Download or read book Control of Underactuated Manipulators written by Jundong Wu and published by Springer Nature. This book was released on 2023-05-13 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates in detail cutting-edge technologies of underactuated manipulator control, which is a frontier topic in robotics that possesses great significance in energy conservation as well as fault tolerance for industrial applications. It is also the crucial technology associated with systems in special environments, including underwater or aerospace environments. So far, the topic of underactuated manipulator control has attracted engineers and scientists from various disciplines, such as applied physics, material, automation and robotics. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while emphasizing the importance of design and optimization in the control of underactuated manipulators. Chapters of the book cover a wide variety of manipulator systems, including vertical underactuated manipulator, planar underactuated manipulator with first-order nonholonomic constraint, planar underactuated manipulator with second-order nonholonomic constraint and flexible underactuated manipulator. The book is intended for undergraduate and graduate students that are interested in underactuated manipulators, researchers that investigate the design and optimization for controllers of underactuated manipulators and engineers working with underactuated systems.

Download or read book Robotic Manipulators and Vehicles written by Gerasimos Rigatos and published by Springer. This book was released on 2018-05-24 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.

Download or read book Motion Control of Underactuated Mechanical Systems written by Javier Moreno-Valenzuela and published by Springer. This book was released on 2017-07-11 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first to present a unified perspective on the control of underactuated mechanical systems. Based on real-time implementation of parameter identification, this book provides a variety of algorithms for the Furuta pendulum and the inertia wheel pendulum, which are two-degrees-of-freedom mechanical systems. Specifically, this work addresses and solves the problem of motion control via trajectory tracking in one joint coordinate while another joint is regulated. Besides, discussions on extensions to higher degrees-of-freedom systems are given. The book, aimed at control engineers as well as graduate students, ranges from the problem of parameter identification of the studied systems to the practical implementation of sophisticated motion control algorithms. Offering real-world solutions to manage the control of underactuated systems, this book provides a concise tutorial on recent breakthroughs in the field, original procedures to achieve bounding of the error trajectories, convergence and gain tuning guidelines.

Download or read book Linear and Nonlinear Instabilities in Mechanical Systems written by Hiroshi Yabuno and published by John Wiley & Sons. This book was released on 2021-02-03 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: LINEAR and NONLINEAR INSTABILITIES in MECHANICAL SYSTEMS An in-depth insight into nonlinear analysis and control As mechanical systems become lighter, faster, and more flexible, various nonlinear instability phenomena can occur in practical systems. The fundamental knowledge of nonlinear analysis and control is essential to engineers for analysing and controlling nonlinear instability phenomena. This book bridges the gap between the mathematical expressions of nonlinear dynamics and the corresponding practical phenomena. Linear and Nonlinear Instabilities in Mechanical Systems: Analysis, Control and Application provides a detailed and informed insight into the fundamental methods for analysis and control for nonlinear instabilities from the practical point of view. Key features: Refers to the behaviours of practical mechanical systems such as aircraft, railway vehicle, robot manipulator, micro/nano sensor Enhances the rigorous and practical understanding of mathematical methods from an engineering point of view The theoretical results obtained by nonlinear analysis are interpreted by using accompanying videos on the real nonlinear behaviors of nonlinear mechanical systems Linear and Nonlinear Instabilities in Mechanical Systems is an essential textbook for students on engineering courses, and can also be used for self-study or reference by engineers.

Download or read book Advances in Applied Nonlinear Optimal Control written by Gerasimos Rigatos and published by Cambridge Scholars Publishing. This book was released on 2020-11-19 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses advances in applied nonlinear optimal control, comprising both theoretical analysis of the developed control methods and case studies about their use in robotics, mechatronics, electric power generation, power electronics, micro-electronics, biological systems, biomedical systems, financial systems and industrial production processes. The advantages of the nonlinear optimal control approaches which are developed here are that, by applying approximate linearization of the controlled systems’ state-space description, one can avoid the elaborated state variables transformations (diffeomorphisms) which are required by global linearization-based control methods. The book also applies the control input directly to the power unit of the controlled systems and not on an equivalent linearized description, thus avoiding the inverse transformations met in global linearization-based control methods and the potential appearance of singularity problems. The method adopted here also retains the known advantages of optimal control, that is, the best trade-off between accurate tracking of reference setpoints and moderate variations of the control inputs. The book’s findings on nonlinear optimal control are a substantial contribution to the areas of nonlinear control and complex dynamical systems, and will find use in several research and engineering disciplines and in practical applications.

