Download or read book Control Systems Technology written by Curtis D. Johnson and published by Pearson. This book was released on 2002 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents All of the major topics in modern analog and digital control systems, along with the practical, applications oriented knowledge and skills needed by technicians. It contains user-friendly conceptual explanations and clearly written mathematical developments. Examples of both Mathcad and MATLAB illustrate computer problem solving--but this book emphasizes the ability to use any suitable software to achieve successful results in solving problems and performing design. Chapter topics include Measurement; Laplace Transforms; Control System Models; Static and Dynamic Response; Stability; Frequency Response Analysis; Root Locus; State Variable Analysis; Introduction to Discrete Control Systems; Z-Transforms and Discrete State-Space Analysis; Digital Signal Representations; Discrete Time Control Systems; Stability of Discrete Control Systems; and Advanced Topics in Control Systems. For engineers and technicians working for companies that integrate control systems with the use of programmable logic controllers.

Download or read book Control Systems Technology written by L. H. Fenical and published by Delmar Thomson Learning. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad range of topics is covered in this easy-to-understand book on all aspects of control system design and analysis. It begins with a straightforward review of the mathematics required to understand control systems technology, followed by an analysis of both continuous and discrete forms of control systems. Coverage then progresses to the use of MATLABA(R) for the analysis and response simulation of control system functions, such as the use of the SISO design tool and the LTI Viewer functions. Frequency response methods and discrete time systems are also explored in depth, along with the methods used for producing the required simulations using MATLABA(R).

Download or read book Introduction to Control System Technology written by Robert Bateson and published by Merrill Publishing Company. This book was released on 1980 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2010-08-26 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques

Download or read book Control System Technology written by C. J. Chesmond and published by Elsevier. This book was released on 2014-05-12 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control System Technology focuses on the processes, methodologies, and techniques employed in control system technology, including digital computers, transducers, actuators, and amplifiers. The book first takes a look at classification, terminology, and definitions, displacement, reference, and velocity of transducers, and strain, force, torque, acceleration, load, and tension of transducers. Discussions focus on strain gauges and measuring bridges, other transducers for measuring force, torque, acceleration, and tension, displacement and velocity transducers, natural control systems, classification of control systems, and generalized single loop continuous feedback control system. The monograph examines electric amplifiers and final control elements, hydraulic and pneumatic amplifiers and final control elements, flow control valves, actuators and positioners, and signal and data conversion. The publication also ponders on interfacing control systems to digital computers, control system performance and commissioning, and experimental testing of plant, system elements, and systems. The manuscript is a valuable reference for engineers and researchers interested in control system technology.

Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. - Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math - Covers the latest concepts in control systems with embedded digital controllers

Download or read book Modern Control Technology written by Christopher T. Kilian and published by . This book was released on 2001 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, this edition features new material on decibels, levers, friction, clutches and brakes, tooth rotor tachometers, vision sensors, dynamic braking of DC motors, linear motors, and flux vector AC drives. Also included is new information on popular PIC and BASIC Stamp microcontrollers, plus expanded coverage of brushless DC motors and networking used in control systems."--BOOK JACKET.

Download or read book Basic Control System Technology written by C. J. Chesmond and published by Springer. This book was released on 1990 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Systems for Power Electronics written by Mahesh Patil and published by Springer. This book was released on 2015-04-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of the examples with fundamental mathematics along with simulations of the systems with their respective equations and stability calculations.

Download or read book Laplace Transforms and Control Systems Theory for Technology written by Theodore F. Bogart and published by John Wiley & Sons. This book was released on 1982 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of complex algebra and phasors; Transfer functions; Laplace transformation; Network analysis using laplace transforms; Control systems theory. Stability and compensation; Analog computation and simulation; Digital computer simulation; Microprocessor-based control systems; Advanced topics in laplace transforms; Specifications and data sheets for products cited in the examples.

Download or read book Introduction to Control System Technology written by Robert N. Bateson and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Control Systems written by Yuriy P. Kondratenko and published by CRC Press. This book was released on 2022-09-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control Systems: Theory and Applications provides an overview of advanced research lines in control systems as well as in design, development and implementation methodologies for perspective control systems and their components in different areas of industrial and special applications. It consists of extended versions of the selected papers presented at the XXV International Conference on Automatic Control “Automatics 2018” (September 18-19, 2018, Lviv, Ukraine) which is the main Ukrainian Control Conference organized by Ukrainian Association on Automatic Control (National member organization of IFAC) and Lviv National University “Lvivska Politechnica”. More than 100 papers were presented at the conference with topics including: mathematical problems of control, optimization and game theory; control and identification under uncertainty; automated control of technical, technological and biotechnical objects; controlling the aerospace craft, marine vessels and other moving objects; intelligent control and information processing; mechatronics and robotics; information measuring technologies in automation; automation and IT training of personnel; the Internet of things and the latest technologies. The book is divided into two main parts, the first concerning theory (7 chapters) and the second concerning applications (7 chapters) of advanced control systems. The first part “Advances in Theoretical Research on Automatic Control” consists of theoretical research results which deal with descriptor control impulsive delay systems, motion control in condition of conflict, inverse dynamic models, invariant relations in optimal control, robust adaptive control, bio-inspired algorithms, optimization of fuzzy control systems, and extremal routing problem with constraints and complicated cost functions. The second part “Advances in Control Systems Applications” is based on the chapters which consider different aspects of practical implementation of advanced control systems, in particular, special cases in determining the spacecraft position and attitude using computer vision system, the spacecraft orientation by information from a system of stellar sensors, control synthesis of rotational and spatial spacecraft motion at approaching stage of docking, intelligent algorithms for the automation of complex biotechnical objects, an automatic control system for the slow pyrolysis of organic substances with variable composition, simulation complex of hierarchical systems based on the foresight and cognitive modelling, and advanced identification of impulse processes in cognitive maps. The chapters have been structured to provide an easy-to-follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area. This book may be useful for researchers and students who are interesting in advanced control systems.

