Download or read book Control of Ground and Aerial Robots written by Mario Sarcinelli-Filho and published by Springer Nature. This book was released on 2023-01-19 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is kinematic and dynamic control of a single mobile robot or a group of them. New simple and integrated solutions are presented for tasks of positioning, trajectory tracking and path following. Control of Ground and Aerial Robots synthesizes new results on control of mobile robots developed by M.Sc. and Ph.D. students supervised by the authors. The robots considered are wheeled mobile platforms, with emphasis on differential drive vehicles, and the multirotor aerial robots. Integrated control solutions based on the technique of feedback linearization are proposed to guide either a single robot or a homogeneous/heterogeneous group of mobile robots. Examples on the use of the proposed controllers are also provided. Finally, Control of Ground and Aerial Robots is intended to help graduate and advanced undergraduate students in engineering, as well as researchers in the area of robot control, to design controllers to autonomously guide the more common mobile platforms.

Download or read book Autonomous Robots written by Farbod Fahimi and published by Springer Science & Business Media. This book was released on 2008-10-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is at least two decades since the conventional robotic manipulators have become a common manufacturing tool for different industries, from automotive to pharmaceutical. The proven benefits of utilizing robotic manipulators for manufacturing in different industries motivated scientists and researchers to try to extend the applications of robots to many other areas by inventing several new types of robots other than conventional manipulators. The new types of robots can be categorized in two groups; redundant (and hyper-redundant) manipulators, and mobile (ground, marine, and aerial) robots. These groups of robots, known as advanced robots, have more freedom for their mobility, which allows them to do tasks that the conventional manipulators cannot do. Engineers have taken advantage of the extra mobility of the advanced robots to make them work in constrained environments, ranging from limited joint motions for redundant (or hyper-redundant) manipulators to obstacles in the way of mobile (ground, marine, and aerial) robots. Since these constraints usually depend on the work environment, they are variable. Engineers have had to invent methods to allow the robots to deal with a variety of constraints automatically. A robot that is equipped with those methods is called an Autonomous Robot. Autonomous Robots: Kinematics, Path Planning, and Control covers the kinematics and dynamic modeling/analysis of Autonomous Robots, as well as the methods suitable for their control. The text is suitable for mechanical and electrical engineers who want to familiarize themselves with methods of modeling/analysis/control that have been proven efficient through research.

Download or read book Planning and Decision Making for Aerial Robots written by Yasmina Bestaoui Sebbane and published by Springer Science & Business Media. This book was released on 2014-01-10 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the emerging field of planning and decision making for aerial robots. An aerial robot is the ultimate form of Unmanned Aerial Vehicle, an aircraft endowed with built-in intelligence, requiring no direct human control and able to perform a specific task. It must be able to fly within a partially structured environment, to react and adapt to changing environmental conditions and to accommodate for the uncertainty that exists in the physical world. An aerial robot can be termed as a physical agent that exists and flies in the real 3D world, can sense its environment and act on it to achieve specific goals. So throughout this book, an aerial robot will also be termed as an agent. Fundamental problems in aerial robotics include the tasks of spatial motion, spatial sensing and spatial reasoning. Reasoning in complex environments represents a difficult problem. The issues specific to spatial reasoning are planning and decision making. Planning deals with the trajectory algorithmic development based on the available information, while decision making determines priorities and evaluates potential environmental uncertainties. The issues specific to planning and decision making for aerial robots in their environment are examined in this book and categorized as follows: motion planning, deterministic decision making, decision making under uncertainty and finally multi-robot planning. A variety of techniques are presented in this book, and a number of relevant case studies are examined. The topics considered in this book are multidisciplinary in nature and lie at the intersection of Robotics, Control Theory, Operational Research and Artificial Intelligence.

Download or read book Theory and Applications for Control of Aerial Robots in Physical Interaction Through Tethers written by Marco Tognon and published by Springer Nature. This book was released on 2020-06-26 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies how autonomous aerial robots physically interact with the surrounding environment. Intended to promote the advancement of aerial physical interaction, it analyzes a particular class of aerial robots: tethered aerial vehicles. By examining specific systems, while still considering the challenges of the general problem, it will help readers acquire the knowledge and expertise needed for the subsequent development of more general methods applicable to aerial physical interaction. The formal analysis covers topics ranging from control, state estimation, and motion planning, to experimental validation. Addressing both theoretical and technical aspects, the book is intended for a broad academic and industrial readership, including undergraduate students, researchers and engineers. It can be used as a teaching reference, or as the basis for product development.