Download or read book International Symposium on History of Machines and MechanismsProceedings HMM 2000 written by Marco Ceccarelli and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on History of Machines and Mechanisms is a new initiative to promote explicitly researches and publications in the field of the History of TMM (Theory of Machines and Mechanisms). It was held at the University of Cassino, Italy, from 11 to 13 May 2000. The Symposium was devoted mainly to the technical aspects of historical developments and therefore it has been addressed mainly to the IFToMM Community. In fact, most the authors of the contributed papers are experts in TMM and related topics. This has been, indeed, a challenge: convincing technical experts to go further in-depth into the background of their topics of expertise. We have received a very positive response, as can be seen by the fact that these Proceedings contain contributions by authors from all around the world. We received about 50 papers, and after review about 40 papers were accepted for both presentation and publishing in the Proceedings. This means also that the History of TMM is of interest everywhere and, indeed, an in-depth knowledge of the past can be of great help in working on the present and in shaping the future with new ideas. I believe that a reader will take advantage of the papers in these Proceedings with further satisfaction and motivation for her or his work (historical or not). These papers cover the wide field of the History of Mechanical Engineering and particularly the History of TMM.

Download or read book Underactuated Robotic Hands written by Lionel Birglen and published by Springer Science & Business Media. This book was released on 2008-02-11 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a cornerstone publication in robotic grasping. The authors have developed an internationally recognized expertise in this area. Additionally, they designed and built several prototypes which attracted the attention of the scientific community. The purpose of this book is to summarize years of research and to present, in an attractive format, the expertise developed by the authors on a new technology for grasping which has achieved great success both in theory and in practice.

Download or read book Fundamentals in Modeling and Control of Mobile Manipulators written by Zhijun Li and published by CRC Press. This book was released on 2013-06-04 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile manipulators combine the advantages of mobile platforms and robotic arms, extending their operational range and functionality to large spaces and remote, demanding, and/or dangerous environments. They also bring complexity and difficulty in dynamic modeling and control system design. However, advances in nonlinear system analysis and control system design offer powerful tools and concepts for the control of mobile manipulator systems. Fundamentals in Modeling and Control of Mobile Manipulators presents a thorough theoretical treatment of several fundamental problems for mobile robotic manipulators. The book integrates fresh concepts and state-of-the-art results to systematically examine kinematics and dynamics, motion generation, feedback control, coordination, and cooperation. From this treatment, the authors form a basic theoretical framework for a mobile robotic manipulator that extends the theory of nonlinear control and applies to more realistic problems. Drawing on their research over the past ten years, the authors propose novel control theory concepts and techniques to tackle key problems. Topics covered include kinematic and dynamic modeling, control of nonholonomic systems, path planning that considers motion and manipulation, hybrid motion/force control and hybrid position/force control where the mobile manipulator is required to interact with environments, and coordination and cooperation strategies for multiple mobile manipulators. The book also includes practical examples of applications in engineering systems. This timely book investigates important scientific and engineering issues for researchers and engineers working with either single or multiple mobile manipulators for larger operational space, better cooperation, and improved productivity.