Download or read book Observers in Control Systems written by George Ellis and published by Elsevier. This book was released on 2002-10-16 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Observers are digital algorithms that combine sensor outputs with knowledge of the system to provide results superior to traditional structures, which rely wholly on sensors. Observers have been used in selected industries for years, but most books explain them with complex mathematics. Observers in Control Systems uses intuitive discussion, software experiments, and supporting analysis to explain the advantages and disadvantages of observers. If you are working in controls and want to improve your control systems, observers could be the technology you need and this book will give you a clear, thorough explanation of how they work and how to use them. Control systems and devices have become the most essential part of nearly all mechanical systems, machines, devices and manufacturing systems throughout the world. Increasingly the efficiency of production, the reliability of output and increased energy savings are a direct result of the quality and deployment of the control system. A modern and essential tool within the engineer's kit is the Observer which helps improve the performance and reduce the cost of these systems. George Ellis is the author of the highly successful Control System Design Guide (Second Edition). Unlike most controls books, which are written by control theorists and academics, Ellis is a leading engineer, designer, author and lecturer working in industry directly with the users of industrial motion control systems. Observers in Control Systems is written for all professional engineers and is designed to be utilized without an in-depth background in control theory. This is a "real-world" book which will demonstrate how observers work and how they can improve your control system. It also shows how observers operate when conditions are not ideal and teaches the reader how to quickly tune an observer in a working system. Software Available online: A free updated and enhanced version of the author's popular Visual ModelQ allows the reader to practice the concepts with Visual ModelQ models on a PC. Based on a virtual laboratory, all key topics are demonstrated with more than twenty control system models. The models are written in Visual ModelQ ,and are available on the Internet to every reader with a PC. - Teaches observers and Kalman filters from an intuitive perspective - Explains how to reduce control system susceptibility to noise - Shows how to design an adaptive controller based on estimating parameter variation using observers - Shows how to improve a control system's ability to reject disturbances - Key topics are demonstrated with PC-based models of control systems. The models are written in both MatLab® and ModelQ; models are available free of charge

Download or read book A First Course in Control System Design written by Kamran Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems are pervasive in our lives. Our homes have environmental controls. The appliances we use, such as the washing machine, microwave, etc. carry embedded controllers in them. We fly in airplanes and drive automobiles that extensively use control systems. The industrial plants that produce consumer goods run on process control systems. The recent drive toward automation has increased our reliance on control systems technology.This book discusses control systems design from a model-based perspective for dynamic system models of single-input single-output type. The emphasis in this book is on understanding and applying the techniques that enable the design of effective control systems in multiple engineering disciplines. The book covers both time-domain and the frequency-domain design methods, as well as controller design for both continuous-time and discrete-time systems. MATLAB© and its Control Systems Toolbox are extensively used for design.

Download or read book Protecting Industrial Control Systems from Electronic Threats written by Joseph Weiss and published by Momentum Press. This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS

Download or read book Optimal Control Systems written by D. Subbaram Naidu and published by CRC Press. This book was released on 2018-10-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of optimal control systems has grown and flourished since the 1960's. Many texts, written on varying levels of sophistication, have been published on the subject. Yet even those purportedly designed for beginners in the field are often riddled with complex theorems, and many treatments fail to include topics that are essential to a thorough grounding in the various aspects of and approaches to optimal control. Optimal Control Systems provides a comprehensive but accessible treatment of the subject with just the right degree of mathematical rigor to be complete but practical. It provides a solid bridge between "traditional" optimization using the calculus of variations and what is called "modern" optimal control. It also treats both continuous-time and discrete-time optimal control systems, giving students a firm grasp on both methods. Among this book's most outstanding features is a summary table that accompanies each topic or problem and includes a statement of the problem with a step-by-step solution. Students will also gain valuable experience in using industry-standard MATLAB and SIMULINK software, including the Control System and Symbolic Math Toolboxes. Diverse applications across fields from power engineering to medicine make a foundation in optimal control systems an essential part of an engineer's background. This clear, streamlined presentation is ideal for a graduate level course on control systems and as a quick reference for working engineers.

Download or read book Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2008-08-12 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. Whether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources. - Helps engineers and researchers correctly and efficiently implement their projects - An indispensable guide and references for anyone involved in control, automation, computer networks and robotics - Equally suitable for industry and academia