Download or read book Models Algorithms and Architectures for Cooperative Manipulation with Aerial and Ground Robots written by Nicolas Staub and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the subject of physical interaction for aerial robots has been a popular research area with many new mechanical designs and control approaches being proposed. The aerial robotics community is currently observing a paradigm shift from classic guidance, navigation, and control tasks towards more unusual tasks, for example requesting aerial robots to physically interact with the environment, thus extending the manipulation task from the ground into the air. This thesis contributes to the field of aerial manipulation by proposing a novel concept known has Multiple Aerial-Ground Manipulator System or MAGMaS, including what appears to be the first experimental demonstration of a MAGMaS and opening a new route of research. The motivation behind associating ground and aerial robots for cooperative manipulation is to leverage their respective particularities, ground robots bring strength while aerial robots widen the workspace of the system. The first contribution of this work introduces a meticulous system model for MAGMaS. The system model's properties and potential extensions are discussed in this work. The planning, estimation and control methods which are necessary to exploit MAGMaS in a cooperative manipulation tasks are derived. This works proposes an optimal control allocation scheme to exploit the MAGMaS redundancies and a general model-based force estimation method is presented. All of the proposed techniques reported in this thesis are integrated in a global architecture used for simulations and experimental validation. This architecture is extended by the addition of a tele-presence framework to allow remote operations of MAGMaS. The global architecture is validated by robust demonstrations of bar lifting, an application that gives an outlook of the prospective use of the proposed concept of MAGMaS. Another contribution in the development of MAGMaS consists of an exploratory study on the flexibility of manipulated loads. A vibration model is derived and exploited to showcase vibration properties in terms of control. The last contribution of this thesis consists of an exploratory study on the use of elastic joints in aerial robots, endowing these systems with mechanical compliance and energy storage capabilities. Theoretical groundings are associated with a nonlinear controller synthesis. The proposed approach is validated by experimental work which relies on the integration of a lightweight variable stiffness actuator on an aerial robot.

Download or read book Design Modeling and Control of Aerial Robots for Physical Interaction and Manipulation written by Burak Yüksel and published by Logos Verlag Berlin GmbH. This book was released on 2017-06-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robots, meaning robots with flying capabilities, are essentially robotic platforms, which are autonomously controlled via some sophisticated control engineering tools. Similar to aerial vehichles, they can overcome the gravitational forces thanks to their design and/or actuation type. What makes them different from the conventional aerial vehicles, is the level of their autonomy. Reducing the complexity for piloting of such robots/vehicles provide the human operator more freedom and comfort. With their increasing autonomy, they can perform many complicated tasks by their own (such as surveillance, monitoring, or inspection), leaving the human operator the most high-level decisions to be made, if necessary. In this way they can be operated in hazardous and challenging environments, which might posses high risks to the human health. Thanks to their wide range of usage, the ongoing researches on aerial robots is expected to have an increasing impact on the human life. Aerial Physical Interaction (APhI) is a case, in which the aerial robot exerts meaningful forces and torques (wrench) to its environment while preserving its stable flight. In this case, the robot does not try avoiding every obstacle in its environment, but prepare itself for embracing the effect of a physical interaction, furthermore turn this interaction into some meaningful robotic tasks. Aerial manipulation can be considered as a subset of APhI, where the flying robot is designed and controlled in purpose of manipulating its environment. A clear motivation of using aerial robots for physical interaction, is to benefit their great workspace and agility. Moreover, developing robots that can perform not only APhI but also aerial manipulation can bring the great workspace of the flying robots together with the vast dexterity of the manipulating arms. This thesis work is addressing the design, modeling and control problem of these aerial robots for the purpose of physical interaction and manipulation. Using the nonlinear mathematical models of the robots at hand, in this thesis several different control methods (IDA-PBC, Exact Linearization, Differential Flatness Based Control) for APhI and aerial manipulation tasks have been developed and proposed. Furthermore, novel design tools (e.g. new rigid/elastic manipulating arms, hardware, software) to be used together with miniature aerial robots are presented within this thesis, which contributes to the robotics society not only in terms of concrete theory but also practical implementation and experimental robotics.

