Download or read book Computer Applications in Fermentation Technology Modelling and Control of Biotechnological Processes written by N. M. Fish and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Richard Fox Chairman, Scientific Programme Committee Between 25th and 29th September, 1988, 243 people who either apply or research the use of computers in fermentation gathered together at Robinson College, Cambridge, UK. They came from 30 countries. The conference brought together two traditions. Firstly, it continued the series on Computer Applications in Fermentation Technology (ICCAFT) inaugurated by Henri Blanchere in Dijon in 1973 and carried forward in Philadelphia and Manchester. Secondly, it brought the expertise of the many members of the International Federation of Automatic Control (IFAC), who focused their attention on biotechnology at Noordwijkerhout in the Netherlands in December, 1985. I am happy to say that the tradition carries on and a successor meeting will hopefully take place in the USA in 1991. If you find these proceedings useful or stimulating, then we hope to see you there. We set out to make ICCAFT4 a close-knit friendly conference. We housed all who cared to in Robinson College itself and organised no parallel sessions. Because we, the organisers, experience difficulty with the jargon of our colleagues from other disciplines, we asked Bruce Beck to present a breakfast tutorial on modern control and modelling techniques, and we set up informal panel discussions after dinner on two evenings. Neville Fish chaired a forum on the microbiological principles behind models, while Professors Derek Linkens and Ron Leigh led a discussion on expert systems in control.

Download or read book Modelling and Adaptive Control of Biotechnological Processes written by Marie-France Weirig and published by . This book was released on 1998 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Instrumentation Data Interpretation and Control of Biotechnological Processes written by J.F. van Impe and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outgrowth of the COMETT II Course on Advanced Instru mentation, Data Interpretation, and Control of Biotechnological Processes organized by the Katholieke Universiteit Leuven and the Universiteit Gent, and held at Gent, Belgium, October 1994. The editors of the present volume were very fortunate to find all invited speakers prepared to write state-of-the-art expositions based on their lec tures. Special thanks are due to all of them. The result is an account of recent advances in instrumentation, data interpretation, and model based op timization and control of bioprocesses. For anyone interested in this emerg ing field, this text is of value and provides comprehensive reviews as well as new and important trends and directions for the future, motivated and illustrated by a wealth of applications. The typesetting of all this material represented a tremendous amount of work. I am most grateful to my wife, Myriam Uyttendaele, and to Kurt Gheys, who did most of the proof-reading. Their efforts have increased a lot the uniformity in style and presentation of the different manuscripts. Many thanks also to the co-editors, for their continued support. Kluwer Academic Publishers is gratefully acknowledged for publishing this book, thus contributing to the transfer of the latest research results into large scale industrial applications.

Download or read book Putting Biotechnology to Work written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of the United States to sustain a dominant global position in biotechnology lies in maintaining its primacy in basic life-science research and developing a strong resource base for bioprocess engineering and bioproduct manufacturing. This book examines the status of bioprocessing and biotechnology in the United States; current bioprocess technology, products, and opportunities; and challenges of the future and what must be done to meet those challenges. It gives recommendations for action to provide suitable incentives to establish a national program in bioprocess-engineering research, development, education, and technology transfer.

Download or read book Control of Biotechnological Processes written by Maya Ignatova and published by LAP Lambert Academic Publishing. This book was released on 2011-04 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the book, contemporary approach for monitoring and control of biotechnological processes on new formalization of process kinetics is presented. The new idea is the substrate kinetics to be considered as fully unknown and time-varying. This new formalization allows avoiding widespread conception for bioprocess models with constant yield coefficients. In practice, the model coefficients of such processes with nonlinear nature and low level of reproducibility are time-varying. Different applications and modifications of the proposed approach are presented. The modifications ensue from the process characteristics - process target product and available information. The present book generalizes the long authors' experience with different bioprocesses in food and pharmaceutical industries, in wastewater treatment as well as for bio-fuels production from renewable sources. It is intended as a graduate level text for students in bioengineering as well as a reference text for scientists and engineers involved in bioprocess control design.

Download or read book Computer Control of Fermentation Processes written by Daniel R. Omstead and published by CRC Press. This book was released on 2020-11-25 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume is to describe the components, assembly, and implementation of computer-based process control systems. Presented in two sections, it illustrates how such systems have been used to monitor and control industrial fermentation processes as a means to improve our understanding of product biosynthesis. This book covers the fields of indirect parameter estimation and fermentation-specific control algorithms. It also includes chapters which describe system architecture and process application, process control, on-line liquid sampling and computer system architecture. This is an ideal source for anyone involved with biotechnology, bioengineering, microbial technology, chemical engineering, and computer control.

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by Elsevier. This book was released on 2014-05-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control of Biotechnological Processes contains the proceedings of the International Federation of Automatic Control's First Symposium on Modeling and Control of Biotechnological Processes held in Noordwijkerhout, The Netherlands, on December 11-13, 1985. The papers explore modeling and control of biotechnological processes such as fermentation and biological wastewater treatment. This book consists of 37 chapters divided into 11 sections and begins with a discussion on the control of fermentation processes; modeling of biotechnical processes; and application of measurement and estimation techniques to biotechnology. The following sections focus on adaptive control theory, applications of adaptive control, and control and modeling of bioreactors. The reader is also introduced to measurement techniques and sensors, with emphasis on pyrolysis mass spectrometry; rapid bioelectrochemical methods; and a self-tuning controller for multiloop controlled fed-batch fermentation. The remaining sections deal with parameter identification and estimation; Kalman filtering techniques; optimization of production processes; modeling of microkinetics; and optimization theory. This monograph will be of interest to researchers and practitioners in the field of biotechnology.

