Download or read book Controlled Growth Of Nanomaterials written by Lide Zhang and published by World Scientific. This book was released on 2007-11-12 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest methods for the controlled growth of nanomaterial systems. The coverage includes simple and complex nanomaterial systems, ordered nanostructures and complex nanostructure arrays, and the essential conditions for the controlled growth of nanostructures with different morphologies, sizes, compositions, and microstructures. The book also discusses the dynamics of controlled growth and thermodynamic characteristics of two-dimensional nanorestricted systems. The authors introduce various novel synthesis methods for nanomaterials and nanostructures, such as hierarchical growth, heterostructures growth, doping growth and some developing template synthesis methods. In addition to discussing applications, the book reviews developing trends in nanomaterials and nanostructures.
Download or read book Controlled Synthesis of Nanoparticles in Microheterogeneous Systems written by Vincenzo Turco Liveri and published by Springer Science & Business Media. This book was released on 2006-01-04 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first step in developing nanoscience and nanotechnology is the production of nanoparticles. Controlled Synthesis of Nanoparticles in Microheterogeneous Systems contains descriptions of one of the most powerful bottom-up methods of synthesizing size controlled and stable nanoparticles. This method is based on the use of surfactant-containing microheterogeneous systems: liquid crystals, monolayers and multilayers, solutions of direct and reversed micelles, direct and reversed vesicles, and water-in-oil and oil-in-water microemulsions. The author is prominent in the field of physico-chemical characterization of microheterogeneous systems and their use as ideal solvent and reaction media for the production and long-term storage of nanomaterials. This is the first book that attempts to unify the knowledge necessary for judicious manipulation of surfactant-based systems and a fine tuning of geometric and physico-chemical properties of nanoparticles of a wide variety of substances. Prof. Turco Liveri has chosen to write an easy-to-read book aiming to be evocative rather than exhaustive. Because of the intense interest in nanoscience and nanomaterials, this book is an important fundamental work that fits ideally into the series Nanostructure Science and Technology and will be useful for a wide range of students and young researchers involved in the study and manipulation of matter at the atomic level.
Download or read book Crystallization and Growth of Colloidal Nanocrystals written by Edson Roberto Leite and published by Springer Science & Business Media. This book was released on 2011-11-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the size, shape, and microstructure of nanocrystalline materials strongly impact physical and chemical properties, the development of new synthetic routes to nanocrystals with controlled composition and morphology is a key objective of the nanomaterials community. This objective is dependent on control of the nucleation and growth mechanisms that occur during the synthetic process, which in turn requires a fundamental understanding of both classical nucleation and growth and non-classical growth processes in nanostructured materials. Recently, a novel growth process called Oriented Attachment (OA) was identified which appears to be a fundamental mechanism during the development of nanoscale materials. OA is a special case of aggregation that provides an important route by which nanocrystals grow, defects are formed, and unique—often symmetry-defying—crystal morphologies can be produced. This growth mechanism involves reversible self-assembly of primary nanocrystals followed by reorientation of the assembled nanoparticles to achieve structural accord at the particle-particle interface, the removal of adsorbates and solvent molecules, and, finally, the irreversible formation of chemical bonds to produce new single crystals, twins, and intergrowths. Crystallization and Growth of Colloidal Nanocrystals provides a current understanding of the mechanisms related to nucleation and growth for use in controlling nanocrystal morphology and physical-chemical properties, and is essential reading for any chemist or materials scientist with an interest in using nanocrystals as building blocks for larger structures. This book provides a compendium for the expert reader as well as an excellent introduction for advanced undergraduate and graduate students seeking a gateway into this dynamic area of research.
