and services. With current estimates of the amount of data to be managed and made available increasing at 60% each year, this outlook is where a storage area network (SAN) enters the arena. SANs are the leading storage infrastructure for the global economy of today. SANs offer simplified storage management, scalability, flexibility, and availability; and improved data access, movement, and backup. Welcome to the cognitive era. The smarter data center with the improved economics of IT can be achieved by connecting servers and storage with a high-speed and intelligent network fabric. A smarter data center that hosts IBM Storage solutions can provide an environment that is smarter, faster, greener, open, and easy to manage. This IBM® Redbooks® publication provides an introduction to SAN and Ethernet networking, and how these networks help to achieve a smarter data center. This book is intended for people who are not very familiar with IT, or who are just starting out in the IT world.

Download or read book CAN System Engineering written by Wolfhard Lawrenz and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the various challenges and open questions relating to CAN communication networks. Opening with a short introduction into the fundamentals of CAN, the book then examines the problems and solutions for the physical layout of networks, including EMC issues and topology layout. Additionally, a discussion of quality issues with a particular focus on test techniques is presented. Each chapter features a collection of illuminating insights and detailed technical information supplied by a selection of internationally-regarded experts from industry and academia. Features: presents thorough coverage of architectures, implementations and application of CAN transceiver, data link layer and so-called higher layer software; explains CAN EMC characteristics and countermeasures, as well as how to design CAN networks; demonstrates how to practically apply and test CAN systems; includes examples of real networks from diverse applications in automotive engineering, avionics, and home heating technology.

Download or read book Networking For Dummies written by Doug Lowe and published by John Wiley & Sons. This book was released on 2020-07-14 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set up a secure network at home or the office Fully revised to cover Windows 10 and Windows Server 2019, this new edition of the trusted Networking For Dummies helps both beginning network administrators and home users to set up and maintain a network. Updated coverage of broadband and wireless technologies, as well as storage and back-up procedures, ensures that you’ll learn how to build a wired or wireless network, secure and optimize it, troubleshoot problems, and much more. From connecting to the Internet and setting up a wireless network to solving networking problems and backing up your data—this #1 bestselling guide covers it all. Build a wired or wireless network Secure and optimize your network Set up a server and manage Windows user accounts Use the cloud—safely Written by a seasoned technology author—and jam-packed with tons of helpful step-by-step instructions—this is the book network administrators and everyday computer users will turn to again and again.