Download or read book Control System Design written by Bernard Friedland and published by Courier Corporation. This book was released on 2012-03-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to state-space methods covers feedback control; state-space representation of dynamic systems and dynamics of linear systems; frequency-domain analysis; controllability and observability; shaping the dynamic response; more. 1986 edition.
Download or read book Control System Design written by Graham Clifford Goodwin and published by Pearson. This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).
Download or read book Control System Design Guide written by George Ellis and published by Butterworth-Heinemann. This book was released on 2012-05-15 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title will help engineers to apply control theory to practical systems using their PC. It provides an intuitive approach to controls, avoiding unecessary math and emphasising key concepts with control system models
Download or read book Applied Control Systems Design written by Magdi S. Mahmoud and published by Springer Science & Business Media. This book was released on 2012-04-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these exercises use MATLAB® to make computation and visualization more straightforward. Applied Control System Design will be of interest to academic researchers for its comparison of different systems models and their response to different control methods and will assist graduate students in learning the practical necessities of advanced control system design. The consistent reference to real systems coupled with self-learning tools will assist control practitioners who wish to keep up to date with the latest control design ideas.
Download or read book Control Systems Design written by Vladimir Zakian and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, a comprehensive new framework for the theory and design of control systems has emerged. It treats a range of significant and ubiquitous design problems more effectively than the conventional framework. Control Systems Design brings together contributions from the originators of the new framework in which they explain, expand and revise their research work. It is divided into four parts: - basic principles, including those of matching and inequalities with adjustments for robust matching and matching based on H-infinity methods and linear matrix inequalities; - computational methods, including matching conditions for transient inputs and design of a sampled-data control system; - search methods including search with simulated annealing, genetic algorithms and evaluation of the node array method; - case studies, including applications in distillation, benchmarking critical control of magnetic levitation systems and the use of the principle of matching in cruise control.
Download or read book Introduction to Control System Design First Edition written by Harry Kwatny and published by Cognella Academic Publishing. This book was released on 2020-05-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Control System Design equips students with the basic concepts, tools, and knowledge they need to effectively design automatic control systems. The text not only teaches readers how to design a control system, it inspires them to innovate and expand current methods to address new automation technology challenges and opportunities. The text is designed to support a two-quarter/semester course and is organized into two main parts. Part I covers basic linear system analysis and model-assembly concepts. It presents readers with a short history of control system design and introduces basic control concepts using first-order and second order-systems. Additional chapters address the modeling of mechanical and electrical systems, as well as assembling complex models using subsystem interconnection tools. Part II focuses on linear control system design. Students learn the fundamentals of feedback control systems; stability, regulation, and root locus design; time delay, plant uncertainty, and robust stability; and state feedback and linear quadratic optimization. The final chapter covers observer theory and output feedback control and reformulates the linear quadratic optimization problem as the more general H2 problem.
Download or read book Embedded Control System Design written by Alexandru Forrai and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.
Download or read book Fuzzy Control Systems Design and Analysis written by Kazuo Tanaka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of model-based fuzzy control systems This volume offers full coverage of the systematic framework for the stability and design of nonlinear fuzzy control systems. Building on the Takagi-Sugeno fuzzy model, authors Tanaka and Wang address a number of important issues in fuzzy control systems, including stability analysis, systematic design procedures, incorporation of performance specifications, numerical implementations, and practical applications. Issues that have not been fully treated in existing texts, such as stability analysis, systematic design, and performance analysis, are crucial to the validity and applicability of fuzzy control methodology. Fuzzy Control Systems Design and Analysis addresses these issues in the framework of parallel distributed compensation, a controller structure devised in accordance with the fuzzy model. This balanced treatment features an overview of fuzzy control, modeling, and stability analysis, as well as a section on the use of linear matrix inequalities (LMI) as an approach to fuzzy design and control. It also covers advanced topics in model-based fuzzy control systems, including modeling and control of chaotic systems. Later sections offer practical examples in the form of detailed theoretical and experimental studies of fuzzy control in robotic systems and a discussion of future directions in the field. Fuzzy Control Systems Design and Analysis offers an advanced treatment of fuzzy control that makes a useful reference for researchers and a reliable text for advanced graduate students in the field.