Download or read book Controlling the growth of nanoparticles produced in a high power pulsed plasma written by Rickard Gunnarsson and published by Linköping University Electronic Press. This book was released on 2017-12-21 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology can profoundly benefit our health, environment and everyday life. In order to make this a reality, both technological and theoretical advancements of the nanomaterial synthesis methods are needed. A nanoparticle is one of the fundamental building blocks in nanotechnology and this thesis describes the control of the nucleation, growth and oxidation of titanium particles produced in a pulsed plasma. It will be shown that by controlling the process conditions both the composition (oxidationstate) and size of the particles can be varied. The experimental results are supported by theoretical modeling. If processing conditions are chosen which give a high temperature in the nanoparticle growth environment, oxygen was found to be necessary in order to nucleate the nanoparticles. The two reasons for this are 1: the lower vapor pressure of a titanium oxide cluster compared to a titanium cluster, meaning a lower probability of evaporation, and 2: the ability of a cluster to cool down by ejecting an oxygen atom when an oxygen molecule condenses on its surface. When the oxygen gas flow was slightly increased, the nanoparticle yield and oxidation state increased. A further increase caused a decrease in particle yield which is attributed to a slight oxidation ofthe cathode. By varying the oxygen flow, it was possible to control the oxidation state of the nanoparticles without fully oxidizing the cathode. Pure titanium nanoparticles could not be produced in a high vacuum system because oxygen containing gases such as residual water vapour have a profound influence on nanoparticle yield and composition. In an ultrahigh vacuum system titanium nanoparticles without significantoxygen contamination were produced by reducing the temperature of the growth environment and increasing the pressure of an argon-helium gas mixture within whichthe nanoparticles grew. The dimer formation rate necessary for this is only achievable at higher pressures. After a dimer has formed, it needs to grow by colliding with a titanium atom followed by cooling by collisions with multiple buffer gas atoms. The condensation event heats up the cluster to a temperature much higher than the gas temperature, where it is during a short time susceptible to evaporation. When the clusters’ internal energy has decreased by collisions with the gas to less than the energy required to evaporate a titanium atom, it is temporarily stable until the next condensation event occurs. The temperature difference by which the cluster has to cool down before it is temporarily stable is exactly as many kelvins as the gas temperature.The addition of helium was found to decrease the temperature of the gas, making it possible for nanoparticles of pure titanium to grow. The process window where this is possible was determined and the results presented opens up new possibilities to synthesize particles with a controlled contamination level and deposition rate.The size of the nanoparticles has been controlled by three means. The first is to change the electrical potential around the growth zone, which allows for size (diameter) control in the order of 25 to 75 nm without influencing the oxygen content of the particles. The second means is by increasing the pressure which decreases the ambipolar diffusion rate of the ions resulting in a higher growth material density. By doing this, the particle size can be increased from 50 to 250 nm, however the oxygen content also increases with increasing pressure when this is done in a high vacuum system. The last means of size control was by adding a helium flow to the process where higher flows resulted in smaller nanoparticle sizes. When changing the pressure in high vacuum, the morphology of the nanoparticles could be controlled. At low pressures, highly faceted near spherical particles were produced. Increasing the pressure caused the formation of cubic particles which appear to ‘fracture’ at higher pressures. At the highest pressure investigated, the particles became poly-crystalline with a cauliflower shape and this morphology was attributed to a lowad atom mobility. The ability to control the size, morphology and composition of the nanoparticles determines the success of applying the process to manufacture devices. In related work presented in this thesis it is shown that 150-200 nm molybdenum particles with cauliflower morphology were found to scatter light in which made them useful in photovoltaic applications, and the size of titanium dioxide nanoparticles were found to influence the selectivity of graphene based gas sensors.
Download or read book Green Nanomaterials written by Siddharth V. Patwardhan and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers emerging bioinspired green methods for preparing inorganic nanomaterials. The book starts with an introduction to the principles of green chemistry and engineering, and highlights the special properties that nanomaterials possess, their applications and ways to characterise them. It describes conventional methods of synthesising and manufacturing inorganic nanomaterials, and introduces biological and biomimetic/bioinspired synthetic methods as a solution to precisely control nanomaterials and design sustainable manufacturing routes. The book elaborates on various mechanisms and examples of green nanomaterials, including the role of organic matrix and natural self-assembly, and advantages and opportunities with green nanomaterials. Two case studies of magnetic and silica materials are provided for advanced readers. The book is an insightful reference text for researchers focusing on synthetic biology and nanomaterials. It is an essential title for postgraduates and final-year undergraduates studying advanced materials, sustainable engineering or environmental chemistry.