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by . This book was released on 1986 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.

Download or read book Modelling and Control of Biotechnological Processes written by Alan Johnson and published by Pergamon. This book was released on 1986 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Developments in Biotechnology and Bioengineering written by Christian Larroche and published by Elsevier. This book was released on 2016-09-17 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends, reviewing industrial biotechnology and bioengineering practices that facilitate and enhance the transition of processes from lab to plant scale, which is becoming increasingly important as such transitions continue to grow in frequency. Focusing on industrial bioprocesses, bioreactors for bioprocesses, and controls for bioprocesses, this title reviews industrial practice to identify bottlenecks and propose solutions, highlighting that the optimal control of a bioprocess involves not only maximization of product yield, but also taking into account parameters such as quality assurance and environmental aspects. Describes industrial bioprocesses based on the reaction media Lists the type of bioreactors used for a specific bioprocess/application Outlines the principles of control systems in various bioprocesses

Download or read book Industrialization of Biology written by National Research Council and published by National Academies Press. This book was released on 2015-06-29 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tremendous progress in biology over the last half century - from Watson and Crick's elucidation of the structure of DNA to today's astonishing, rapid progress in the field of synthetic biology - has positioned us for significant innovation in chemical production. New bio-based chemicals, improved public health through improved drugs and diagnostics, and biofuels that reduce our dependency on oil are all results of research and innovation in the biological sciences. In the past decade, we have witnessed major advances made possible by biotechnology in areas such as rapid, low-cost DNA sequencing, metabolic engineering, and high-throughput screening. The manufacturing of chemicals using biological synthesis and engineering could expand even faster. A proactive strategy - implemented through the development of a technical roadmap similar to those that enabled sustained growth in the semiconductor industry and our explorations of space - is needed if we are to realize the widespread benefits of accelerating the industrialization of biology. Industrialization of Biology presents such a roadmap to achieve key technical milestones for chemical manufacturing through biological routes. This report examines the technical, economic, and societal factors that limit the adoption of bioprocessing in the chemical industry today and which, if surmounted, would markedly accelerate the advanced manufacturing of chemicals via industrial biotechnology. Working at the interface of synthetic chemistry, metabolic engineering, molecular biology, and synthetic biology, Industrialization of Biology identifies key technical goals for next-generation chemical manufacturing, then identifies the gaps in knowledge, tools, techniques, and systems required to meet those goals, and targets and timelines for achieving them. This report also considers the skills necessary to accomplish the roadmap goals, and what training opportunities are required to produce the cadre of skilled scientists and engineers needed.

Download or read book Modelling and Optimization of Biotechnological Processes written by Lei Zhi Chen and published by Springer. This book was released on 2007-07-04 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mostindustrialbiotechnologicalprocessesareoperatedempirically.Oneofthe major di?culties of applying advanced control theories is the highly nonlinear nature of the processes. This book examines approaches based on arti?cial intelligencemethods,inparticular,geneticalgorithmsandneuralnetworks,for monitoring, modelling and optimization of fed-batch fermentation processes. The main aim of a process control is to maximize the ?nal product with minimum development and production costs. This book is interdisciplinary in nature, combining topics from biotechn- ogy, arti?cial intelligence, system identi?cation, process monitoring, process modelling and optimal control. Both simulation and experimental validation are performed in this study to demonstrate the suitability and feasibility of proposed methodologies. An online biomass sensor is constructed using a - current neural network for predicting the biomass concentration online with only three measurements (dissolved oxygen, volume and feed rate). Results show that the proposed sensor is comparable or even superior to other sensors proposed in the literature that use more than three measurements. Biote- nological processes are modelled by cascading two recurrent neural networks. It is found that neural models are able to describe the processes with high accuracy. Optimization of the ?nal product is achieved using modi?ed genetic algorithms to determine optimal feed rate pro?les. Experimental results of the corresponding production yields demonstrate that genetic algorithms are powerful tools for optimization of highly nonlinear systems. Moreover, a c- bination of recurrentneural networks and genetic algorithms provides a useful and cost-e?ective methodology for optimizing biotechnological processes.

Download or read book Sensors in Bioprocess Control written by John Twork and published by CRC Press. This book was released on 2020-07-24 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the reader with an overview of current chemical sensor technology and outlines a framework relating industrial bioprocess monitoring to modern process control technology. It deals with conventional multivariable control technology, focusing on bioprocess applications.

Download or read book Supervision Control and Optimization of Biotechnological Processes written by Rui Manuel Freitas Oliveira and published by . This book was released on 1998 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by . This book was released on 1986 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Preparing for Future Products of Biotechnology written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-07-28 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Between 1973 and 2016, the ways to manipulate DNA to endow new characteristics in an organism (that is, biotechnology) have advanced, enabling the development of products that were not previously possible. What will the likely future products of biotechnology be over the next 5â€"10 years? What scientific capabilities, tools, and/or expertise may be needed by the regulatory agencies to ensure they make efficient and sound evaluations of the likely future products of biotechnology? Preparing for Future Products of Biotechnology analyzes the future landscape of biotechnology products and seeks to inform forthcoming policy making. This report identifies potential new risks and frameworks for risk assessment and areas in which the risks or lack of risks relating to the products of biotechnology are well understood.