Download or read book Cause and Control of Transverse Cracking in Concrete Bridge Decks written by M. Ala Saadeghvaziri and published by . This book was released on 2002 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many concrete bridge decks develop transverse cracking and most of these cracks develop at early ages, some right after construction and some after the bridge has been opened to traffic for a period of time. Structural design factors have not been the subject of much research in the past and they were the main thrust of this research study. Using 2-D and 3-D linear and nonlinear finite element models many design factors such as girder stiffness, deck thickness, girder spacing, relative stiffness of deck to girder, amount of reinforcements, etc., were studied. The research study also included a comprehensive review of the existing literature as well as survey of 24 bridges in the state of New Jersey. Results of each research task are presented and discussed in detail. Furthermore, based on analytical results and literature review, the effect of various factors are quantified and specific recommendations for possible consideration in design are made.
Download or read book Transactions of the American Society of Civil Engineers written by American Society of Civil Engineers and published by . This book was released on 2005 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 29-30 contain papers of the International Engineering Congress, Chicago, 1893; v. 54, pts. A-F, papers of the International Engineering Congress, St. Louis, 1904.
Download or read book Specifications for Structural Concrete ACI 301 05 with Selected ACI References written by American Concrete Institute and published by American Concrete Institute. This book was released on 2005 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete Textbook Volume 4 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-06-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1979 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ACI Materials Journal written by and published by . This book was released on 2004 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Principles of Concrete Structures written by Xianglin Gu and published by Springer. This book was released on 2015-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.
Download or read book Numerical Modelling of Discrete Materials in Geotechnical Engineering Civil Engineering and Earth Sciences written by Heinz Konietzky and published by CRC Press. This book was released on 2004-10-15 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this fully up-to-date volume, important new developments and applications of discrete element modelling are highlighted and brought together for presentation at the First International UDEC/3DEC Symposium. Papers covered the following key areas: * behaviour of masonry structures (walls, bridges, towers, columns) * stability and deformation of tunnels and caverns in fractured rock masses * geomechanical modelling for mining and waste repositories * rock reinforcement design (anchors, shotcrete, bolts) * mechanical and hydro-mechanical behaviour of dams and foundations * rock slope stability, deformation and failure mechanisms * modelling of fundamental rock mechanical problems * modelling of geological processes * constitutive laws for fractured rock masses and masonry structures * dynamic behaviour of discrete structures. Numerical Modelling of Discrete Materials in Geotechnical Engineering, Civil Engineering, and Earth Sciences provides an ultra-modern, in-depth analysis of discrete element modelling in a range of different fields, thus proving valuable reading for civil, mining, and geotechnical engineers, as well as other interested professionals.
Download or read book Computing Developments in Civil and Structural Engineering written by B. Kumar and published by . This book was released on 1999 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains a selection of papers presented at The Seventh International Conference on Civil and Structural Engineering and The Fifth International Conference on the Applications of Artificial Intelligence to Civil and Structural Engineering, held concurrently from 13-15 September 1999, at Oxford, England.
Download or read book Control of Cracking in Reinforced Concrete Structures written by Francis Barre and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new guidelines for the control of cracking in massive reinforced and prestressed concrete structures. Understanding this behavior during construction allows engineers to ensure properties such as durability, reliability, and water- and air-tightness throughout a structure’s lifetime. Based on the findings of the French national CEOS.fr project, the authors extend existing engineering standards and codes to advance the measurement and prediction of cracking patterns. Various behaviors of concrete under load are explored within the chapters of the book. These include cracking of ties, beams and in walls, and the simulation and evaluation of cracking, shrinkage and creep. The authors propose new engineering rules for crack width and space assessment of cracking patterns, and provide recommendations for measurement devices and protocols. Intended as a reference for design and civil engineers working on construction projects, as well as to aid further work in the research community, applied examples are provided at the end of each chapter in the form of expanded measurement methods, calculations and commentary on models.
Download or read book HRIS Abstracts written by and published by . This book was released on 1990 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Launching written by Marco Rosignoli and published by Thomas Telford. This book was released on 2002 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book is an essential purchase for all those involved in bridge construction and innovative building techniques, such as bridge owners, design offices, bridge consultants, and construction equipment suppliers."--BOOK JACKET.
Download or read book Bridge Needs Design and Performance written by National Research Council (U.S.). Transportation Research Board and published by . This book was released on 1987 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Register of Research written by Great Britain. Department of the Environment and published by . This book was released on 1976 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transportation Economics written by and published by Transportation Research Board National Research. This book was released on 1987 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ACI Structural Journal written by and published by . This book was released on 1994 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Maintenance Safety Management Resilience and Sustainability written by Fabio Biondini and published by CRC Press. This book was released on 2012-06-21 with total page 4119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Resilience and Sustainability contains the lectures and papers presented at The Sixth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), held in Stresa, Lake Maggiore, Italy, 8-12 July, 2012. This volume consists of a book of extended abstracts (800 pp) Extensive collection of revised expert papers on recent advances in bridge maintenance, safety, management and life-cycle performance, representing a major contribution to the knowledge base of all areas of the field.