Download or read book Nanomaterials Chemistry written by C. N. R. Rao and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this handbook, the distinguished team of editors has combined the expertise of leading nanomaterials scientists to provide the latest overview of this field. They cover the whole spectrum of nanomaterials, ranging from theory, synthesis, properties, characterization to application, including such new developments as quantum dots, nanoparticles, nanoporous materials, nanowires, nanotubes, and nanostructured polymers. The result is recommended reading for everybody working in nanoscience: Newcomers to the field can acquaint themselves with this exciting subject, while specialists will find answers to all their questions as well as helpful suggestions for further research.
Download or read book Modern Aspects of Emulsion Science written by Bernard P Binks and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsions occur either as end products or during the processing of products in a huge range of areas including the food, agrochemical, pharmaceutical, paint and oil industries. Despite over one hundred years of research in the subject, however, a quantitative understanding of emulsions has been lacking. Modern Aspects of Emulsion Science presents a comprehensive description of both the scientific principles in the field and the very latest advances in research in this important area of surface and colloid science. Topics covered include emulsion formation, type, stability (creaming, flocculation, ripening, coalescence), monodisperse and gel emulsions, and applications. Emphasis has been placed on relating the chemistry of the surfactant or protein adsorbed at the oil-water interface to the principles of the physics involved in the bulk emulsion property. The book has been written by a collection of the world's leading experts in the field, and covers both experimental and theoretical approaches. Modern Aspects of Emulsion Science fills a real gap in the market, being the only book of its kind in print. As such it will prove essential reading for graduates and researchers in this subject, in both academia and industry.
Download or read book Controlling the Growth of Nanoparticles Produced in a Highpower Pulsed Plasma written by Rickard Gunnarsson and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology can profoundly benefit our health, environment and everyday life. In order to make this a reality, both technological and theoretical advancements of the nanomaterial synthesis methods are needed. A nanoparticle is one of the fundamental building blocks in nanotechnology and this thesis describes the control of the nucleation, growth and oxidation of titanium particles produced in a pulsed plasma. It will be shown that by controlling the process conditions both the composition (oxidationstate) and size of the particles can be varied. The experimental results are supported by theoretical modeling. If processing conditions are chosen which give a high temperature in the nanoparticle growth environment, oxygen was found to be necessary in order to nucleate the nanoparticles. The two reasons for this are 1: the lower vapor pressure of a titanium oxide cluster compared to a titanium cluster, meaning a lower probability of evaporation, and 2: the ability of a cluster to cool down by ejecting an oxygen atom when an oxygen molecule condenses on its surface. When the oxygen gas flow was slightly increased, the nanoparticle yield and oxidation state increased. A further increase caused a decrease in particle yield which is attributed to a slight oxidation ofthe cathode. By varying the oxygen flow, it was possible to control the oxidation state of the nanoparticles without fully oxidizing the cathode. Pure titanium nanoparticles could not be produced in a high vacuum system because oxygen containing gases such as residual water vapour have a profound influence on nanoparticle yield and composition. In an ultrahigh vacuum system titanium nanoparticles without significantoxygen contamination were produced by reducing the temperature of the growth environment and increasing the pressure of an argon-helium gas mixture within whichthe nanoparticles grew. The dimer formation rate necessary for this is only achievable at higher pressures. After a dimer has formed, it needs to grow by colliding with a titanium atom followed by cooling by collisions with multiple buffer gas atoms. The condensation event heats up the cluster to a temperature much higher than the gas temperature, where it is during a short time susceptible to evaporation. When the clusters’ internal energy has decreased by collisions with the gas to less than the energy required to evaporate a titanium atom, it is temporarily stable until the next condensation event occurs. The temperature difference by which the cluster has to cool down before it is temporarily stable is exactly as many kelvins as the gas temperature.The addition of helium was found to decrease the temperature of the gas, making it possible for nanoparticles of pure titanium to grow. The process window where this is possible was determined and the results presented opens up new possibilities to synthesize particles with a controlled contamination level and deposition rate.The size of the nanoparticles has been controlled by three means. The first is to change the electrical potential around the growth zone, which allows for size (diameter) control in the order of 25 to 75 nm without influencing the oxygen content of the particles. The second means is by increasing the pressure which decreases the ambipolar diffusion rate of the ions resulting in a higher growth material density. By doing this, the particle size can be increased from 50 to 250 nm, however the oxygen content also increases with increasing pressure when this is done in a high vacuum system. The last means of size control was by adding a helium flow to the process where higher flows resulted in smaller nanoparticle sizes. When changing the pressure in high vacuum, the morphology of the nanoparticles could be controlled. At low pressures, highly faceted near spherical particles were produced. Increasing the pressure caused the formation of cubic particles which appear to ‘fracture’ at higher pressures. At the highest pressure investigated, the particles became poly-crystalline with a cauliflower shape and this morphology was attributed to a lowad atom mobility. The ability to control the size, morphology and composition of the nanoparticles determines the success of applying the process to manufacture devices. In related work presented in this thesis it is shown that 150-200 nm molybdenum particles with cauliflower morphology were found to scatter light in which made them useful in photovoltaic applications, and the size of titanium dioxide nanoparticles were found to influence the selectivity of graphene based gas sensors.