Download or read book Model Reduction for Control System Design written by Goro Obinata and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive treatment of approximation methods for filters and controllers. It is fully up to date, and it is authored by two leading researchers who have personally contributed to the development of some of the methods. Balanced truncation, Hankel norm reduction, multiplicative reduction, weighted methods and coprime factorization methods are all discussed. The book is amply illustrated with examples, and will equip practising control engineers and graduates for intelligent use of commercial software modules for model and controller reduction.
Download or read book Advanced Control System Design written by Bernard Friedland and published by . This book was released on 1996 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stressing the importance of simulation and performance evaluation for effective design, this new text looks at the techniques engineers use to design control systems that work. It covers qualitative behavior and stability theory; graphical methods for nonlinear stability; saturating and discontinuous control; discrete-time systems; adaptive control; and more. For electrical engineers working in modern control system design.
Download or read book Control Systems Design of Bio Robotics and Bio Mechatronics with Advanced Applications written by Ahmad Taher Azar and published by Academic Press. This book was released on 2019-11-30 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Systems Design of Bio-Robotics and Bio-Mechatronics with Advanced Applications delivers essential and advanced bioengineering information on the application of control and robotics technologies in the life sciences. Judging by what we have witnessed so far, this exciting field of control systems and robotics in bioengineering is likely to produce revolutionary breakthroughs over the next decade. While this book is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs, it will also appeal to medical researchers and practitioners who want to enhance their quantitative understanding of physiological processes. - Focuses on the engineering and scientific principles underlying the extraordinary performance of biomedical robotics and bio-mechatronics - Demonstrates the application of principles for designing corresponding algorithms - Presents the latest innovative approaches to medical diagnostics and procedures, as well as clinical rehabilitation from the point-of-view of dynamic modeling, system analysis and control
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Computer Aided Control Systems Design written by Cheng Siong Chin and published by CRC Press. This book was released on 2012-12-12 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Download or read book Robust Industrial Control Systems written by Michael J. Grimble and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems presents a comprehensive introduction to the use of frequency domain and polynomial system design techniques for a range of industrial control and signal processing applications. The solution of stochastic and robust optimal control problems is considered, building up from single-input problems and gradually developing the results for multivariable design of the later chapters. In addition to cataloguing many of the results in polynomial systems needed to calculate industrial controllers and filters, basic design procedures are also introduced which enable cost functions and system descriptions to be specified in order to satisfy industrial requirements. Providing a range of solutions to control and signal processing problems, this book: * Presents a comprehensive introduction to the polynomial systems approach for the solution of H_2 and H_infinity optimal control problems. * Develops robust control design procedures using frequency domain methods. * Demonstrates design examples for gas turbines, marine systems, metal processing, flight control, wind turbines, process control and manufacturing systems. * Includes the analysis of multi-degrees of freedom controllers and the computation of restricted structure controllers that are simple to implement. * Considers time-varying control and signal processing problems. * Addresses the control of non-linear processes using both multiple model concepts and new optimal control solutions. Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems is essential reading for professional engineers requiring an introduction to optimal control theory and insights into its use in the design of real industrial processes. Students and researchers in the field will also find it an excellent reference tool.
Download or read book Control System Design Guide written by George Ellis and published by Academic Press. This book was released on 2012-12-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical approach to control techniques. The author covers background material on analog controllers, digital controllers, and filters. Commonly used controllers are presented. Extended use of PSpice (a popular circuit simulation program) is used in problem solving. The book is also documented with 50 computer programs that circuit designers can use. - Explains integration of control systems with a personal computer - Compares numerous control algorithms in digital and analog form - Details the use of SPICE in problem solving - Presents modeling concepts for linear and nonlinear systems - Examines commonly used controllers
Download or read book Internet based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.
Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer. This book was released on 2012-03-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.
