Download or read book Nonlinear Control of Vehicles and Robots written by Béla Lantos and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control of Vehicles and Robots develops a unified approach to the dynamic modeling of robots in terrestrial, aerial and marine environments. The main classes of nonlinear systems and stability methods are summarized and basic nonlinear control methods, useful in manipulator and vehicle control, are presented. Formation control of ground robots and ships is discussed. The book also deals with the modeling and control of robotic systems in the presence of non-smooth nonlinearities. Robust adaptive tracking control of robotic systems with unknown payload and friction in the presence of uncertainties is treated. Theoretical and practical aspects of the control algorithms under discussion are detailed. Examples are included throughout the book allowing the reader to apply the control and modeling techniques in their own research and development work. Some of these examples demonstrate state estimation based on the use of advanced sensors as part of the control system.

Download or read book Non identifier Based Adaptive Control in Mechatronics written by Christoph M. Hackl and published by Springer. This book was released on 2018-07-28 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces non-identifier-based adaptive control (with and without internal model) and its application to the current, speed and position control of mechatronic systems such as electrical synchronous machines, wind turbine systems, industrial servo systems, and rigid-link, revolute-joint robots. In mechatronics, there is often only rough knowledge of the system. Due to parameter uncertainties, nonlinearities and unknown disturbances, model-based control strategies can reach their performance or stability limits without iterative controller design and performance evaluation, or system identification and parameter estimation. The non-identifier-based adaptive control presented is an alternative that neither identifies the system nor estimates its parameters but ensures stability. The adaptive controllers are easy to implement, compensate for disturbances and are inherently robust to parameter uncertainties and nonlinearities. For controller implementation only structural system knowledge (like relative degree, input-to-state stable zero dynamics and known sign of the high-frequency gain) is required. Moreover, the presented controllers guarantee reference tracking with prescribed asymptotic or transient accuracy, i.e. the tracking error eventually tends to or for all time evolves within an a priori specified region. The book presents the theory, modeling and application in a general but detailed and self-contained manner, making it easy to read and understand, particularly for newcomers to the topics covered

Download or read book Dynamic Surface Control of Uncertain Nonlinear Systems written by Bongsob Song and published by Springer Science & Business Media. This book was released on 2011-05-16 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the problem of nonlinear controller design is as old as that of linear controller design, the systematic design methods framed in response are more sparse. Given the range and complexity of nonlinear systems, effective new methods of control design are therefore of significant importance. Dynamic Surface Control of Uncertain Nonlinear Systems provides a theoretically rigorous and practical introduction to nonlinear control design. The convex optimization approach applied to good effect in linear systems is extended to the nonlinear case using the new dynamic surface control (DSC) algorithm developed by the authors. A variety of problems – DSC design, output feedback, input saturation and fault-tolerant control among them – are considered. The inclusion of applications material demonstrates the real significance of the DSC algorithm, which is robust and easy to use, for nonlinear systems with uncertainty in automotive and robotics. Written for the researcher and graduate student of nonlinear control theory, this book will provide the applied mathematician and engineer alike with a set of powerful tools for nonlinear control design. It will also be of interest to practitioners working with a mechatronic systems in aerospace, manufacturing and automotive and robotics, milieux.

Download or read book Nonlinear Control Systems 2004 written by Frank Allgower and published by Elsevier. This book was released on 2005-02-02 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer aided Nonlinear Control System Design written by Amir Nassirharand and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic computer-aided approach provides a versatile setting for the control engineer to overcome the complications of controller design for highly nonlinear systems. Computer-aided Nonlinear Control System Design provides such an approach based on the use of describing functions. The text deals with a large class of nonlinear systems without restrictions on the system order, the number of inputs and/or outputs or the number, type or arrangement of nonlinear terms. The strongly software-oriented methods detailed facilitate fulfillment of tight performance requirements and help the designer to think in purely nonlinear terms, avoiding the expedient of linearization which can impose substantial and unrealistic model limitations and drive up the cost of the final product. Design procedures are presented in a step-by-step algorithmic format each step being a functional unit with outputs that drive the other steps. This procedure may be easily implemented on a digital computer with example problems from mechatronic and aerospace design being used to demonstrate the techniques discussed. The author’s commercial MATLAB®-based environment, available separately from insert URL here, can be used to create simulations showing the results of using the computer-aided control system design ideas characterized in the text. Academic researchers and graduate students studying nonlinear control systems and control engineers dealing with nonlinear plant, particularly mechatronic or aerospace systems will find Computer-aided Nonlinear Control System Design to be of great practical assistance adding to their toolbox of techniques for dealing with system nonlinearities. A basic knowledge of calculus, nonlinear analysis and software engineering will enable the reader to get the best from this book.