Download or read book Nanotechnology Challenges written by Joachim Schummer and published by World Scientific. This book was released on 2006 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest methods for the controlled growth of nanomaterial systems. The coverage includes simple and complex nanomaterial systems, ordered nanostructures and complex nanostructure arrays, and the essential conditions for the controlled growth of nanostructures with different morphologies, sizes, compositions, and microstructures. The book also discusses the dynamics of controlled growth and thermodynamic characteristics of two-dimensional nanorestricted systems. The authors introduce various novel synthesis methods for nanomaterials and nanostructures, such as hierarchical growth, heterostructures growth, doping growth and some developing template synthesis methods. In addition to discussing applications, the book reviews developing trends in nanomaterials and nanostructures.
Download or read book Nanostructures Nanomaterials written by Guozhong Cao and published by Imperial College Press. This book was released on 2004 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.
Download or read book Metallic Nanostructures written by Yujie Xiong and published by Springer. This book was released on 2014-10-31 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the design for creation of metal nanomaterials with optimal functionality for specific applications. The authors describe how to make desired metal nanomaterials in a wet lab. They include an overview of applications metal nanomaterials can be implemented in and address the fundamentals in the controlled synthesis of metal nanostructures.
Download or read book Nanomaterials and Plant Potential written by Azamal Husen and published by Springer. This book was released on 2019-03-01 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developments in plant-mediated fabrication of metal and metal-oxide nanoparticles, and their characterization by using a variety of modern techniques. It explores in detail the application of nanoparticles in drug delivery, cancer treatment, catalysis, and as antimicrobial agent, antioxidant and the promoter of plant production and protection. Application of these nanoparticles in plant systems has started only recently and information is still scanty about their possible effects on plant growth and development. Accumulation and translocation of nanoparticles in plants, and the consequent growth response and stress modulation are not well understood. Plants exposed to these particles exhibit both positive and negative effects, depending on the concentration, size, and shape of the nanoparticles. The impact on plant growth and yield is often positive at lower concentrations and negative at higher ones. Exposure to some nanoparticles may improve the free-radical scavenging potential and antioxidant enzymatic activities in plants and alter the micro-RNAs expression that regulate the different morphological, physiological and metabolic processes in plant system, leading to improved plant growth and yields. The nanoparticles also carry out genetic reforms by efficient transfer of DNA or complete plastid genome into the respective plant genome due to their miniscule size and improved site-specific penetration. Moreover, controlled application of nanomaterials in the form of nanofertilizer offers a more synchronized nutrient fluidity with the uptake by the plant exposed, ensuring an increased nutrient availability. This book addresses these issues and many more. It covers fabrication of different/specific nanomaterials and their wide-range application in agriculture sector, encompassing the controlled release of nutrients, nutrient-use efficiency, genetic exchange, production of secondary metabolites, defense mechanisms, and the growth and productivity of plants exposed to different manufactured nanomaterials. The role of nanofertilizers and nano-biosensors for improving plant production and protection and the possible toxicities caused by certain nanomaterials, the aspects that are little explored by now, have also been generously elucidated.