Download or read book Intelligent Unmanned Systems Theory and Applications written by Agus Budiyono and published by Springer Science & Business Media. This book was released on 2009-03-20 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book largely represents the extended version of select papers from the Inter- tional Conference on Intelligent Unmanned System ICIUS 2007 which was jointly organized by the Center for Unmanned System Studies at Institut Teknologi Bandung, Artificial Muscle Research Center at Konkuk University and Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astrona- ics. The joint-event was the 3rd conference extending from International Conference on Emerging System Technology (ICEST) in 2005 and International Conference on Technology Fusion (ICTF) in 2006 both conducted in Seoul. ICIUS 2007 was focused on both theory and application primarily covering the topics on robotics, autonomous vehicles and intelligent unmanned technologies. The conference was arranged into three parallel symposia with the following scope of topics: Unmanned Systems: Micro air vehicle, Underwater vehicle, Micro-satellite, - manned aerial vehicle, Multi-agent systems, Autonomous ground vehicle, Blimp, Swarm intelligence, learning and control Robotics and Biomimetics: Artificial muscle actuators, Smart sensors, Design and applications of MEMS/NEMS system, Intelligent robot system, Evolutionary al- rithm, Control of biological systems, AI and expert systems, Biological learning control systems, Neural networks, Genetic algorithm Control and Intelligent System: Distributed intelligence, Distributed/decentralized intelligent control, Distributed or decentralized control methods, Distributed and - bedded systems, Embedded intelligent control, Complex systems, Discrete event s- tems, Hybrid systems, Networked control systems, Delay systems, Fuzzy systems, Identification and estimation, Nonlinear systems, Precision motion control, Control applications, Control engineering education.

Download or read book Robot Control 2003 SYROCO 03 written by Ignacy Duleba and published by Elsevier. This book was released on 2004-04-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: SYROCO'2003 covered areas and aspects of robot control Topics: Robot control techniques (adaptive, robust, learning) Modeling and identification Control of discrete / continuous-time robotic systems Non-holonomic robotic systems Intelligent control Control based on sensing Control design and architectures Force and compliance control Grasp control Flexible robots Micro robots Mobile robots Walking robots Humanoid robots Teleoperation and man / machine dynamic systems Multi-Robot-Systems, cooperative robots Applications: space, underwater, civil engineering, surgery, entertainment, mining, etc. *Provides the latest research on Robotics *Contains contributions written by experts in the field. *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.

Download or read book Dynamics of Underactuated Multibody Systems written by Robert Seifried and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underactuated multibody systems are intriguing mechatronic systems, as they posses fewer control inputs than degrees of freedom. Some examples are modern light-weight flexible robots and articulated manipulators with passive joints. This book investigates such underactuated multibody systems from an integrated perspective. This includes all major steps from the modeling of rigid and flexible multibody systems, through nonlinear control theory, to optimal system design. The underlying theories and techniques from these different fields are presented using a self-contained and unified approach and notation system. Subsequently, the book focuses on applications to large multibody systems with multiple degrees of freedom, which require a combination of symbolical and numerical procedures. Finally, an integrated, optimization-based design procedure is proposed, whereby both structural and control design are considered concurrently. Each chapter is supplemented by illustrated examples.

Download or read book NASA Tech Briefs written by and published by . This book was released on 1994 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Control of Robots written by Adriano A. G. Siqueira and published by Springer Science & Business Media. This book was released on 2011-08-14 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control of Robots bridges the gap between robust control theory and applications, with a special focus on robotic manipulators. It is divided into three parts: robust control of regular, fully-actuated robotic manipulators; robust post-failure control of robotic manipulators; and robust control of cooperative robotic manipulators. In each chapter the mathematical concepts are illustrated with experimental results obtained with a two-manipulator system. They are presented in enough detail to allow readers to implement the concepts in their own systems, or in Control Environment for Robots, a MATLAB®-based simulation program freely available from the authors. The target audience for Robust Control of Robots includes researchers, practicing engineers, and graduate students interested in implementing robust and fault tolerant control methodologies to robotic manipulators.