Download or read book Opto Mechatronic Systems Handbook written by Hyungsuck Cho and published by CRC Press. This book was released on 2002-09-30 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-mechatronics-the fusion of optical and mechatronic technologies-has been integral in the evolution of machines, systems, and products that are smaller and more precise, more intelligent, and more autonomous. For the technology to reach its full potential, however, engineers and researchers from many disciplines must learn to work together thro

Download or read book Mechatronic System Control Logic and Data Acquisition written by Robert H. Bishop and published by CRC Press. This book was released on 2017-12-19 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a convenient and flexible source of specific information. This seminal work is still the most exhaustive, state-of-the-art treatment of the field available. Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and systems control, computers, logic systems, software, and data acquisition. It begins with coverage of the role of control and the role modeling in mechatronic design, setting the stage for the more fundamental discussions on signals and systems. The volume reflects the profound impact the development of not just the computer, but the microcomputer, embedded computers, and associated information technologies and software advances. The final sections explore issues surrounding computer software and data acquisition. Covers modern aspects of control design using optimization techniques from H2 theory Discusses the roles of adaptive and nonlinear control and neural networks and fuzzy systems Includes discussions of design optimization for mechatronic systems and real-time monitoring and control Focuses on computer hardware and associated issues of logic, communication, networking, architecture, fault analysis, embedded computers, and programmable logic controllers

Download or read book Non linear Control for Underactuated Mechanical Systems written by Isabelle Fantoni and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of modern control theory to some important underactuated mechanical systems, from the inverted pendulum to the helicopter model. It will help readers gain experience in the modelling of mechanical systems and familiarize with new control methods for non-linear systems.

Download or read book Nonlinear Control Techniques for Electro Hydraulic Actuators in Robotics Engineering written by Qing Guo and published by CRC Press. This book was released on 2017-08-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering meets the needs of those working in advanced electro-hydraulic controls for modern mechatronic and robotic systems. The non-linear EHS control methods covered are proving to be more effective than traditional controllers, such as PIDs. The control strategies given address parametric uncertainty, unknown external load disturbance, single-rod actuator characteristics, and control saturation. Theoretical and experimental validations are explained, and examples provided. Based on the authors' cutting-edge research, this work is an important resource for engineers, researchers, and students working in EHS.

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2002-02-26 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has evolved into a way of life in engineering practice, and indeed pervades virtually every aspect of the modern world. As the synergistic integration of mechanical, electrical, and computer systems, the successful implementation of mechatronic systems requires the integrated expertise of specialists from each of these areas. De

Download or read book Advances in Applied Nonlinear Optimal Control written by Gerasimos Rigatos and published by Cambridge Scholars Publishing. This book was released on 2020-11-19 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses advances in applied nonlinear optimal control, comprising both theoretical analysis of the developed control methods and case studies about their use in robotics, mechatronics, electric power generation, power electronics, micro-electronics, biological systems, biomedical systems, financial systems and industrial production processes. The advantages of the nonlinear optimal control approaches which are developed here are that, by applying approximate linearization of the controlled systems’ state-space description, one can avoid the elaborated state variables transformations (diffeomorphisms) which are required by global linearization-based control methods. The book also applies the control input directly to the power unit of the controlled systems and not on an equivalent linearized description, thus avoiding the inverse transformations met in global linearization-based control methods and the potential appearance of singularity problems. The method adopted here also retains the known advantages of optimal control, that is, the best trade-off between accurate tracking of reference setpoints and moderate variations of the control inputs. The book’s findings on nonlinear optimal control are a substantial contribution to the areas of nonlinear control and complex dynamical systems, and will find use in several research and engineering disciplines and in practical applications.

Download or read book System Dynamics written by Dean C. Karnopp and published by John Wiley & Sons. This book was released on 2012-03-07 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expanded new edition of the bestselling system dynamics book using the bond graph approach A major revision of the go-to resource for engineers facing the increasingly complex job of dynamic systems design, System Dynamics, Fifth Edition adds a completely new section on the control of mechatronic systems, while revising and clarifying material on modeling and computer simulation for a wide variety of physical systems. This new edition continues to offer comprehensive, up-to-date coverage of bond graphs, using these important design tools to help readers better understand the various components of dynamic systems. Covering all topics from the ground up, the book provides step-by-step guidance on how to leverage the power of bond graphs to model the flow of information and energy in all types of engineering systems. It begins with simple bond graph models of mechanical, electrical, and hydraulic systems, then goes on to explain in detail how to model more complex systems using computer simulations. Readers will find: New material and practical advice on the design of control systems using mathematical models New chapters on methods that go beyond predicting system behavior, including automatic control, observers, parameter studies for system design, and concept testing Coverage of electromechanical transducers and mechanical systems in plane motion Formulas for computing hydraulic compliances and modeling acoustic systems A discussion of state-of-the-art simulation tools such as MATLAB and bond graph software Complete with numerous figures and examples, System Dynamics, Fifth Edition is a must-have resource for anyone designing systems and components in the automotive, aerospace, and defense industries. It is also an excellent hands-on guide on the latest bond graph methods for readers unfamiliar with physical system modeling.