Download or read book Nanoscale Fabrication Optimization Scale up and Biological Aspects of Pharmaceutical Nanotechnology written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-12-11 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Fabrication, Optimization, Scale-up and Biological Aspects of Pharmaceutical Nanotechnology focuses on the fabrication, optimization, scale-up and biological aspects of pharmaceutical nanotechnology. In particular, the following aspects of nanoparticle preparation methods are discussed: the need for less toxic reagents, simplification of the procedure to allow economic scale-up, and optimization to improve yield and entrapment efficiency. Written by a diverse range of international researchers, the chapters examine characterization and manufacturing of nanomaterials for pharmaceutical applications. Regulatory and policy aspects are also discussed. This book is a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about how nanomaterials can best be utilized. Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry
Download or read book Nanomaterials Evolution and Advancement towards Therapeutic Drug Delivery Part II written by Surendra Nimesh and published by Bentham Science Publishers. This book was released on 2021-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a vector for the delivery of therapeutic drugs in a controlled and targeted fashion is still a major challenge in the treatment of many diseases. The conventional application of drugs may lead to many limitations including poor distribution, limited effectiveness, lack of selectivity and dose dependent toxicity. An efficient drug delivery system can address these problems. Recent nanotechnology advancements in the biomedical field have the potential to meet these challenges in developing drug delivery systems. Nanomaterials are changing the biomedical platform in terms of disease diagnosis, treatment and prevention. Nanomaterials aided drug delivery provides an advantage by enhancing aqueous solubility that leads to improved bioavailability, increased resistance time in the body, decreased side effects by targeting drugs to the specific location, reduced dose dependent toxicity and protection of drugs from early release. In this two-part book, the contributors have compiled reports of recent studies illustrating the promising nanomaterials that can work as drug carriers which can navigate conventional physiological barriers. A detailed account of several types of nanomaterials including polymeric nanoparticles, liposomes, dendrimers, micelles, carbon nanomaterials, magnetic nanoparticles, solid lipid-based nanoparticles, silica nanomaterials and hydrogels for drug delivery is provided in separate chapters. The contributors also present a discussion on clinical aspects of ongoing research with insights towards future prospects of specific nanotechnologies. Part II covers the following topics: · Solid lipid nanoparticles and nanostructured lipid carriers · Silica based nanomaterials · Hydrogels · Metallic nanoparticles · Computational and experimental binding interactions of drug and β-cyclodextrin · Clinical milestones in nanotherapeutics · Drug delivery systems based on poly(lactide-co-glycolide) and its copolymers The book set is an informative resource for scholars who seek updates in nanomedicine with reference to nanomaterials used in drug delivery systems.
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Smart Nanomaterials in Biomedical Applications written by Jin-Chul Kim and published by Springer Nature. This book was released on 2022-01-19 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the start of 2020, the wrath of pandemic challenged the scientific community to develop more advanced drug delivery approaches for biomedical applications, endowing conventional drugs with additional therapeutic benefits and minimum side effects. Although significant advancements have been done in the field of drug delivery, there is a need to focus towards strategizing novel and improved drug delivery systems that should be convenient and cost-effective to the patients, and simultaneously they should also provide financial benefits to pharmaceutical companies. Controlled drug delivery technology offers ample opportunities and scope for improvising the therapeutic efficacy of drugs via optimizing the drug release rate and time. For this endeavour, smart nanomaterials have served as remarkable candidates for biomedical applications, owing to their ground-breaking properties and design. The development of such nanomaterials requires a broad knowledge related to their physio-chemical properties, molecular structure, mechanisms by which the nanomaterials interact with the cells, and methods by which drugs are released at the site of action. This knowledge must also be allied with the knowledge of signaling crosstalk mechanisms that are modulated by the nanomaterial-drugs composite. It can be anticipated that these emerging drug delivery technologies can facilitate the world to successfully encounter such pandemic outbursts in the future in a cost-effective and time-effective manner. The chapters in this book deal with the advanced technologies and approaches that can benefit advanced students, researchers, and industry experts in developing smart and intelligent nanomaterials for future biomedical applications, and development, manufacturing, and commercialization for controlled and targeted drug delivery.
Download or read book Controlled Growth and Characterization of One dimensional Nano structured Materials written by Yongfu Qiu and published by . This book was released on 2008 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