Download or read book Block Backstepping Design of Nonlinear State Feedback Control Law for Underactuated Mechanical Systems written by Shubhobrata Rudra and published by Springer. This book was released on 2016-09-08 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel, generalized approach to the design of nonlinear state feedback control laws for a large class of underactuated mechanical systems based on application of the block backstepping method. The control law proposed here is robust against the effects of model uncertainty in dynamic and steady-state performance and addresses the issue of asymptotic stabilization for the class of underactuated mechanical systems. An underactuated system is defined as one for which the dimension of space spanned by the configuration vector is greater than that of the space spanned by the control variables. Control problems concerning underactuated systems currently represent an active field of research due to their broad range of applications in robotics, aerospace, and marine contexts. The book derives a generalized theory of block backstepping control design for underactuated mechanical systems, and examines several case studies that cover interesting examples of underactuated mechanical systems. The mathematical derivations are described using well-known notations and simple algebra, without the need for any special previous background in higher mathematics. The chapters are lucidly described in a systematic manner, starting with control system preliminaries and moving on to a generalized description of the block backstepping method, before turning to several case studies. Simulation and experimental results are also provided to aid in reader comprehension.

Download or read book Intelligent Robotics and Applications written by Xin-Jun Liu and published by Springer Nature. This book was released on 2021-10-19 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4-volume set LNAI 13013 – 13016 constitutes the proceedings of the 14th International Conference on Intelligent Robotics and Applications, ICIRA 2021, which took place in Yantai, China, during October 22-25, 2021. The 299 papers included in these proceedings were carefully reviewed and selected from 386 submissions. They were organized in topical sections as follows: Robotics dexterous manipulation; sensors, actuators, and controllers for soft and hybrid robots; cable-driven parallel robot; human-centered wearable robotics; hybrid system modeling and human-machine interface; robot manipulation skills learning; micro_nano materials, devices, and systems for biomedical applications; actuating, sensing, control, and instrumentation for ultra-precision engineering; human-robot collaboration; robotic machining; medical robot; machine intelligence for human motion analytics; human-robot interaction for service robots; novel mechanisms, robots and applications; space robot and on-orbit service; neural learning enhanced motion planning and control for human robot interaction; medical engineering.

Download or read book Mechatronics Robotics and Automation written by Yun Hae Kim and published by Trans Tech Publications Ltd. This book was released on 2013-08-30 with total page 2444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Mechatronics, Robotics and Automation (ICMRA 2013), June 13-14, 2013, Guangzhou, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 447 papers are grouped as follows: Chapter 1: Theory of Mechanisms and Dynamic Systems; Chapter 2: Design and Control in Modern Mechantronics System Engineering; Chapter 3: Robotics and Real World Applications; Chapter 4: Sensor, Actuator Technology and Wireless Sensor Networks Applications; Chapter 5: Fluid and Flow Engineering, Control Technology; Chapter 6: Voice, Image and Video Processing, Recognition Technologies; Chapter 7: Signal Processing Systems Design and Implementation; Chapter 8: Measurement, Detection and Monitoring, Testing and Instruments; Chapter 9: Artificial Intelligence Techniques and Optimization Algorithms; Chapter 10: Intelligent Control Systems, Automation and Power Engineering; Chapter 11: Electronics/Microelectronics and Embedded Systems; Chapter 12: Computer Applications in Industry and Engineering, Computational and Mathematical Methods and Modelling; Chapter 13: Materials and Processing Technologies; Chapter 14: Product Design and Manufacture; Chapter 15: Industrial Engineering, Management and Education Engineering Applications.

Download or read book Control and Filtering for Semi Markovian Jump Systems written by Fanbiao Li and published by Springer. This book was released on 2016-11-04 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date research developments and novel methodologies on semi-Markovian jump systems (S-MJS). It presents solutions to a series of problems with new approaches for the control and filtering of S-MJS, including stability analysis, sliding mode control, dynamic output feedback control, robust filter design, and fault detection. A set of newly developed techniques such as piecewise analysis method, positively invariant set approach, event-triggered method, and cone complementary linearization approaches are presented. Control and Filtering for Semi-Markovian Jump Systems is a comprehensive reference for researcher and practitioners working in control engineering, system sciences and applied mathematics, and is also a useful source of information for senior undergraduates and graduates in these areas. The readers will benefit from some new concepts, new models and new methodologies with practical significance in control engineering and signal processing.