Download or read book Aerial Robots written by Omar D Lopez Mejia and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few years ago, the topic of aerial robots was exclusively related to the robotics community, so a great number of books about the dynamics and control of aerial robots and UAVs have been written. As the control technology for UAVs advances, the great interaction that exists between other systems and elements that are as important as control such as aerodynamics, energy efficiency, acoustics, structural integrity, and applications, among others has become evident. Aerial Robots - Aerodynamics, Control, and Applications is an attempt to bring some of these topics related to UAVs together in just one book and to look at a selection of the most relevant problems of UAVs in a broader engineering perspective.

Download or read book A First Course in Aerial Robots and Drones written by Yasmina Bestaoui Sebbane and published by CRC Press. This book was released on 2022-02-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: A First Course in Aerial Robots and Drones provides an accessible and student friendly introduction to aerial robots and drones. Drones figure prominently as opportunities for students to learn various aspects of aerospace engineering and design. Drones offer an enticing entry point for STEM studies. As the use of drones in STEM studies grows, there is an emerging generation of drone pilots who are not just good at flying, but experts in specific niches, such as mapping or thermography. Key Features: Focuses on algorithms that are currently used to solve diverse problems. Enables students to solve problems and improve their science skills. Introduces difficult concepts with simple, accessible examples. Suitable for undergraduate students, this textbook provides students and other readers with methods for solving problems and improving their science skills.

Download or read book Aerial Robotics in Agriculture written by K. R. Krishna and published by CRC Press. This book was released on 2021-04-15 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important volume provides a plethora of information on aerial vehicles and their possible roles in revolutionizing agricultural procedures through spectral analysis of terrains, soils, crops, water resources, diseases, floods, drought, and farm activities. There are several semi-autonomous and autonomous (robotic) aerial vehicles that are examined for their efficiency in offering detailed spectral data about agrarian regions and individual farms. Among them, small drone aircrafts such as fixed-winged and copter models have already caught the imagination of farmers. They are spreading fast in every nook and corner of the farm world. However, there are many more aerial robots that are utilized in greater detail during farming. In this volume, the focus is on aerial vehicles such as parafoils, blimps, aerostats, and kites, and how they are being evaluated for use in experimental farms and fields. A few aerial vehicles, such as robotic parafoils, have been adopted to procure aerial spectral data and visual imagery to aid agronomic procedures. These and other aerial robots are expected to change and improve the use of the sky in agricultural endeavors and the way we conduct agronomic procedures in the very near future. This volume is a timely resource for agricultural researchers, professors and students, and the general public who are interested in aerial vehicles.

Download or read book Modeling Control State Estimation and Path Planning Methods for Autonomous Multirotor Aerial Robots written by Christos Papachristos and published by Foundations and Trends (R) in Robotics. This book was released on 2018-12-27 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous aerial systems have recently been at the forefront of robotics research, and currently enjoy a continuously expanding range of applications wherein they are actively utilized. Commonly these are called drones, but this survey of the current state-of-the-art also considers "Micro Aerial Vehicles" in order to emphasize the increasingly advanced levels of autonomy and the small scale of such systems. This monograph provides researchers, engineers and students with a comprehensive overview of core modeling, control, estimation, and planning concepts and approaches for micro aerial robots of the rotorcraft class. A comprehensive description of a set of methods that enable automated flight control, state estimation in GPS-denied environments, as well as path planning techniques for autonomous exploration is also provided, and serves as a holistic point of reference for those interested in the field of unmanned aerial systems. This monograph will be a valuable starting point for researchers and developers working in the exciting area of aerial robots of the rotorcraft class, or drones.

Download or read book Model Based Control of Flying Robots for Robust Interaction Under Wind Influence written by Teodor Tomić and published by Springer Nature. This book was released on 2022-10-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.

Download or read book Nonlinear Control of Vehicles and Robots written by Béla Lantos and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control of Vehicles and Robots develops a unified approach to the dynamic modeling of robots in terrestrial, aerial and marine environments. The main classes of nonlinear systems and stability methods are summarized and basic nonlinear control methods, useful in manipulator and vehicle control, are presented. Formation control of ground robots and ships is discussed. The book also deals with the modeling and control of robotic systems in the presence of non-smooth nonlinearities. Robust adaptive tracking control of robotic systems with unknown payload and friction in the presence of uncertainties is treated. Theoretical and practical aspects of the control algorithms under discussion are detailed. Examples are included throughout the book allowing the reader to apply the control and modeling techniques in their own research and development work. Some of these examples demonstrate state estimation based on the use of advanced sensors as part of the control system.