Download or read book Nonlinear Control and Filtering Using Differential Flatness Approaches written by Gerasimos G. Rigatos and published by Springer. This book was released on 2015-06-05 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent advances in differential flatness theory and analyzes its use for nonlinear control and estimation. It shows how differential flatness theory can provide solutions to complicated control problems, such as those appearing in highly nonlinear multivariable systems and distributed-parameter systems. Furthermore, it shows that differential flatness theory makes it possible to perform filtering and state estimation for a wide class of nonlinear dynamical systems and provides several descriptive test cases. The book focuses on the design of nonlinear adaptive controllers and nonlinear filters, using exact linearization based on differential flatness theory. The adaptive controllers obtained can be applied to a wide class of nonlinear systems with unknown dynamics, and assure reliable functioning of the control loop under uncertainty and varying operating conditions. The filters obtained outperform other nonlinear filters in terms of accuracy of estimation and computation speed. The book presents a series of application examples to confirm the efficiency of the proposed nonlinear filtering and adaptive control schemes for various electromechanical systems. These include: · industrial robots; · mobile robots and autonomous vehicles; · electric power generation; · electric motors and actuators; · power electronics; · internal combustion engines; · distributed-parameter systems; and · communication systems. Differential Flatness Approaches to Nonlinear Control and Filtering will be a useful reference for academic researchers studying advanced problems in nonlinear control and nonlinear dynamics, and for engineers working on control applications in electromechanical systems.

Download or read book The Reaction Wheel Pendulum written by Daniel J. Block and published by Morgan & Claypool Publishers. This book was released on 2007-12-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes the Reaction Wheel Pendulum, the newest inverted-pendulum-like device for control education and research. We discuss the history and background of the reaction wheel pendulum and other similar experimental devices. We develop mathematical models of the reaction wheel pendulum in depth, including linear and nonlinear models, and models of the sensors and actuators that are used for feedback control. We treat various aspects of the control problem, from linear control of themotor, to stabilization of the pendulum about an equilibrium configuration using linear control, to the nonlinear control problem of swingup control. We also discuss hybrid and switching control, which is useful for switching between the swingup and balance controllers. We also discuss important practical issues such as friction modeling and friction compensation, quantization of sensor signals, and saturation. This monograph can be used as a supplement for courses in feedback control at the undergraduate level, courses in mechatronics, or courses in linear and nonlinear state space control at the graduate level. It can also be used as a laboratory manual and as a reference for research in nonlinear control.

Download or read book Dynamics of Underactuated Multibody Systems written by Robert Seifried and published by Springer Science & Business Media. This book was released on 2013-11-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underactuated multibody systems are intriguing mechatronic systems, as they posses fewer control inputs than degrees of freedom. Some examples are modern light-weight flexible robots and articulated manipulators with passive joints. This book investigates such underactuated multibody systems from an integrated perspective. This includes all major steps from the modeling of rigid and flexible multibody systems, through nonlinear control theory, to optimal system design. The underlying theories and techniques from these different fields are presented using a self-contained and unified approach and notation system. Subsequently, the book focuses on applications to large multibody systems with multiple degrees of freedom, which require a combination of symbolical and numerical procedures. Finally, an integrated, optimization-based design procedure is proposed, whereby both structural and control design are considered concurrently. Each chapter is supplemented by illustrated examples.

Download or read book Advanced Mechatronics written by Dan S. Necsulescu and published by World Scientific. This book was released on 2009 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents issues regarding remote measurements and indirect monitoring and control of distributed systems in the general framework of ill-posed inverse problems. This book provides an overview of the main results in the inverse problem theory. It offers a presentation of basic results in discrete inverse theory.

Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition organizes cutting-edge contributions from more than 200 leading experts. The second volume, Control System Applications, includes 35 entirely new applications organized by subject area. Covering the design and use of control systems, this volume includes applications for: Automobiles, including PEM fuel cells Aerospace Industrial control of machines and processes Biomedical uses, including robotic surgery and drug discovery and development Electronics and communication networks Other applications are included in a section that reflects the multidisciplinary nature of control system work. These include applications for the construction of financial portfolios, earthquake response control for civil structures, quantum estimation and control, and the modeling and control of air conditioning and refrigeration systems. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances. Progressively organized, the other two volumes in the set include: Control System Fundamentals Control System Advanced Methods