Download or read book Aerial Robotic Manipulation written by Anibal Ollero and published by Springer. This book was released on 2019-06-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robotic manipulation integrates concepts and technologies coming from unmanned aerial systems and robotics manipulation. It includes not only kinematic, dynamics, aerodynamics and control but also perception, planning, design aspects, mechatronics and cooperation between several aerial robotics manipulators. All these topics are considered in this book in which the main research and development approaches in aerial robotic manipulation are presented, including the description of relevant systems. In addition of the research aspects, the book also includes the deployment of real systems both indoors and outdoors, which is a relevant characteristic of the book because most results of aerial robotic manipulation have been validated only indoor using motion tracking systems. Moreover, the book presents two relevant applications: structure assembly and inspection and maintenance, which has started to be applied in the industry. The Chapters of the book will present results of two main European Robotics Projects in aerial robotics manipulation: FP7 ARCAS and H2020 AEROARMS. FP7 ARCAS defined the basic concepts on aerial robotic manipulation, including cooperative manipulation. The H2020 AEROARMS on aerial robot with multiple arms and advanced manipulation capabilities for inspection and maintenance has two general objectives: (1) development of advanced aerial robotic manipulation methods and technologies, including manipulation with dual arms and multi-directional thrusters aerial platforms; and (2) application to the inspection and maintenance.

Download or read book Aerial Robots Aerodynamics Control and Applications written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ground and Air Robotic Manipulation Systems in Agriculture written by Andrey Ronzhin and published by Springer Nature. This book was released on 2021-09-10 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems of joint application of heterogeneous ground and air robotic means while performing the agricultural technological tasks that require physical interaction with agricultural products and the environment are discussed in the book. Proposed solutions for the exchange of energy and physical resources of unmanned aerial vehicles on ground service platforms, automation of the process of collecting agricultural products and ensuring the stability of the air manipulation system at physical interaction with a ground object are important for the transport and agricultural industry robotization. The book addresses the researchers investigating interdisciplinary issues of agricultural production robotization, problems of information, physical and energy interaction of ground and air robots; recommended to postgraduates and students studying "Mechatronics and robotics" and "Technologies, mechanization and power equipment in agriculture, forestry and fisheries."

Download or read book Aerial Manipulation written by Matko Orsag and published by Springer. This book was released on 2017-09-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a thorough treatment of the rapidly growing area of aerial manipulation. It details all the design steps required for the modeling and control of unmanned aerial vehicles (UAV) equipped with robotic manipulators. Starting with the physical basics of rigid-body kinematics, the book gives an in-depth presentation of local and global coordinates, together with the representation of orientation and motion in fixed- and moving-coordinate systems. Coverage of the kinematics and dynamics of unmanned aerial vehicles is developed in a succession of popular UAV configurations for multirotor systems. Such an arrangement, supported by frequent examples and end-of-chapter exercises, leads the reader from simple to more complex UAV configurations. Propulsion-system aerodynamics, essential in UAV design, is analyzed through blade-element and momentum theories, analysis which is followed by a description of drag and ground-aerodynamic effects. The central part of the book is dedicated to aerial-manipulator kinematics, dynamics, and control. Based on foundations laid in the opening chapters, this portion of the book is a structured presentation of Newton–Euler dynamic modeling that results in forward and backward equations in both fixed- and moving-coordinate systems. The Lagrange–Euler approach is applied to expand the model further, providing formalisms to model the variable moment of inertia later used to analyze the dynamics of aerial manipulators in contact with the environment. Using knowledge from sensor data, insights are presented into the ways in which linear, robust, and adaptive control techniques can be applied in aerial manipulation so as to tackle the real-world problems faced by scholars and engineers in the design and implementation of aerial robotics systems. The book is completed by path and trajectory planning with vision-based examples for tracking and manipulation.

Download or read book Interfaces for Ground and Air Military Robots written by National Research Council and published by National Academies Press. This book was released on 2005-03-21 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early years of robotics and automated vehicles, the fight was against nature and not against a manifestly intelligent opponent. In military environments, however, where prediction and anticipation are complicated by the existence of an intelligent adversary, it is essential to retain human operators in the control loop. Future combat systems will require operators to control and monitor aerial and ground robotic systems and to act as part of larger teams coordinating diverse robotic systems over multiple echelons. The National Research Council organized a workshop to identify the most important human-related research and design issues from both the engineering and human factors perspectives, and develop a list of fruitful research directions. Interfaces for Ground and Air Military Robots summarizes the presentations and discussions from this workshop.